[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200520150111.76658-1-paul@crapouillou.net>
Date: Wed, 20 May 2020 17:01:11 +0200
From: Paul Cercueil <paul@...pouillou.net>
To: Bin Liu <b-liu@...com>
Cc: od@...c.me, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org, Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH] usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
The function dma_controller_irq() locks up the exact same spinlock we
locked before calling it, which obviously resulted in a deadlock when
CONFIG_SMP was enabled. This flew under the radar as none of the boards
supported by this driver needs SMP.
Fixes: 57aadb46bd63 ("usb: musb: jz4740: Add support for DMA")
Signed-off-by: Paul Cercueil <paul@...pouillou.net>
---
drivers/usb/musb/jz4740.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index 54e7b30acc69..42c1e8bfc4be 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -69,11 +69,11 @@ static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
irqreturn_t retval = IRQ_NONE, retval_dma = IRQ_NONE;
struct musb *musb = __hci;
- spin_lock_irqsave(&musb->lock, flags);
-
if (IS_ENABLED(CONFIG_USB_INVENTRA_DMA) && musb->dma_controller)
retval_dma = dma_controller_irq(irq, musb->dma_controller);
+ spin_lock_irqsave(&musb->lock, flags);
+
musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
--
2.26.2
Powered by blists - more mailing lists