| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <64adcf54-1fab-2228-4a16-463cdb5e9e36@gmail.com>
Date: Thu, 21 May 2020 14:38:46 +0200
From: Matthias Brugger <matthias.bgg@...il.com>
To: Bibby Hsieh <bibby.hsieh@...iatek.com>
Cc: David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel.vetter@...ll.ch>,
dri-devel@...ts.freedesktop.org,
linux-mediatek@...ts.infradead.org,
Philipp Zabel <p.zabel@...gutronix.de>,
YT Shen <yt.shen@...iatek.com>,
Thierry Reding <thierry.reding@...il.com>,
CK Hu <ck.hu@...iatek.com>,
linux-arm-kernel@...ts.infradead.org, tfiga@...omium.org,
drinkcat@...omium.org, linux-kernel@...r.kernel.org,
srv_heupstream@...iatek.com,
Yongqiang Niu <yongqiang.niu@...iatek.com>
Subject: Re: [PATCH 1/3] arm64: dts: mt8183: Add gce setting in display node
On 21/05/2020 12:47, Bibby Hsieh wrote:
> On Thu, 2020-05-21 at 12:10 +0200, Matthias Brugger wrote:
>> On 14/02/2020 11:06, Matthias Brugger wrote:
>>>
>>>
>>> On 14/02/2020 05:49, Bibby Hsieh wrote:
>>>> In order to use GCE function, we need add some information
>>>> into display node (mboxes, mediatek,gce-client-reg, mediatek,gce-events).
>>>>
>>>> Signed-off-by: Bibby Hsieh <bibby.hsieh@...iatek.com>
>>>> Signed-off-by: Yongqiang Niu <yongqiang.niu@...iatek.com>
>>>> ---
>>>
>>> For the next time please provide some context on which patches this are based
>>> on. Bet below the '---' with a link.
>>>
>>> For this time, on which patch/series is this based? :)
>>
>> Bibby can you please help and rebase the patch against my for-next branch [1].
>> I'm then happy to queue it. Not sure if we can make it for v5.8 as we are really
>> late, but we could try :)
>
> Hi, Matthias,
>
> NP, but this patch[1] is depends on another patch [2].
> Should I rebase them together into your for-next branch?
>
I see and [2] one depends on the scpsys driver.
Then maybe better wait until we have the scpsys driver accepted.
Regards,
Matthias
> [1] https://patchwork.kernel.org/patch/11385863/
> [2] https://patchwork.kernel.org/patch/11316277/
>
> Bibby
>
>>
>> Thanks!
>> Matthias
>>
>> [1]
>> https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux.git/log/?h=for-next
>>
>>>
>>> Thanks,
>>> Matthias
>>>
>>>> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 16 ++++++++++++++++
>>>> 1 file changed, 16 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>>>> index be4428c92f35..8b522b039a37 100644
>>>> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>>>> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>>>> @@ -9,6 +9,7 @@
>>>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>>>> #include <dt-bindings/interrupt-controller/irq.h>
>>>> #include <dt-bindings/power/mt8183-power.h>
>>>> +#include <dt-bindings/gce/mt8183-gce.h>
>>>> #include "mt8183-pinfunc.h"
>>>>
>>>> / {
>>>> @@ -664,6 +665,9 @@
>>>> reg = <0 0x14000000 0 0x1000>;
>>>> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>> #clock-cells = <1>;
>>>> + mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
>>>> + <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
>>>> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
>>>> };
>>>>
>>>> ovl0: ovl@...08000 {
>>>> @@ -672,6 +676,7 @@
>>>> interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
>>>> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>> clocks = <&mmsys CLK_MM_DISP_OVL0>;
>>>> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
>>>> };
>>>>
>>>> ovl_2l0: ovl@...09000 {
>>>> @@ -680,6 +685,7 @@
>>>> interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
>>>> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>> clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
>>>> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
>>>> };
>>>>
>>>> ovl_2l1: ovl@...0a000 {
>>>> @@ -688,6 +694,7 @@
>>>> interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_LOW>;
>>>> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>> clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
>>>> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
>>>> };
>>>>
>>>> rdma0: rdma@...0b000 {
>>>> @@ -697,6 +704,7 @@
>>>> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>> clocks = <&mmsys CLK_MM_DISP_RDMA0>;
>>>> mediatek,rdma_fifo_size = <5120>;
>>>> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
>>>> };
>>>>
>>>> rdma1: rdma@...0c000 {
>>>> @@ -706,6 +714,7 @@
>>>> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>> clocks = <&mmsys CLK_MM_DISP_RDMA1>;
>>>> mediatek,rdma_fifo_size = <2048>;
>>>> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
>>>> };
>>>>
>>>> color0: color@...0e000 {
>>>> @@ -715,6 +724,7 @@
>>>> interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_LOW>;
>>>> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>> clocks = <&mmsys CLK_MM_DISP_COLOR0>;
>>>> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
>>>> };
>>>>
>>>> ccorr0: ccorr@...0f000 {
>>>> @@ -723,6 +733,7 @@
>>>> interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
>>>> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>> clocks = <&mmsys CLK_MM_DISP_CCORR0>;
>>>> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
>>>> };
>>>>
>>>> aal0: aal@...10000 {
>>>> @@ -732,6 +743,7 @@
>>>> interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
>>>> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>> clocks = <&mmsys CLK_MM_DISP_AAL0>;
>>>> + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
>>>> };
>>>>
>>>> gamma0: gamma@...11000 {
>>>> @@ -741,6 +753,7 @@
>>>> interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
>>>> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>> clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
>>>> + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
>>>> };
>>>>
>>>> dither0: dither@...12000 {
>>>> @@ -749,6 +762,7 @@
>>>> interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
>>>> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>> clocks = <&mmsys CLK_MM_DISP_DITHER0>;
>>>> + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
>>>> };
>>>>
>>>> mutex: mutex@...16000 {
>>>> @@ -756,6 +770,8 @@
>>>> reg = <0 0x14016000 0 0x1000>;
>>>> interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>;
>>>> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
>>>> + mediatek,gce-events = <CMDQ_EVENT_MUTEX_STREAM_DONE0>,
>>>> + <CMDQ_EVENT_MUTEX_STREAM_DONE1>;
>>>> };
>>>>
>>>> smi_common: smi@...19000 {
>>>>
>>
>
Powered by blists - more mailing lists