| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200520090101.GE271301@dell>
Date: Wed, 20 May 2020 10:01:01 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Neil Armstrong <narmstrong@...libre.com>
Cc: linux-amlogic@...ts.infradead.org, linux-pm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/6] mfd: add support for the Khadas System control
Microcontroller
On Tue, 12 May 2020, Neil Armstrong wrote:
> This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and Edge
> boards.
>
> It has multiple boot control features like password check, power-on
> options, power-off control and system FAN control on recent boards.
>
> This implements a very basic MFD driver with the fan control and User
> NVMEM cells.
>
> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
> ---
> drivers/mfd/Kconfig | 14 ++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/khadas-mcu.c | 143 +++++++++++++++++++++++++++++++++
> include/linux/mfd/khadas-mcu.h | 91 +++++++++++++++++++++
> 4 files changed, 249 insertions(+)
> create mode 100644 drivers/mfd/khadas-mcu.c
> create mode 100644 include/linux/mfd/khadas-mcu.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 0a59249198d3..b95091397052 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -2003,6 +2003,20 @@ config MFD_WCD934X
> This driver provides common support WCD934x audio codec and its
> associated Pin Controller, Soundwire Controller and Audio codec.
>
> +config MFD_KHADAS_MCU
> + tristate "Support for Khadas System control Microcontroller"
> + depends on I2C
> + depends on OF || COMPILE_TEST
> + select MFD_CORE
> + select REGMAP_I2C
> + help
> + Support for the Khadas System control Microcontroller interface present
> + on their VIM and Edge boards.
> +
> + This driver provides common support for accessing the device,
> + additional drivers must be enabled in order to use the functionality
> + of the device.
It would be good to describe the device here.
> menu "Multimedia Capabilities Port drivers"
> depends on ARCH_SA1100
>
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index f935d10cbf0f..0f1633b096bb 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -257,5 +257,6 @@ obj-$(CONFIG_MFD_ROHM_BD70528) += rohm-bd70528.o
> obj-$(CONFIG_MFD_ROHM_BD71828) += rohm-bd71828.o
> obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
> obj-$(CONFIG_MFD_STMFX) += stmfx.o
> +obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
>
> obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
> diff --git a/drivers/mfd/khadas-mcu.c b/drivers/mfd/khadas-mcu.c
> new file mode 100644
> index 000000000000..6d08fa2e373a
> --- /dev/null
> +++ b/drivers/mfd/khadas-mcu.c
> @@ -0,0 +1,143 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for Khadas System control Microcontroller
> + *
> + * Copyright (C) 2020 BayLibre SAS
Nit: '\n' here please.
> + * Author(s): Neil Armstrong <narmstrong@...libre.com>
> + */
> +#include <linux/bitfield.h>
> +#include <linux/i2c.h>
> +#include <linux/mfd/khadas-mcu.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
Alphabetical.
> +static bool khadas_mcu_reg_volatile(struct device *dev, unsigned int reg)
> +{
> + if (reg >= KHADAS_MCU_USER_DATA_0_REG &&
> + reg < KHADAS_MCU_PWR_OFF_CMD_REG)
> + return true;
> +
> + switch (reg) {
> + case KHADAS_MCU_PWR_OFF_CMD_REG:
> + case KHADAS_MCU_PASSWD_START_REG:
> + case KHADAS_MCU_CHECK_VEN_PASSWD_REG:
> + case KHADAS_MCU_CHECK_USER_PASSWD_REG:
> + case KHADAS_MCU_WOL_INIT_START_REG:
> + case KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static bool khadas_mcu_reg_writeable(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case KHADAS_MCU_PASSWD_VEN_0_REG:
> + case KHADAS_MCU_PASSWD_VEN_1_REG:
> + case KHADAS_MCU_PASSWD_VEN_2_REG:
> + case KHADAS_MCU_PASSWD_VEN_3_REG:
> + case KHADAS_MCU_PASSWD_VEN_4_REG:
> + case KHADAS_MCU_PASSWD_VEN_5_REG:
> + case KHADAS_MCU_MAC_0_REG:
> + case KHADAS_MCU_MAC_1_REG:
> + case KHADAS_MCU_MAC_2_REG:
> + case KHADAS_MCU_MAC_3_REG:
> + case KHADAS_MCU_MAC_4_REG:
> + case KHADAS_MCU_MAC_5_REG:
> + case KHADAS_MCU_USID_0_REG:
> + case KHADAS_MCU_USID_1_REG:
> + case KHADAS_MCU_USID_2_REG:
> + case KHADAS_MCU_USID_3_REG:
> + case KHADAS_MCU_USID_4_REG:
> + case KHADAS_MCU_USID_5_REG:
> + case KHADAS_MCU_VERSION_0_REG:
> + case KHADAS_MCU_VERSION_1_REG:
> + case KHADAS_MCU_DEVICE_NO_0_REG:
> + case KHADAS_MCU_DEVICE_NO_1_REG:
> + case KHADAS_MCU_FACTORY_TEST_REG:
> + case KHADAS_MCU_SHUTDOWN_NORMAL_STATUS_REG:
> + return false;
> + default:
> + return true;
> + }
> +}
> +
> +static const struct regmap_config khadas_mcu_regmap_config = {
> + .reg_bits = 8,
> + .reg_stride = 1,
> + .val_bits = 8,
> + .max_register = KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG,
> + .volatile_reg = khadas_mcu_reg_volatile,
> + .writeable_reg = khadas_mcu_reg_writeable,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static struct mfd_cell khadas_mcu_fan_cells[] = {
> + /* Feature supported only on VIM1/2 Rev13+ and VIM3 */
Doesn't read great.
Consider reversing or make the sentence more succinct.
"VIM1/2 Rev13+ and VIM3 only"
> + { .name = "khadas-mcu-fan-ctrl", },
> +};
> +
> +static struct mfd_cell khadas_mcu_cells[] = {
> + /* Features supported on all board revisions */
I think we can omit this.
> + { .name = "khadas-mcu-user-mem", },
> +};
> +
> +static int khadas_mcu_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct khadas_mcu *khadas_mcu;
Prefer a rename to 'ddata'.
> + int ret;
> +
> + khadas_mcu = devm_kzalloc(dev, sizeof(*khadas_mcu), GFP_KERNEL);
> + if (!khadas_mcu)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(client, khadas_mcu);
> +
> + khadas_mcu->dev = dev;
> +
> + khadas_mcu->map = devm_regmap_init_i2c(client,
> + &khadas_mcu_regmap_config);
Prefer a rename to 'regmap'.
> + if (IS_ERR(khadas_mcu->map)) {
> + ret = PTR_ERR(khadas_mcu->map);
> + dev_err(dev, "Failed to allocate register map: %d\n", ret);
> + return ret;
> + }
> +
> + ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
> + khadas_mcu_cells,
> + ARRAY_SIZE(khadas_mcu_cells),
> + NULL, 0, NULL);
> + if (ret)
> + return ret;
> +
> + if (of_find_property(dev->of_node, "#cooling-cells", NULL))
> + return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
> + khadas_mcu_fan_cells,
> + ARRAY_SIZE(khadas_mcu_fan_cells),
> + NULL, 0, NULL);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id khadas_mcu_of_match[] = {
> + { .compatible = "khadas,mcu", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, khadas_mcu_of_match);
> +
> +static struct i2c_driver khadas_mcu_driver = {
> + .driver = {
> + .name = "khadas-mcu-core",
> + .of_match_table = of_match_ptr(khadas_mcu_of_match),
> + },
> + .probe = khadas_mcu_probe,
> +};
> +module_i2c_driver(khadas_mcu_driver);
> +
> +MODULE_DESCRIPTION("Khadas MCU core driver");
> +MODULE_AUTHOR("Neil Armstrong <narmstrong@...libre.com>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/khadas-mcu.h b/include/linux/mfd/khadas-mcu.h
> new file mode 100644
> index 000000000000..2e68af21735c
> --- /dev/null
> +++ b/include/linux/mfd/khadas-mcu.h
> @@ -0,0 +1,91 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Khadas System control Microcontroller Register map
> + *
> + * Copyright (C) 2020 BayLibre SAS
Nit: '\n'
> + * Author(s): Neil Armstrong <narmstrong@...libre.com>
> + */
> +
> +#ifndef MFD_KHADAS_MCU_H
> +#define MFD_KHADAS_MCU_H
> +
> +#define KHADAS_MCU_PASSWD_VEN_0_REG 0x0 /* RO */
Nit: Can you pad these please?
> +#define KHADAS_MCU_PASSWD_VEN_1_REG 0x1 /* RO */
> +#define KHADAS_MCU_PASSWD_VEN_2_REG 0x2 /* RO */
> +#define KHADAS_MCU_PASSWD_VEN_3_REG 0x3 /* RO */
> +#define KHADAS_MCU_PASSWD_VEN_4_REG 0x4 /* RO */
> +#define KHADAS_MCU_PASSWD_VEN_5_REG 0x5 /* RO */
> +#define KHADAS_MCU_MAC_0_REG 0x6 /* RO */
> +#define KHADAS_MCU_MAC_1_REG 0x7 /* RO */
> +#define KHADAS_MCU_MAC_2_REG 0x8 /* RO */
> +#define KHADAS_MCU_MAC_3_REG 0x9 /* RO */
> +#define KHADAS_MCU_MAC_4_REG 0xa /* RO */
> +#define KHADAS_MCU_MAC_5_REG 0xb /* RO */
> +#define KHADAS_MCU_USID_0_REG 0xc /* RO */
> +#define KHADAS_MCU_USID_1_REG 0xd /* RO */
> +#define KHADAS_MCU_USID_2_REG 0xe /* RO */
> +#define KHADAS_MCU_USID_3_REG 0xf /* RO */
> +#define KHADAS_MCU_USID_4_REG 0x10 /* RO */
> +#define KHADAS_MCU_USID_5_REG 0x11 /* RO */
> +#define KHADAS_MCU_VERSION_0_REG 0x12 /* RO */
> +#define KHADAS_MCU_VERSION_1_REG 0x13 /* RO */
> +#define KHADAS_MCU_DEVICE_NO_0_REG 0x14 /* RO */
> +#define KHADAS_MCU_DEVICE_NO_1_REG 0x15 /* RO */
> +#define KHADAS_MCU_FACTORY_TEST_REG 0x16 /* R */
> +#define KHADAS_MCU_BOOT_MODE_REG 0x20 /* RW */
> +#define KHADAS_MCU_BOOT_EN_WOL_REG 0x21 /* RW */
> +#define KHADAS_MCU_BOOT_EN_RTC_REG 0x22 /* RW */
> +#define KHADAS_MCU_BOOT_EN_EXP_REG 0x23 /* RW */
> +#define KHADAS_MCU_BOOT_EN_IR_REG 0x24 /* RW */
> +#define KHADAS_MCU_BOOT_EN_DCIN_REG 0x25 /* RW */
> +#define KHADAS_MCU_BOOT_EN_KEY_REG 0x26 /* RW */
> +#define KHADAS_MCU_KEY_MODE_REG 0x27 /* RW */
> +#define KHADAS_MCU_LED_MODE_ON_REG 0x28 /* RW */
> +#define KHADAS_MCU_LED_MODE_OFF_REG 0x29 /* RW */
> +#define KHADAS_MCU_SHUTDOWN_NORMAL_REG 0x2c /* RW */
> +#define KHADAS_MCU_MAC_SWITCH_REG 0x2d /* RW */
> +#define KHADAS_MCU_MCU_SLEEP_MODE_REG 0x2e /* RW */
> +#define KHADAS_MCU_IR_CODE1_0_REG 0x2f /* RW */
> +#define KHADAS_MCU_IR_CODE1_1_REG 0x30 /* RW */
> +#define KHADAS_MCU_IR_CODE1_2_REG 0x31 /* RW */
> +#define KHADAS_MCU_IR_CODE1_3_REG 0x32 /* RW */
> +#define KHADAS_MCU_USB_PCIE_SWITCH_REG 0x33 /* RW */
> +#define KHADAS_MCU_IR_CODE2_0_REG 0x34 /* RW */
> +#define KHADAS_MCU_IR_CODE2_1_REG 0x35 /* RW */
> +#define KHADAS_MCU_IR_CODE2_2_REG 0x36 /* RW */
> +#define KHADAS_MCU_IR_CODE2_3_REG 0x37 /* RW */
> +#define KHADAS_MCU_PASSWD_USER_0_REG 0x40 /* RW */
> +#define KHADAS_MCU_PASSWD_USER_1_REG 0x41 /* RW */
> +#define KHADAS_MCU_PASSWD_USER_2_REG 0x42 /* RW */
> +#define KHADAS_MCU_PASSWD_USER_3_REG 0x43 /* RW */
> +#define KHADAS_MCU_PASSWD_USER_4_REG 0x44 /* RW */
> +#define KHADAS_MCU_PASSWD_USER_5_REG 0x45 /* RW */
> +#define KHADAS_MCU_USER_DATA_0_REG 0x46 /* RW 56 bytes */
> +#define KHADAS_MCU_PWR_OFF_CMD_REG 0x80 /* WO */
> +#define KHADAS_MCU_PASSWD_START_REG 0x81 /* WO */
> +#define KHADAS_MCU_CHECK_VEN_PASSWD_REG 0x82 /* WO */
> +#define KHADAS_MCU_CHECK_USER_PASSWD_REG 0x83 /* WO */
> +#define KHADAS_MCU_SHUTDOWN_NORMAL_STATUS_REG 0x86 /* RO */
> +#define KHADAS_MCU_WOL_INIT_START_REG 0x87 /* WO */
> +#define KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG 0x88 /* WO */
> +
> +/* Boards */
I think the names make this superfluous.
> +enum {
> + KHADAS_BOARD_VIM1 = 0x1,
> + KHADAS_BOARD_VIM2,
> + KHADAS_BOARD_VIM3,
> + KHADAS_BOARD_EDGE = 0x11,
> + KHADAS_BOARD_EDGE_V,
> +};
> +
> +/**
> + * struct khadas_mcu_data - Khadas MCU MFD structure
Doesn't match the struct name.
Prefer you drop the 'MFD' part.
> + * @device: device reference used for logs
> + * @map: register map
> + */
> +struct khadas_mcu {
> + struct device *dev;
> + struct regmap *map;
> +};
> +
> +#endif /* MFD_KHADAS_MCU_H */
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists