linux-kernel - Re: [PATCH net-next 1/2] net: hns3: adds support for dynamic VLAN mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 20 May 2020 14:06:17 -0700
From:   Jakub Kicinski <kuba@...nel.org>
To:     Huazhong Tan <tanhuazhong@...wei.com>
Cc:     <davem@...emloft.net>, <netdev@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <salil.mehta@...wei.com>,
        <yisen.zhuang@...wei.com>, <linuxarm@...wei.com>,
        GuoJia Liao <liaoguojia@...wei.com>
Subject: Re: [PATCH net-next 1/2] net: hns3: adds support for dynamic VLAN
 mode

On Wed, 20 May 2020 09:20:12 +0800 Huazhong Tan wrote:
> From: GuoJia Liao <liaoguojia@...wei.com>
> 
> There is a scenario which needs vNICs enable the VLAN filter
> in access port, while disable the VLAN filter in trunk port.
> Access port and trunk port can switch according to the user's
> configuration.
> 
> This patch adds support for the dynamic VLAN mode. then the
> HNS3 driver can support two VLAN modes: default VLAN mode and
> dynamic VLAN mode. User can switch the mode through the
> configuration file.

What configuration file? Sounds like you're reimplementing trusted 
VFs (ndo_set_vf_trust).

> In default VLAN mode, port based VLAN filter and VF VLAN
> filter should always be enabled.
> 
> In dynamic VLAN mode, port based VLAN filter is disabled, and
> VF VLAN filter is disabled defaultly, and should be enabled
> when there is a non-zero VLAN ID. In addition, VF VLAN filter
> is enabled if PVID is enabled for vNIC.
> 
> When enable promisc, VLAN filter should be disabled. When disable
> promisc, VLAN filter's status depends on the value of
> 'vport->vf_vlan_en', which is used to record the VF VLAN filter
> status.
> 
> In default VLAN mode, 'vport->vf_vlan_en' always be 'true', so
> VF VLAN filter will set to be enabled after disabling promisc.
> 
> In dynamic VLAN mode, 'vport->vf_vlan_en' lies on whether there
> is a non-zero VLAN ID.
> 
> Signed-off-by: GuoJia Liao <liaoguojia@...wei.com>
> Signed-off-by: Huazhong Tan <tanhuazhong@...wei.com>