linux-kernel - RE: [PATCH v1 2/2] arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Thu, 21 May 2020 06:05:14 +0000
From:   Robin Gong <yibin.gong@....com>
To:     Peng Fan <peng.fan@....com>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "shawnguo@...nel.org" <shawnguo@...nel.org>,
        "s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
        "festevam@...il.com" <festevam@...il.com>,
        Anson Huang <anson.huang@....com>
CC:     "kernel@...gutronix.de" <kernel@...gutronix.de>,
        dl-linux-imx <linux-imx@....com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v1 2/2] arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2
 voltage range

2020/05/21 14:02 Peng Fan <peng.fan@....com> wrote:
> > Subject: [PATCH v1 2/2] arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2
> > voltage range
> >
> > Correct ldo1 voltage range from wrong high group(3.0v~3.3v) to low
> > group
> > (1.6v~1.9v) because the ldo1 should be 1.8v. Actually, two voltage
> > groups have been supported at bd718x7-regulator driver, hence, just
> > corrrect the voltage range to 1.6v~3.3v. For ldo2@...v, correct voltage range
> too.
> > Otherwise, ldo1 would be kept @3.0v and ldo2@...v which violate
> > i.mx8mm datasheet as the below warning log in kernel:
> >
> > [    0.995524] LDO1: Bringing 1800000uV into 3000000-3000000uV
> > [    0.999196] LDO2: Bringing 800000uV into 900000-900000uV
> >
> > Signed-off-by: Robin Gong <yibin.gong@....com>
> > ---
> >  arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts | 4 ++--
> >  arch/arm64/boot/dts/freescale/imx8mn-evk.dts      | 9 +++++++++
> >  2 files changed, 11 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
> > b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
> > index d07e0e6..a1e5483 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
> > @@ -113,7 +113,7 @@
> >
> >  			ldo1_reg: LDO1 {
> >  				regulator-name = "LDO1";
> > -				regulator-min-microvolt = <3000000>;
> > +				regulator-min-microvolt = <1600000>;
> >  				regulator-max-microvolt = <3300000>;
> >  				regulator-boot-on;
> >  				regulator-always-on;
> > @@ -121,7 +121,7 @@
> >
> >  			ldo2_reg: LDO2 {
> >  				regulator-name = "LDO2";
> > -				regulator-min-microvolt = <900000>;
> > +				regulator-min-microvolt = <800000>;
> >  				regulator-max-microvolt = <900000>;
> >  				regulator-boot-on;
> >  				regulator-always-on;
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
> > b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
> > index 61f3519..117ff4b 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
> > @@ -13,6 +13,15 @@
> >  	compatible = "fsl,imx8mn-evk", "fsl,imx8mn";  };
> >
> > +&ecspi1 {
> > +	status = "okay";
> > +spidev0: spi@0 {
> > +	compatible = "ge,achc";
> > +	reg = <0>;
> > +	spi-max-frequency = <1000000>;
> > +	};
> > +};
> > +
> 
> This was added by mistake?
Sorry, will send out v2.