linux-kernel - Re: [PATCH v2 1/1] dt-bindings: spi: Add schema for Cadence QSPI Controller driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <fd086da7-7e18-83bc-d423-56095b0cff96@linux.intel.com>
Date:   Thu, 21 May 2020 10:18:26 +0800
From:   "Ramuthevar, Vadivel MuruganX" 
        <vadivel.muruganx.ramuthevar@...ux.intel.com>
To:     Mark Brown <broonie@...nel.org>
Cc:     robh@...nel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-mtd@...ts.infradead.org,
        linux-spi@...r.kernel.org, vigneshr@...com,
        cheol.yong.kim@...el.com, qi-ming.wu@...el.com
Subject: Re: [PATCH v2 1/1] dt-bindings: spi: Add schema for Cadence QSPI
 Controller driver

Hi Mark,

  Thank you for the review comments...

On 20/5/2020 8:43 pm, Mark Brown wrote:
> On Wed, May 20, 2020 at 08:36:12PM +0800, Ramuthevar,Vadivel MuruganX wrote:
>> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@...ux.intel.com>
>>
>> Add dt-bindings documentation for Cadence-QSPI controller to support
>> spi based flash memories.
>>
>> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@...ux.intel.com>
>> ---
>>   .../devicetree/bindings/mtd/cadence-quadspi.txt    |  67 -----------
>>   .../devicetree/bindings/spi/cdns,qspi-nor.yaml     | 133 +++++++++++++++++++++
> 
> The changelog says this is adding a new binding but the actual change is
> mostly a conversion to YAML.  Please split the additions out into a
> separate change, ideally doing that before the conversion since there is
> a backlog on review of YAML conversions.

Initially was sending the only YAML file alone, then reviewers suggest 
to me do this way so I did, next by split the patches like below...

1. remove the cadence-quadspi.txt (patch1)
2. convert txt to YAML (patch2)

Regards
Vadivel
>