| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1590053581-803-1-git-send-email-pthombar@cadence.com>
Date: Thu, 21 May 2020 11:33:01 +0200
From: Parshuram Thombare <pthombar@...ence.com>
To: <bbrezillon@...nel.org>, <vitor.soares@...opsys.com>
CC: <pgaj@...ence.com>, <linux-i3c@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <mparab@...ence.com>,
<praneeth@...com>, Parshuram Thombare <pthombar@...ence.com>
Subject: [PATCH v2 2/2] i3c: master: fix for SETDASA and DAA process
This patch fix following issue.
Controller slots blocked for devices with static_addr
but no init_dyn_addr may limit the number of I3C devices
on the bus which gets dynamic address in DAA. So
instead of attaching all the devices with static_addr,
now we only attach the devices which successfully
complete SETDASA. For remaining devices with init_dyn_addr,
i3c_master_add_i3c_dev_locked() will try to set requested
dynamic address after DAA.
Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
Signed-off-by: Parshuram Thombare <pthombar@...ence.com>
---
drivers/i3c/master.c | 119 ++++++++++++++++++++++++++-----------------
1 file changed, 71 insertions(+), 48 deletions(-)
diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 3d995f247cb7..5e0438ecf95c 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -1426,33 +1426,57 @@ static void i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev)
master->ops->detach_i2c_dev(dev);
}
-static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
+static int i3c_master_pre_assign_dyn_addr(struct i3c_master_controller *master,
+ struct i3c_dev_boardinfo *boardinfo)
{
- struct i3c_master_controller *master = i3c_dev_get_master(dev);
+ struct i3c_device_info info = {
+ .static_addr = boardinfo->static_addr,
+ };
+ struct i3c_dev_desc *i3cdev;
int ret;
- if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr ||
- !dev->boardinfo->static_addr)
- return;
+ /*
+ * We anyway don't attach devices which are not addressable
+ * (no static_addr and dyn_addr) and devices with static_addr
+ * but no init_dyn_addr will participate in DAA.
+ */
+ if (!boardinfo->static_addr || !boardinfo->init_dyn_addr)
+ return -EINVAL;
- ret = i3c_master_setdasa_locked(master, dev->info.static_addr,
- dev->boardinfo->init_dyn_addr);
+ i3cdev = i3c_master_alloc_i3c_dev(master, &info);
+ if (IS_ERR(i3cdev))
+ return -ENOMEM;
+
+ i3cdev->boardinfo = boardinfo;
+
+ ret = i3c_master_attach_i3c_dev(master, i3cdev);
if (ret)
- return;
+ goto err_attach;
- dev->info.dyn_addr = dev->boardinfo->init_dyn_addr;
- ret = i3c_master_reattach_i3c_dev(dev, 0);
+ ret = i3c_master_setdasa_locked(master, i3cdev->info.static_addr,
+ i3cdev->boardinfo->init_dyn_addr);
+ if (ret)
+ goto err_setdasa;
+
+ i3cdev->info.dyn_addr = i3cdev->boardinfo->init_dyn_addr;
+ ret = i3c_master_reattach_i3c_dev(i3cdev, 0);
if (ret)
goto err_rstdaa;
- ret = i3c_master_retrieve_dev_info(dev);
+ ret = i3c_master_retrieve_dev_info(i3cdev);
if (ret)
goto err_rstdaa;
- return;
+ return 0;
err_rstdaa:
- i3c_master_rstdaa_locked(master, dev->boardinfo->init_dyn_addr);
+ i3c_master_rstdaa_locked(master, i3cdev->boardinfo->init_dyn_addr);
+err_setdasa:
+ i3c_master_detach_i3c_dev(i3cdev);
+err_attach:
+ i3c_master_free_i3c_dev(i3cdev);
+
+ return ret;
}
static void
@@ -1619,8 +1643,8 @@ static void i3c_master_detach_free_devs(struct i3c_master_controller *master)
* This function is following all initialisation steps described in the I3C
* specification:
*
- * 1. Attach I2C and statically defined I3C devs to the master so that the
- * master can fill its internal device table appropriately
+ * 1. Attach I2C devs to the master so that the master can fill its internal
+ * device table appropriately
*
* 2. Call &i3c_master_controller_ops->bus_init() method to initialize
* the master controller. That's usually where the bus mode is selected
@@ -1633,7 +1657,8 @@ static void i3c_master_detach_free_devs(struct i3c_master_controller *master)
* 4. Disable all slave events.
*
* 5. Pre-assign dynamic addresses requested by the FW with SETDASA for I3C
- * devices that have a static address
+ * devices that have a static address and attach corresponding statically
+ * defined I3C devices to the master.
*
* 6. Do a DAA (Dynamic Address Assignment) to assign dynamic addresses to all
* remaining I3C devices
@@ -1647,7 +1672,6 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
enum i3c_addr_slot_status status;
struct i2c_dev_boardinfo *i2cboardinfo;
struct i3c_dev_boardinfo *i3cboardinfo;
- struct i3c_dev_desc *i3cdev;
struct i2c_dev_desc *i2cdev;
int ret;
@@ -1679,34 +1703,6 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
goto err_detach_devs;
}
}
- list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) {
- struct i3c_device_info info = {
- .static_addr = i3cboardinfo->static_addr,
- };
-
- if (i3cboardinfo->init_dyn_addr) {
- status = i3c_bus_get_addr_slot_status(&master->bus,
- i3cboardinfo->init_dyn_addr);
- if (status != I3C_ADDR_SLOT_FREE) {
- ret = -EBUSY;
- goto err_detach_devs;
- }
- }
-
- i3cdev = i3c_master_alloc_i3c_dev(master, &info);
- if (IS_ERR(i3cdev)) {
- ret = PTR_ERR(i3cdev);
- goto err_detach_devs;
- }
-
- i3cdev->boardinfo = i3cboardinfo;
-
- ret = i3c_master_attach_i3c_dev(master, i3cdev);
- if (ret) {
- i3c_master_free_i3c_dev(i3cdev);
- goto err_detach_devs;
- }
- }
/*
* Now execute the controller specific ->bus_init() routine, which
@@ -1744,10 +1740,26 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
/*
* Pre-assign dynamic address and retrieve device information if
- * needed.
+ * needed. And reserve the init_dyn_addr in case of failure, to retry
+ * setting the requested address after DAA is done in
+ * i3c_master_add_i3c_dev_locked().
*/
- i3c_bus_for_each_i3cdev(&master->bus, i3cdev)
- i3c_master_pre_assign_dyn_addr(i3cdev);
+ list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) {
+ ret = i3c_master_pre_assign_dyn_addr(master, i3cboardinfo);
+ if (!ret || !i3cboardinfo->init_dyn_addr)
+ continue;
+
+ ret = i3c_bus_get_addr_slot_status(&master->bus,
+ i3cboardinfo->init_dyn_addr);
+ if (ret != I3C_ADDR_SLOT_FREE) {
+ ret = -EBUSY;
+ goto err_rstdaa;
+ }
+
+ i3c_bus_set_addr_slot_status(&master->bus,
+ i3cboardinfo->init_dyn_addr,
+ I3C_ADDR_SLOT_I3C_DEV);
+ }
ret = i3c_master_do_daa(master);
if (ret)
@@ -1780,6 +1792,7 @@ static void i3c_master_attach_boardinfo(struct i3c_dev_desc *i3cdev)
{
struct i3c_master_controller *master = i3cdev->common.master;
struct i3c_dev_boardinfo *i3cboardinfo;
+ u8 init_dyn_addr;
list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) {
if (i3cdev->info.pid != i3cboardinfo->pid)
@@ -1787,6 +1800,16 @@ static void i3c_master_attach_boardinfo(struct i3c_dev_desc *i3cdev)
i3cdev->boardinfo = i3cboardinfo;
i3cdev->info.static_addr = i3cboardinfo->static_addr;
+ init_dyn_addr = i3cboardinfo->init_dyn_addr;
+ /*
+ * Free reserved init_dyn_addr so that attach can
+ * get it before trying setnewda.
+ */
+ if (i3cboardinfo->init_dyn_addr)
+ i3c_bus_set_addr_slot_status(&master->bus,
+ init_dyn_addr,
+ I3C_ADDR_SLOT_FREE);
+
return;
}
}
--
2.17.1
Powered by blists - more mailing lists