| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200520122027.31320-4-dmurphy@ti.com>
Date: Wed, 20 May 2020 07:20:27 -0500
From: Dan Murphy <dmurphy@...com>
To: <sre@...nel.org>
CC: <sspatil@...roid.com>, <dmurphy@...com>,
<linux-pm@...r.kernel.org>, <robh@...nel.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
Ricardo Rivera-Matos <r-rivera-matos@...com>
Subject: [PATCH v8 3/3] power: supply: bq25150 introduce the bq25150
From: Ricardo Rivera-Matos <r-rivera-matos@...com>
Introduce the bq2515x family of chargers.
The BQ2515X family of devices are highly integrated battery management
ICs that integrate the most common functions for wearable devices
namely a charger, an output voltage rail, ADC for battery and system
monitoring, and a push-button controller.
Datasheets:
bq25150 - http://www.ti.com/lit/ds/symlink/bq25150.pdf
bq25155 - http://www.ti.com/lit/ds/symlink/bq25155.pdf
Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@...com>
---
drivers/power/supply/Kconfig | 13 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/bq2515x_charger.c | 1159 ++++++++++++++++++++++++
3 files changed, 1173 insertions(+)
create mode 100644 drivers/power/supply/bq2515x_charger.c
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index f3424fdce341..266193301e2d 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -589,6 +589,19 @@ config CHARGER_BQ24735
help
Say Y to enable support for the TI BQ24735 battery charger.
+config CHARGER_BQ2515X
+ tristate "TI BQ2515X battery charger family"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the TI BQ2515X family of battery
+ charging integrated circuits. The BQ2515X are highly integrated
+ battery charge management ICs that integrate the most common
+ functions for wearable devices, namely a charger, an output voltage
+ rail, ADC for battery and system monitoring, and push-button
+ controller.
+
config CHARGER_BQ25890
tristate "TI BQ25890 battery charger driver"
depends on I2C
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 6c7da920ea83..8fcc175a7e22 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -80,6 +80,7 @@ obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o
obj-$(CONFIG_CHARGER_BQ24257) += bq24257_charger.o
obj-$(CONFIG_CHARGER_BQ24735) += bq24735-charger.o
+obj-$(CONFIG_CHARGER_BQ2515X) += bq2515x_charger.o
obj-$(CONFIG_CHARGER_BQ25890) += bq25890_charger.o
obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
diff --git a/drivers/power/supply/bq2515x_charger.c b/drivers/power/supply/bq2515x_charger.c
new file mode 100644
index 000000000000..9db5a2e650e7
--- /dev/null
+++ b/drivers/power/supply/bq2515x_charger.c
@@ -0,0 +1,1159 @@
+// SPDX-License-Identifier: GPL-2.0
+// BQ2515X Battery Charger Driver
+// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#define BQ2515X_MANUFACTURER "Texas Instruments"
+
+#define BQ2515X_STAT0 0x00
+#define BQ2515X_STAT1 0x01
+#define BQ2515X_STAT2 0x02
+#define BQ2515X_FLAG0 0x03
+#define BQ2515X_FLAG1 0x04
+#define BQ2515X_FLAG2 0x05
+#define BQ2515X_FLAG3 0x06
+#define BQ2515X_MASK0 0x07
+#define BQ2515X_MASK1 0x08
+#define BQ2515X_MASK2 0x09
+#define BQ2515X_MASK3 0x0a
+#define BQ2515X_VBAT_CTRL 0x12
+#define BQ2515X_ICHG_CTRL 0x13
+#define BQ2515X_PCHRGCTRL 0x14
+#define BQ2515X_TERMCTRL 0x15
+#define BQ2515X_BUVLO 0x16
+#define BQ2515X_CHARGERCTRL0 0x17
+#define BQ2515X_CHARGERCTRL1 0x18
+#define BQ2515X_ILIMCTRL 0x19
+#define BQ2515X_LDOCTRL 0x1d
+#define BQ2515X_MRCTRL 0x30
+#define BQ2515X_ICCTRL0 0x35
+#define BQ2515X_ICCTRL1 0x36
+#define BQ2515X_ICCTRL2 0x37
+#define BQ2515X_ADCCTRL0 0x40
+#define BQ2515X_ADCCTRL1 0x41
+#define BQ2515X_ADC_VBAT_M 0x42
+#define BQ2515X_ADC_VBAT_L 0x43
+#define BQ2515X_ADC_TS_M 0x44
+#define BQ2515X_ADC_TS_L 0x45
+#define BQ2515X_ADC_ICHG_M 0x46
+#define BQ2515X_ADC_ICHG_L 0x47
+#define BQ2515X_ADC_ADCIN_M 0x48
+#define BQ2515X_ADC_ADCIN_L 0x49
+#define BQ2515X_ADC_VIN_M 0x4a
+#define BQ2515X_ADC_VIN_L 0x4b
+#define BQ2515X_ADC_PMID_M 0x4c
+#define BQ2515X_ADC_PMID_L 0x4d
+#define BQ2515X_ADC_IIN_M 0x4e
+#define BQ2515X_ADC_IIN_L 0x4f
+#define BQ2515X_ADC_COMP1_M 0x52
+#define BQ2515X_ADC_COMP1_L 0X53
+#define BQ2515X_ADC_COMP2_M 0X54
+#define BQ2515X_ADC_COMP2_L 0x55
+#define BQ2515X_ADC_COMP3_M 0x56
+#define BQ2515X_ADC_COMP3_L 0x57
+#define BQ2515X_ADC_READ_EN 0x58
+#define BQ2515X_TS_FASTCHGCTRL 0x61
+#define BQ2515X_TS_COLD 0x62
+#define BQ2515X_TS_COOL 0x63
+#define BQ2515X_TS_WARM 0x64
+#define BQ2515X_TS_HOT 0x65
+#define BQ2515X_DEVICE_ID 0x6f
+
+#define BQ2515X_DEFAULT_ICHG_UA 10000
+#define BQ25150_DEFAULT_ILIM_UA 100000
+#define BQ25155_DEFAULT_ILIM_UA 500000
+#define BQ2515X_DEFAULT_VBAT_REG_UV 4200000
+#define BQ2515X_DEFAULT_IPRECHARGE_UA 2500
+
+#define BQ2515X_DIVISOR 65536
+#define BQ2515X_VBAT_BASE_VOLT 3600000
+#define BQ2515X_VBAT_REG_MAX 4600000
+#define BQ2515X_VBAT_REG_MIN 3600000
+#define BQ2515X_VBAT_STEP_UV 10000
+#define BQ2515X_UV_FACTOR 1000000
+#define BQ2515X_VBAT_MULTIPLIER 6
+#define BQ2515X_ICHG_DIVISOR 52429
+#define BQ2515X_ICHG_CURR_STEP_THRESH_UA 318750
+#define BQ2515X_ICHG_MIN_UA 0
+#define BQ2515X_ICHG_MAX_UA 500000
+#define BQ2515X_ICHG_RNG_1B0_UA 1250
+#define BQ2515X_ICHG_RNG_1B1_UA 2500
+#define BQ2515X_VLOWV_SEL_1B0_UV 3000000
+#define BQ2515X_VLOWV_SEL_1B1_UV 2800000
+#define BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA 18750
+#define BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA 37500
+#define BQ2515X_TWAKE2_MIN_US 1700000
+#define BQ2515X_TWAKE2_MAX_US 2300000
+
+#define BQ2515X_ILIM_150MA 0x2
+#define BQ2515X_ILIM_MASK 0x7
+#define BQ2515X_ILIM_MIN 50000
+#define BQ2515X_ILIM_MAX 600000
+#define BQ2515X_HEALTH_MASK 0xf
+#define BQ2515X_ICHGRNG_MASK 0x80
+#define BQ2515X_STAT0_MASK 0x0f
+#define BQ2515X_STAT1_MASK 0x1f
+#define BQ2515X_PRECHARGE_MASK 0x1f
+
+#define BQ2515X_TS_HOT_STAT BIT(0)
+#define BQ2515X_TS_WARM_STAT BIT(1)
+#define BQ2515X_TS_COOL_STAT BIT(2)
+#define BQ2515X_TS_COLD_STAT BIT(3)
+#define BQ2515X_SAFETY_TIMER_EXP BIT(5)
+
+#define BQ2515X_EN_VBAT_READ BIT(3)
+#define BQ2515X_EN_ICHG_READ BIT(5)
+
+#define BQ2515X_VIN_GOOD BIT(0)
+#define BQ2515X_CHRG_DONE BIT(5)
+#define BQ2515X_CV_CHRG_MODE BIT(6)
+
+#define BQ2515X_VIN_OVP_FAULT_STAT BIT(7)
+
+#define BQ2515X_WATCHDOG_DISABLE BIT(4)
+
+#define BQ2515X_ICHARGE_RANGE BIT(7)
+
+#define BQ2515X_VLOWV_SEL BIT(5)
+
+#define BQ2515X_CHARGER_DISABLE BIT(0)
+
+#define BQ2515X_HWRESET_14S_WD BIT(1)
+
+static const int bq2515x_ilim_lvl_values[] = {
+ 50000, 100000, 150000, 200000, 300000, 400000, 500000, 600000
+};
+
+/**
+ * struct bq2515x_init_data -
+ * @ilim: input current limit
+ */
+struct bq2515x_init_data {
+ int ilim;
+};
+
+enum bq2515x_id {
+ BQ25150,
+ BQ25155,
+};
+
+/**
+ * struct bq2515x_device -
+ * @mains: mains properties
+ * @battery: battery properties
+ * @regmap: register map structure
+ * @dev: device structure
+ *
+ * @reset_gpio: manual reset (MR) pin
+ * @lp_gpio: low power mode pin
+ * @ac_detect_gpio: power good (PG) pin
+ * @ce_gpio: charge enable (CE) pin
+ *
+ * @model_name: string value describing device model
+ * @device_id: value of device_id
+ * @mains_online: boolean value indicating power supply online
+ *
+ * @bq2515x_init_data init_data: charger initialization data structure
+ */
+struct bq2515x_device {
+ struct power_supply *mains;
+ struct power_supply *battery;
+ struct regmap *regmap;
+ struct device *dev;
+
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *lp_gpio;
+ struct gpio_desc *ac_detect_gpio;
+ struct gpio_desc *ce_gpio;
+
+ char model_name[I2C_NAME_SIZE];
+ int device_id;
+ bool mains_online;
+
+ struct bq2515x_init_data init_data;
+};
+
+static struct reg_default bq25150_reg_defaults[] = {
+ {BQ2515X_FLAG0, 0x0},
+ {BQ2515X_FLAG1, 0x0},
+ {BQ2515X_FLAG2, 0x0},
+ {BQ2515X_FLAG3, 0x0},
+ {BQ2515X_MASK0, 0x0},
+ {BQ2515X_MASK1, 0x0},
+ {BQ2515X_MASK2, 0x71},
+ {BQ2515X_MASK3, 0x0},
+ {BQ2515X_VBAT_CTRL, 0x3C},
+ {BQ2515X_ICHG_CTRL, 0x8},
+ {BQ2515X_PCHRGCTRL, 0x2},
+ {BQ2515X_TERMCTRL, 0x14},
+ {BQ2515X_BUVLO, 0x0},
+ {BQ2515X_CHARGERCTRL0, 0x82},
+ {BQ2515X_CHARGERCTRL1, 0x42},
+ {BQ2515X_ILIMCTRL, 0x1},
+ {BQ2515X_LDOCTRL, 0xB0},
+ {BQ2515X_MRCTRL, 0x2A},
+ {BQ2515X_ICCTRL0, 0x10},
+ {BQ2515X_ICCTRL1, 0x0},
+ {BQ2515X_ICCTRL2, 0x0},
+ {BQ2515X_ADCCTRL0, 0x2},
+ {BQ2515X_ADCCTRL1, 0x40},
+ {BQ2515X_ADC_COMP1_M, 0x23},
+ {BQ2515X_ADC_COMP1_L, 0x20},
+ {BQ2515X_ADC_COMP2_M, 0x38},
+ {BQ2515X_ADC_COMP2_L, 0x90},
+ {BQ2515X_ADC_COMP3_M, 0x0},
+ {BQ2515X_ADC_COMP3_L, 0x0},
+ {BQ2515X_ADC_READ_EN, 0x0},
+ {BQ2515X_TS_FASTCHGCTRL, 0x34},
+ {BQ2515X_TS_COLD, 0x7C},
+ {BQ2515X_TS_COOL, 0x6D},
+ {BQ2515X_TS_WARM, 0x38},
+ {BQ2515X_TS_HOT, 0x27},
+ {BQ2515X_DEVICE_ID, 0x20},
+};
+
+static struct reg_default bq25155_reg_defaults[] = {
+ {BQ2515X_FLAG0, 0x0},
+ {BQ2515X_FLAG1, 0x0},
+ {BQ2515X_FLAG2, 0x0},
+ {BQ2515X_FLAG3, 0x0},
+ {BQ2515X_MASK0, 0x0},
+ {BQ2515X_MASK1, 0x0},
+ {BQ2515X_MASK2, 0x71},
+ {BQ2515X_MASK3, 0x0},
+ {BQ2515X_VBAT_CTRL, 0x3C},
+ {BQ2515X_ICHG_CTRL, 0x8},
+ {BQ2515X_PCHRGCTRL, 0x2},
+ {BQ2515X_TERMCTRL, 0x14},
+ {BQ2515X_BUVLO, 0x0},
+ {BQ2515X_CHARGERCTRL0, 0x82},
+ {BQ2515X_CHARGERCTRL1, 0xC2},
+ {BQ2515X_ILIMCTRL, 0x6},
+ {BQ2515X_LDOCTRL, 0xB0},
+ {BQ2515X_MRCTRL, 0x2A},
+ {BQ2515X_ICCTRL0, 0x10},
+ {BQ2515X_ICCTRL1, 0x0},
+ {BQ2515X_ICCTRL2, 0x40},
+ {BQ2515X_ADCCTRL0, 0x2},
+ {BQ2515X_ADCCTRL1, 0x40},
+ {BQ2515X_ADC_COMP1_M, 0x23},
+ {BQ2515X_ADC_COMP1_L, 0x20},
+ {BQ2515X_ADC_COMP2_M, 0x38},
+ {BQ2515X_ADC_COMP2_L, 0x90},
+ {BQ2515X_ADC_COMP3_M, 0x0},
+ {BQ2515X_ADC_COMP3_L, 0x0},
+ {BQ2515X_ADC_READ_EN, 0x0},
+ {BQ2515X_TS_FASTCHGCTRL, 0x34},
+ {BQ2515X_TS_COLD, 0x7C},
+ {BQ2515X_TS_COOL, 0x6D},
+ {BQ2515X_TS_WARM, 0x38},
+ {BQ2515X_TS_HOT, 0x27},
+ {BQ2515X_DEVICE_ID, 0x35},
+};
+
+static int bq2515x_wake_up(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ int val;
+
+ /* Read the STAT register if we can read it then the device is out
+ * of ship mode. If the register cannot be read then attempt to wake
+ * it up and enable the ADC.
+ */
+ ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
+ if (ret)
+ return ret;
+
+ /* Need to toggle LP and bring device out of ship mode. The device
+ * will exit the ship mode when the MR pin is held low for at least
+ * t_WAKE2 as shown in section 8.3.7.1 of the datasheet.
+ */
+ gpiod_set_value_cansleep(bq2515x->lp_gpio, 0);
+
+ gpiod_set_value_cansleep(bq2515x->reset_gpio, 0);
+ usleep_range(BQ2515X_TWAKE2_MIN_US, BQ2515X_TWAKE2_MAX_US);
+ gpiod_set_value_cansleep(bq2515x->reset_gpio, 1);
+
+ return regmap_write(bq2515x->regmap, BQ2515X_ADC_READ_EN,
+ (BQ2515X_EN_VBAT_READ | BQ2515X_EN_ICHG_READ));
+}
+
+static int bq2515x_update_ps_status(struct bq2515x_device *bq2515x)
+{
+ bool dc = false;
+ unsigned int val;
+ int ret;
+
+ if (bq2515x->ac_detect_gpio)
+ val = gpiod_get_value_cansleep(bq2515x->ac_detect_gpio);
+ else {
+ ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
+ if (ret)
+ return ret;
+ }
+
+ dc = val & BQ2515X_VIN_GOOD;
+
+ ret = bq2515x->mains_online != dc;
+
+ bq2515x->mains_online = dc;
+
+ return ret;
+}
+
+static int bq2515x_disable_watchdog_timers(struct bq2515x_device *bq2515x)
+{
+ int ret;
+
+ ret = regmap_update_bits(bq2515x->regmap, BQ2515X_CHARGERCTRL0,
+ BQ2515X_WATCHDOG_DISABLE, BQ2515X_WATCHDOG_DISABLE);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
+ BQ2515X_HWRESET_14S_WD, 0);
+}
+
+static int bq2515x_get_battery_voltage_now(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ int vbat_msb;
+ int vbat_lsb;
+ uint32_t vbat_measurement;
+
+ if (!bq2515x->mains_online)
+ bq2515x_wake_up(bq2515x);
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_M, &vbat_msb);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_L, &vbat_lsb);
+ if (ret)
+ return ret;
+
+ vbat_measurement = (vbat_msb << 8) | vbat_lsb;
+
+ return vbat_measurement * (BQ2515X_UV_FACTOR / BQ2515X_DIVISOR) *
+ BQ2515X_VBAT_MULTIPLIER;
+}
+
+static int bq2515x_get_battery_current_now(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ int ichg_msb;
+ int ichg_lsb;
+ uint32_t ichg_measurement;
+ u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ unsigned int ichg_reg_code, reg_code;
+ unsigned int icharge_range = 0, pchrgctrl;
+ unsigned int buvlo, vlowv_sel, vlowv = BQ2515X_VLOWV_SEL_1B0_UV;
+
+ if (!bq2515x->mains_online)
+ return -ENODATA;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_M, &ichg_msb);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_L, &ichg_lsb);
+ if (ret)
+ return ret;
+
+ ichg_measurement = (ichg_msb << 8) | ichg_lsb;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_BUVLO, &buvlo);
+ if (ret)
+ return ret;
+
+ vlowv_sel = buvlo & BQ2515X_VLOWV_SEL;
+
+ if (vlowv_sel)
+ vlowv = BQ2515X_VLOWV_SEL_1B1_UV;
+
+ if (bq2515x_get_battery_voltage_now(bq2515x) < vlowv) {
+ ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL,
+ &pchrgctrl);
+ if (ret)
+ return ret;
+
+ reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
+ } else {
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL,
+ &ichg_reg_code);
+ if (ret)
+ return ret;
+
+ reg_code = ichg_reg_code;
+ }
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+ if (ret)
+ return ret;
+
+ icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+ if (icharge_range)
+ ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+
+ return reg_code * (ichg_multiplier * ichg_measurement /
+ BQ2515X_ICHG_DIVISOR);
+}
+
+static bool bq2515x_get_charge_disable(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ int ce_pin;
+ int icctrl2;
+ int charger_disable;
+
+ ce_pin = gpiod_get_value_cansleep(bq2515x->ce_gpio);
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ICCTRL2, &icctrl2);
+ if (ret)
+ return ret;
+
+ charger_disable = icctrl2 & BQ2515X_CHARGER_DISABLE;
+
+ if (charger_disable || ce_pin)
+ return true;
+
+ return false;
+}
+
+static int bq2515x_set_charge_disable(struct bq2515x_device *bq2515x, int val)
+{
+ gpiod_set_value_cansleep(bq2515x->ce_gpio, val);
+
+ return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
+ BQ2515X_CHARGER_DISABLE, val);
+}
+
+static int bq2515x_get_const_charge_current(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ unsigned int ichg_reg_code;
+ unsigned int pchrgctrl;
+ unsigned int icharge_range;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, &ichg_reg_code);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+ if (ret)
+ return ret;
+
+ icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+ if (icharge_range)
+ ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+
+ return ichg_reg_code * ichg_multiplier;
+}
+
+static int bq2515x_set_const_charge_current(struct bq2515x_device *bq2515x,
+ int val)
+{
+ int ret;
+ unsigned int ichg_reg_code;
+ u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ unsigned int icharge_range = 0;
+
+ if (val > BQ2515X_ICHG_MAX_UA || val < BQ2515X_ICHG_MIN_UA)
+ return -EINVAL;
+
+ if (val > BQ2515X_ICHG_CURR_STEP_THRESH_UA) {
+ ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+ icharge_range = BQ2515X_ICHARGE_RANGE;
+ }
+
+ bq2515x_set_charge_disable(bq2515x, 1);
+
+ ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
+ BQ2515X_ICHARGE_RANGE, icharge_range);
+ if (ret)
+ return ret;
+
+ ichg_reg_code = val / ichg_multiplier;
+
+ ret = regmap_write(bq2515x->regmap, BQ2515X_ICHG_CTRL, ichg_reg_code);
+ if (ret)
+ return ret;
+
+ return bq2515x_set_charge_disable(bq2515x, 0);
+}
+
+static int bq2515x_get_precharge_current(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ unsigned int pchrgctrl;
+ unsigned int icharge_range;
+ u16 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ unsigned int precharge_reg_code;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+ if (ret)
+ return ret;
+
+ icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+ if (icharge_range)
+ precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+
+ precharge_reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
+
+ return precharge_reg_code * precharge_multiplier;
+}
+
+static int bq2515x_set_precharge_current(struct bq2515x_device *bq2515x,
+ int val)
+{
+ int ret;
+ unsigned int pchrgctrl;
+ unsigned int icharge_range;
+ unsigned int precharge_reg_code;
+ u16 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ u16 precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+ if (ret)
+ return ret;
+
+ icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+ if (icharge_range) {
+ precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA;
+ precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+ }
+ if (val > precharge_max_ua || val < BQ2515X_ICHG_MIN_UA)
+ return -EINVAL;
+
+ precharge_reg_code = val / precharge_multiplier;
+
+ ret = bq2515x_set_charge_disable(bq2515x, 1);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
+ BQ2515X_PRECHARGE_MASK, precharge_reg_code);
+ if (ret)
+ return ret;
+
+ return bq2515x_set_charge_disable(bq2515x, 0);
+}
+
+static int bq2515x_charging_status(struct bq2515x_device *bq2515x,
+ union power_supply_propval *val)
+{
+ bool status0_no_fault;
+ bool status1_no_fault;
+ bool ce_status;
+ bool charge_done;
+ unsigned int status;
+ int ret;
+
+ if (!bq2515x->mains_online) {
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ return 0;
+ }
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &status);
+ if (ret)
+ return ret;
+
+ /*
+ * The code block below is used to determine if any faults from the
+ * STAT0 register are disbaling charging or if the charge has completed
+ * according to the CHARGE_DONE_STAT bit.
+ */
+ if (((status & BQ2515X_STAT0_MASK) == true) &
+ ((status & BQ2515X_CHRG_DONE) == false)) {
+ status0_no_fault = true;
+ charge_done = false;
+ } else if (status & BQ2515X_CHRG_DONE) {
+ charge_done = true;
+ status0_no_fault = false;
+ } else {
+ status0_no_fault = false;
+ charge_done = false;
+ }
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &status);
+ if (ret)
+ return ret;
+ /*
+ * The code block below is used to determine if any faults from the
+ * STAT1 register are disbaling charging
+ */
+ if ((status & BQ2515X_STAT1_MASK) == false)
+ status1_no_fault = true;
+ else
+ status1_no_fault = false;
+
+ ce_status = (!bq2515x_get_charge_disable(bq2515x));
+
+ /*
+ * If there are no faults and charging is enabled, then status is
+ * charging. Otherwise, if charging is complete, then status is full.
+ * Otherwise, if a fault exists or charging is disabled, then status is
+ * not charging
+ */
+ if (status0_no_fault & status1_no_fault & ce_status)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (charge_done)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else if (!(status0_no_fault & status1_no_fault & ce_status))
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+ return 0;
+}
+
+static int bq2515x_get_batt_reg(struct bq2515x_device *bq2515x)
+{
+ int vbat_reg_code;
+ int ret;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_VBAT_CTRL, &vbat_reg_code);
+ if (ret)
+ return ret;
+
+ return BQ2515X_VBAT_BASE_VOLT + vbat_reg_code * BQ2515X_VBAT_STEP_UV;
+}
+
+static int bq2515x_set_batt_reg(struct bq2515x_device *bq2515x, int val)
+{
+ int vbat_reg_code;
+
+ if (val > BQ2515X_VBAT_REG_MAX || val < BQ2515X_VBAT_REG_MIN)
+ return -EINVAL;
+
+ vbat_reg_code = (val - BQ2515X_VBAT_BASE_VOLT) / BQ2515X_VBAT_STEP_UV;
+
+ return regmap_write(bq2515x->regmap, BQ2515X_VBAT_CTRL, vbat_reg_code);
+}
+
+static int bq2515x_get_ilim_lvl(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ int ilimctrl;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ILIMCTRL, &ilimctrl);
+ if (ret)
+ return ret;
+
+ return bq2515x_ilim_lvl_values[ilimctrl & BQ2515X_ILIM_MASK];
+}
+
+static int bq2515x_set_ilim_lvl(struct bq2515x_device *bq2515x, int val)
+{
+ int i = 0;
+ unsigned int array_size = ARRAY_SIZE(bq2515x_ilim_lvl_values);
+
+ if (val >= bq2515x_ilim_lvl_values[array_size - 1]) {
+ i = array_size - 1;
+ } else {
+ for (i = array_size - 1; i > 0; i--) {
+ if (val >= bq2515x_ilim_lvl_values[i])
+ break;
+ }
+ }
+ return regmap_write(bq2515x->regmap, BQ2515X_ILIMCTRL, i);
+}
+
+static int bq2515x_power_supply_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property prop)
+{
+ switch (prop) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int bq2515x_charger_get_health(struct bq2515x_device *bq2515x,
+ union power_supply_propval *val)
+{
+ int health = POWER_SUPPLY_HEALTH_GOOD;
+ int ret;
+ unsigned int stat1;
+ unsigned int flag3;
+
+ if (!bq2515x->mains_online)
+ bq2515x_wake_up(bq2515x);
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_FLAG3, &flag3);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &stat1);
+ if (ret)
+ return ret;
+
+ if (stat1 & BQ2515X_HEALTH_MASK) {
+ switch (stat1 & BQ2515X_HEALTH_MASK) {
+ case BQ2515X_TS_HOT_STAT:
+ health = POWER_SUPPLY_HEALTH_HOT;
+ break;
+ case BQ2515X_TS_WARM_STAT:
+ health = POWER_SUPPLY_HEALTH_WARM;
+ break;
+ case BQ2515X_TS_COOL_STAT:
+ health = POWER_SUPPLY_HEALTH_COOL;
+ break;
+ case BQ2515X_TS_COLD_STAT:
+ health = POWER_SUPPLY_HEALTH_COLD;
+ break;
+ default:
+ health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ break;
+ }
+ }
+
+ if (stat1 & BQ2515X_VIN_OVP_FAULT_STAT)
+ health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+
+ if (flag3 & BQ2515X_SAFETY_TIMER_EXP)
+ health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+
+ val->intval = health;
+ return 0;
+}
+
+static int bq2515x_mains_set_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ const union power_supply_propval *val)
+{
+ struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+ int ret;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = bq2515x_set_ilim_lvl(bq2515x, val->intval);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int bq2515x_battery_set_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ const union power_supply_propval *val)
+{
+ struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+ int ret;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = bq2515x_set_batt_reg(bq2515x, val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = bq2515x_set_const_charge_current(bq2515x, val->intval);
+ break;
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ ret = bq2515x_set_precharge_current(bq2515x, val->intval);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int bq2515x_mains_get_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = bq2515x->mains_online;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = bq2515x_charger_get_health(bq2515x, val);
+ if (ret)
+ val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+ break;
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = bq2515x_get_ilim_lvl(bq2515x);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = bq2515x->model_name;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = BQ2515X_MANUFACTURER;
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = bq2515x_charging_status(bq2515x, val);
+ if (ret)
+ return ret;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int bq2515x_battery_get_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+ int ret;
+
+ ret = bq2515x_update_ps_status(bq2515x);
+ if (ret)
+ return ret;
+
+ switch (prop) {
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = bq2515x_get_battery_voltage_now(bq2515x);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = bq2515x_get_battery_current_now(bq2515x);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = bq2515x_get_const_charge_current(bq2515x);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ ret = bq2515x_get_precharge_current(bq2515x);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = bq2515x_get_batt_reg(bq2515x);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static enum power_supply_property bq2515x_battery_properties[] = {
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+};
+
+static enum power_supply_property bq2515x_mains_properties[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static struct power_supply_desc bq2515x_mains_desc = {
+ .name = "bq2515x-mains",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .get_property = bq2515x_mains_get_property,
+ .set_property = bq2515x_mains_set_property,
+ .properties = bq2515x_mains_properties,
+ .num_properties = ARRAY_SIZE(bq2515x_mains_properties),
+ .property_is_writeable = bq2515x_power_supply_property_is_writeable,
+};
+
+static struct power_supply_desc bq2515x_battery_desc = {
+ .name = "bq2515x-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .get_property = bq2515x_battery_get_property,
+ .set_property = bq2515x_battery_set_property,
+ .properties = bq2515x_battery_properties,
+ .num_properties = ARRAY_SIZE(bq2515x_battery_properties),
+ .property_is_writeable = bq2515x_power_supply_property_is_writeable,
+};
+
+static int bq2515x_power_supply_register(struct bq2515x_device *bq2515x,
+ struct device *dev, struct power_supply_config psy_cfg)
+{
+ bq2515x->mains = devm_power_supply_register(bq2515x->dev,
+ &bq2515x_mains_desc,
+ &psy_cfg);
+ if (IS_ERR(bq2515x->mains))
+ return -EINVAL;
+
+ bq2515x->battery = devm_power_supply_register(bq2515x->dev,
+ &bq2515x_battery_desc,
+ &psy_cfg);
+ if (IS_ERR(bq2515x->battery))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int bq2515x_hw_init(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ struct power_supply_battery_info bat_info = { };
+
+ ret = bq2515x_disable_watchdog_timers(bq2515x);
+ if (ret)
+ return ret;
+
+ if (bq2515x->init_data.ilim) {
+ ret = bq2515x_set_ilim_lvl(bq2515x, bq2515x->init_data.ilim);
+ if (ret)
+ return ret;
+ }
+
+ ret = power_supply_get_battery_info(bq2515x->mains, &bat_info);
+ if (ret) {
+ dev_warn(bq2515x->dev, "battery info missing, default values will be applied\n");
+
+ bat_info.constant_charge_current_max_ua =
+ BQ2515X_DEFAULT_ICHG_UA;
+
+ bat_info.constant_charge_voltage_max_uv =
+ BQ2515X_DEFAULT_VBAT_REG_UV;
+
+ bat_info.precharge_current_ua =
+ BQ2515X_DEFAULT_IPRECHARGE_UA;
+ }
+
+ ret = bq2515x_set_const_charge_current(bq2515x,
+ bat_info.constant_charge_current_max_ua);
+ if (ret)
+ return ret;
+
+ ret = bq2515x_set_batt_reg(bq2515x,
+ bat_info.constant_charge_voltage_max_uv);
+ if (ret)
+ return ret;
+
+ return bq2515x_set_precharge_current(bq2515x,
+ bat_info.precharge_current_ua);
+}
+
+static int bq2515x_read_properties(struct bq2515x_device *bq2515x)
+{
+ int ret;
+
+ ret = device_property_read_u32(bq2515x->dev,
+ "input-current-limit-microamp",
+ &bq2515x->init_data.ilim);
+ if (ret)
+ switch (bq2515x->device_id) {
+ case BQ25150:
+ bq2515x->init_data.ilim = BQ25150_DEFAULT_ILIM_UA;
+ break;
+ case BQ25155:
+ bq2515x->init_data.ilim = BQ25155_DEFAULT_ILIM_UA;
+ break;
+ }
+
+ bq2515x->ac_detect_gpio = devm_gpiod_get_optional(bq2515x->dev,
+ "ac-detect", GPIOD_IN);
+ if (IS_ERR(bq2515x->ac_detect_gpio)) {
+ ret = PTR_ERR(bq2515x->ac_detect_gpio);
+ if (ret != -ENODEV) {
+ dev_err(bq2515x->dev, "Failed to get ac detect");
+ return ret;
+ }
+ bq2515x->ac_detect_gpio = NULL;
+ }
+
+ bq2515x->reset_gpio = devm_gpiod_get_optional(bq2515x->dev,
+ "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(bq2515x->reset_gpio)) {
+ ret = PTR_ERR(bq2515x->reset_gpio);
+ if (ret != -ENODEV) {
+ dev_err(bq2515x->dev, "Failed to get reset");
+ return ret;
+ }
+ bq2515x->reset_gpio = NULL;
+ }
+
+ bq2515x->lp_gpio = devm_gpiod_get_optional(bq2515x->dev, "low-power",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(bq2515x->lp_gpio)) {
+ ret = PTR_ERR(bq2515x->lp_gpio);
+ if (ret != -ENODEV) {
+ dev_err(bq2515x->dev, "Failed to get low power");
+ return ret;
+ }
+ bq2515x->lp_gpio = NULL;
+ }
+
+ bq2515x->ce_gpio = devm_gpiod_get_optional(bq2515x->dev,
+ "charge-enable",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(bq2515x->ce_gpio)) {
+ ret = PTR_ERR(bq2515x->ce_gpio);
+ if (ret != -ENODEV) {
+ dev_err(bq2515x->dev, "Failed to get ce");
+ return ret;
+ }
+ bq2515x->ce_gpio = NULL;
+ }
+
+ return 0;
+}
+
+static bool bq2515x_volatile_register(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case BQ2515X_STAT0 ... BQ2515X_FLAG3:
+ case BQ2515X_ADC_VBAT_M ... BQ2515X_ADC_IIN_L:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config bq25150_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = BQ2515X_DEVICE_ID,
+ .reg_defaults = bq25150_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(bq25150_reg_defaults),
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = bq2515x_volatile_register,
+};
+
+static const struct regmap_config bq25155_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = BQ2515X_DEVICE_ID,
+ .reg_defaults = bq25155_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(bq25155_reg_defaults),
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = bq2515x_volatile_register,
+};
+
+static int bq2515x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct bq2515x_device *bq2515x;
+ struct power_supply_config charger_cfg = {};
+ int ret;
+
+ bq2515x = devm_kzalloc(dev, sizeof(*bq2515x), GFP_KERNEL);
+ if (!bq2515x)
+ return -ENOMEM;
+
+ bq2515x->dev = dev;
+
+ strncpy(bq2515x->model_name, id->name, I2C_NAME_SIZE);
+
+ bq2515x->device_id = id->driver_data;
+
+ switch (bq2515x->device_id) {
+ case BQ25150:
+ bq2515x->regmap = devm_regmap_init_i2c(client,
+ &bq25150_regmap_config);
+ break;
+ case BQ25155:
+ bq2515x->regmap = devm_regmap_init_i2c(client,
+ &bq25155_regmap_config);
+ break;
+ }
+
+ if (IS_ERR(bq2515x->regmap)) {
+ dev_err(dev, "failed to allocate register map\n");
+ return PTR_ERR(bq2515x->regmap);
+ }
+
+ i2c_set_clientdata(client, bq2515x);
+
+ charger_cfg.drv_data = bq2515x;
+ charger_cfg.of_node = dev->of_node;
+
+ ret = bq2515x_read_properties(bq2515x);
+ if (ret) {
+ dev_err(dev, "Failed to read device tree properties %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = bq2515x_power_supply_register(bq2515x, dev, charger_cfg);
+ if (ret) {
+ dev_err(dev, "failed to register power supply\n");
+ return ret;
+ }
+
+ ret = bq2515x_hw_init(bq2515x);
+ if (ret) {
+ dev_err(dev, "Cannot initialize the chip\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id bq2515x_i2c_ids[] = {
+ { "bq25150", BQ25150, },
+ { "bq25155", BQ25155, },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, bq2515x_i2c_ids);
+
+static const struct of_device_id bq2515x_of_match[] = {
+ { .compatible = "ti,bq25150", },
+ { .compatible = "ti,bq25155", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bq2515x_of_match);
+
+static struct i2c_driver bq2515x_driver = {
+ .driver = {
+ .name = "bq2515x-charger",
+ .of_match_table = bq2515x_of_match,
+ },
+ .probe = bq2515x_probe,
+ .id_table = bq2515x_i2c_ids,
+};
+module_i2c_driver(bq2515x_driver);
+
+MODULE_AUTHOR("Dan Murphy <dmurphy@...com>");
+MODULE_AUTHOR("Ricardo Rivera-Matos <r-rivera-matos@...com>");
+MODULE_DESCRIPTION("BQ2515X charger driver");
+MODULE_LICENSE("GPL v2");
--
2.26.2
Powered by blists - more mailing lists