linux-kernel - [PATCH v11] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1589946996-31264-1-git-send-email-pillair@codeaurora.org>
Date:   Wed, 20 May 2020 09:26:36 +0530
From:   Rakesh Pillai <pillair@...eaurora.org>
To:     devicetree@...r.kernel.org
Cc:     linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-arm-msm@...r.kernel.org,
        Rakesh Pillai <pillair@...eaurora.org>
Subject: [PATCH v11] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node

Add device node for the ath10k SNOC platform driver probe
and add resources required for WCN3990 on sc7180 soc.

Signed-off-by: Rakesh Pillai <pillair@...eaurora.org>
---
Changes from v10:
- Corrected the position of wifi node, as per address
- Removed the wlan_fw_mem from reserved memory, since
  its already added as reserved memory in board DT file.
---
 arch/arm64/boot/dts/qcom/sc7180-idp.dts |  7 +++++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi    | 22 ++++++++++++++++++++++
 2 files changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 4e9149d..38b102e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -389,6 +389,13 @@
 	};
 };
 
+&wifi {
+	status = "okay";
+	wifi-firmware {
+		iommus = <&apps_smmu 0xc2 0x1>;
+	};
+};
+
 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
 
 &qspi_clk {
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 6b12c60..da79f8f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2811,6 +2811,28 @@
 
 			#freq-domain-cells = <1>;
 		};
+
+		wifi: wifi@...00000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			iommus = <&apps_smmu 0xc0 0x1>;
+			interrupts =
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
+				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
+			memory-region = <&wlan_mem>;
+			status = "disabled";
+		};
 	};
 
 	thermal-zones {
-- 
2.7.4