[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1590006865-20900-8-git-send-email-yibin.gong@nxp.com>
Date: Thu, 21 May 2020 04:34:19 +0800
From: Robin Gong <yibin.gong@....com>
To: mark.rutland@....com, broonie@...nel.org, robh+dt@...nel.org,
catalin.marinas@....com, vkoul@...nel.org, will.deacon@....com,
shawnguo@...nel.org, festevam@...il.com, s.hauer@...gutronix.de,
martin.fuzzey@...wbird.group, u.kleine-koenig@...gutronix.de,
dan.j.williams@...el.com
Cc: linux-spi@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
kernel@...gutronix.de, linux-imx@....com
Subject: [PATCH v8 07/13] spi: imx: fix ERR009165
Change to XCH mode even in dma mode, please refer to the below
errata:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
Signed-off-by: Robin Gong <yibin.gong@....com>
Acked-by: Mark Brown <broonie@...nel.org>
---
drivers/spi/spi-imx.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index b7a85e3..8f758db 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -591,8 +591,8 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk);
spi_imx->spi_bus_clk = clk;
- if (spi_imx->usedma)
- ctrl |= MX51_ECSPI_CTRL_SMC;
+ /* ERR009165: work in XHC mode as PIO */
+ ctrl &= ~MX51_ECSPI_CTRL_SMC;
writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
@@ -623,7 +623,7 @@ static void mx51_setup_wml(struct spi_imx_data *spi_imx)
* and enable DMA request.
*/
writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
- MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
+ MX51_ECSPI_DMA_TX_WML(0) |
MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
@@ -1273,10 +1273,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
{
int ret;
- /* use pio mode for i.mx6dl chip TKT238285 */
- if (of_machine_is_compatible("fsl,imx6dl"))
- return 0;
-
spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
/* Prepare for TX DMA: */
--
2.7.4
Powered by blists - more mailing lists