lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Thu, 21 May 2020 19:14:29 +0100
From:   Jonathan Cameron <jic23@...nel.org>
To:     Ivan Mikhaylov <i.mikhaylov@...ro.com>
Cc:     Hartmut Knaack <knaack.h@....de>,
        Lars-Peter Clausen <lars@...afoo.de>,
        Peter Meerwald-Stadler <pmeerw@...erw.net>,
        <linux-iio@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>, Mark Rutland <mark.rutland@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Andy Shevchenko <andy.shevchenko@...il.com>
Subject: Re: [PATCH v14 2/2] iio: proximity: Add driver support for vcnl3020
 proximity sensor

On Sun, 10 May 2020 21:45:37 +0300
Ivan Mikhaylov <i.mikhaylov@...ro.com> wrote:

> Proximity sensor driver based on light/vcnl4000.c code.
> For now supports only the single on-demand measurement.
> 
> The VCNL3020 is a fully integrated proximity sensor. Fully
> integrated means that the infrared emitter is included in the
> package. It has 16-bit resolution. It includes a signal
> processing IC and features standard I2C communication
> interface. It features an interrupt function.
> 
> Datasheet: http://www.vishay.com/docs/84150/vcnl3020.pdf
> Signed-off-by: Ivan Mikhaylov <i.mikhaylov@...ro.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>

Applied to the togreg branch of iio.git and pushed out as testing
or the autobuilders to play with it.

I 'might' manage to sneak a last pull request to Greg tomorrow
so this might make the coming merge window though we are cutting
it close so may go either way.

Thanks,

Jonathan

> ---
>  drivers/iio/proximity/Kconfig    |  11 ++
>  drivers/iio/proximity/Makefile   |   1 +
>  drivers/iio/proximity/vcnl3020.c | 258 +++++++++++++++++++++++++++++++
>  3 files changed, 270 insertions(+)
>  create mode 100644 drivers/iio/proximity/vcnl3020.c
> 
> diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
> index d53601447da4..b8d2b17e60ac 100644
> --- a/drivers/iio/proximity/Kconfig
> +++ b/drivers/iio/proximity/Kconfig
> @@ -112,6 +112,17 @@ config SRF08
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called srf08.
>  
> +config VCNL3020
> +	tristate "VCNL3020 proximity sensor"
> +	select REGMAP_I2C
> +	depends on I2C
> +	help
> +	  Say Y here if you want to build a driver for the Vishay VCNL3020
> +	  proximity sensor.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called vcnl3020.
> +
>  config VL53L0X_I2C
>  	tristate "STMicroelectronics VL53L0X ToF ranger sensor (I2C)"
>  	depends on I2C
> diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile
> index 0bb5f9de13d6..8245978ced30 100644
> --- a/drivers/iio/proximity/Makefile
> +++ b/drivers/iio/proximity/Makefile
> @@ -12,5 +12,6 @@ obj-$(CONFIG_RFD77402)		+= rfd77402.o
>  obj-$(CONFIG_SRF04)		+= srf04.o
>  obj-$(CONFIG_SRF08)		+= srf08.o
>  obj-$(CONFIG_SX9500)		+= sx9500.o
> +obj-$(CONFIG_VCNL3020)		+= vcnl3020.o
>  obj-$(CONFIG_VL53L0X_I2C)	+= vl53l0x-i2c.o
>  
> diff --git a/drivers/iio/proximity/vcnl3020.c b/drivers/iio/proximity/vcnl3020.c
> new file mode 100644
> index 000000000000..9ff1a164c2e6
> --- /dev/null
> +++ b/drivers/iio/proximity/vcnl3020.c
> @@ -0,0 +1,258 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Support for Vishay VCNL3020 proximity sensor on i2c bus.
> + * Based on Vishay VCNL4000 driver code.
> + *
> + * TODO: interrupts.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/err.h>
> +#include <linux/delay.h>
> +#include <linux/regmap.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +
> +#define VCNL3020_PROD_ID	0x21
> +
> +#define VCNL_COMMAND		0x80 /* Command register */
> +#define VCNL_PROD_REV		0x81 /* Product ID and Revision ID */
> +#define VCNL_PROXIMITY_RATE	0x82 /* Rate of Proximity Measurement */
> +#define VCNL_LED_CURRENT	0x83 /* IR LED current for proximity mode */
> +#define VCNL_PS_RESULT_HI	0x87 /* Proximity result register, MSB */
> +#define VCNL_PS_RESULT_LO	0x88 /* Proximity result register, LSB */
> +#define VCNL_PS_ICR		0x89 /* Interrupt Control Register */
> +#define VCNL_PS_LO_THR_HI	0x8a /* High byte of low threshold value */
> +#define VCNL_PS_LO_THR_LO	0x8b /* Low byte of low threshold value */
> +#define VCNL_PS_HI_THR_HI	0x8c /* High byte of high threshold value */
> +#define VCNL_PS_HI_THR_LO	0x8d /* Low byte of high threshold value */
> +#define VCNL_ISR		0x8e /* Interrupt Status Register */
> +#define VCNL_PS_MOD_ADJ		0x8f /* Proximity Modulator Timing Adjustment */
> +
> +/* Bit masks for COMMAND register */
> +#define VCNL_PS_RDY		BIT(5) /* proximity data ready? */
> +#define VCNL_PS_OD		BIT(3) /* start on-demand proximity
> +					* measurement
> +					*/
> +
> +#define VCNL_ON_DEMAND_TIMEOUT_US	100000
> +#define VCNL_POLL_US			20000
> +
> +/**
> + * struct vcnl3020_data - vcnl3020 specific data.
> + * @regmap:	device register map.
> + * @dev:	vcnl3020 device.
> + * @rev:	revision id.
> + * @lock:	lock for protecting access to device hardware registers.
> + */
> +struct vcnl3020_data {
> +	struct regmap *regmap;
> +	struct device *dev;
> +	u8 rev;
> +	struct mutex lock;
> +};
> +
> +/**
> + * struct vcnl3020_property - vcnl3020 property.
> + * @name:	property name.
> + * @reg:	i2c register offset.
> + * @conversion_func:	conversion function.
> + */
> +struct vcnl3020_property {
> +	const char *name;
> +	u32 reg;
> +	u32 (*conversion_func)(u32 *val);
> +};
> +
> +static u32 microamp_to_reg(u32 *val)
> +{
> +	/*
> +	 * An example of conversion from uA to reg val:
> +	 * 200000 uA == 200 mA == 20
> +	 */
> +	return *val /= 10000;
> +};
> +
> +static struct vcnl3020_property vcnl3020_led_current_property = {
> +	.name = "vishay,led-current-microamp",
> +	.reg = VCNL_LED_CURRENT,
> +	.conversion_func = microamp_to_reg,
> +};
> +
> +static int vcnl3020_get_and_apply_property(struct vcnl3020_data *data,
> +					   struct vcnl3020_property prop)
> +{
> +	int rc;
> +	u32 val;
> +
> +	rc = device_property_read_u32(data->dev, prop.name, &val);
> +	if (rc)
> +		return 0;
> +
> +	if (prop.conversion_func)
> +		prop.conversion_func(&val);
> +
> +	rc = regmap_write(data->regmap, prop.reg, val);
> +	if (rc) {
> +		dev_err(data->dev, "Error (%d) setting property (%s)\n",
> +			rc, prop.name);
> +	}
> +
> +	return rc;
> +}
> +
> +static int vcnl3020_init(struct vcnl3020_data *data)
> +{
> +	int rc;
> +	unsigned int reg;
> +
> +	rc = regmap_read(data->regmap, VCNL_PROD_REV, &reg);
> +	if (rc) {
> +		dev_err(data->dev,
> +			"Error (%d) reading product revision\n", rc);
> +		return rc;
> +	}
> +
> +	if (reg != VCNL3020_PROD_ID) {
> +		dev_err(data->dev,
> +			"Product id (%x) did not match vcnl3020 (%x)\n", reg,
> +			VCNL3020_PROD_ID);
> +		return -ENODEV;
> +	}
> +
> +	data->rev = reg;
> +	mutex_init(&data->lock);
> +
> +	return vcnl3020_get_and_apply_property(data,
> +					       vcnl3020_led_current_property);
> +};
> +
> +static int vcnl3020_measure_proximity(struct vcnl3020_data *data, int *val)
> +{
> +	int rc;
> +	unsigned int reg;
> +	__be16 res;
> +
> +	mutex_lock(&data->lock);
> +
> +	rc = regmap_write(data->regmap, VCNL_COMMAND, VCNL_PS_OD);
> +	if (rc)
> +		goto err_unlock;
> +
> +	/* wait for data to become ready */
> +	rc = regmap_read_poll_timeout(data->regmap, VCNL_COMMAND, reg,
> +				      reg & VCNL_PS_RDY, VCNL_POLL_US,
> +				      VCNL_ON_DEMAND_TIMEOUT_US);
> +	if (rc) {
> +		dev_err(data->dev,
> +			"Error (%d) reading vcnl3020 command register\n", rc);
> +		goto err_unlock;
> +	}
> +
> +	/* high & low result bytes read */
> +	rc = regmap_bulk_read(data->regmap, VCNL_PS_RESULT_HI, &res,
> +			      sizeof(res));
> +	if (rc)
> +		goto err_unlock;
> +
> +	*val = be16_to_cpu(res);
> +
> +err_unlock:
> +	mutex_unlock(&data->lock);
> +
> +	return rc;
> +}
> +
> +static const struct iio_chan_spec vcnl3020_channels[] = {
> +	{
> +		.type = IIO_PROXIMITY,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> +	},
> +};
> +
> +static int vcnl3020_read_raw(struct iio_dev *indio_dev,
> +			     struct iio_chan_spec const *chan, int *val,
> +			     int *val2, long mask)
> +{
> +	int rc;
> +	struct vcnl3020_data *data = iio_priv(indio_dev);
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		rc = vcnl3020_measure_proximity(data, val);
> +		if (rc)
> +			return rc;
> +		return IIO_VAL_INT;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static const struct iio_info vcnl3020_info = {
> +	.read_raw = vcnl3020_read_raw,
> +};
> +
> +static const struct regmap_config vcnl3020_regmap_config = {
> +	.reg_bits	= 8,
> +	.val_bits	= 8,
> +	.max_register	= VCNL_PS_MOD_ADJ,
> +};
> +
> +static int vcnl3020_probe(struct i2c_client *client)
> +{
> +	struct vcnl3020_data *data;
> +	struct iio_dev *indio_dev;
> +	struct regmap *regmap;
> +	int rc;
> +
> +	regmap = devm_regmap_init_i2c(client, &vcnl3020_regmap_config);
> +	if (IS_ERR(regmap)) {
> +		dev_err(&client->dev, "regmap_init failed\n");
> +		return PTR_ERR(regmap);
> +	}
> +
> +	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	data = iio_priv(indio_dev);
> +	i2c_set_clientdata(client, indio_dev);
> +	data->regmap = regmap;
> +	data->dev = &client->dev;
> +
> +	rc = vcnl3020_init(data);
> +	if (rc)
> +		return rc;
> +
> +	indio_dev->dev.parent = &client->dev;
> +	indio_dev->info = &vcnl3020_info;
> +	indio_dev->channels = vcnl3020_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(vcnl3020_channels);
> +	indio_dev->name = "vcnl3020";
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +
> +	return devm_iio_device_register(&client->dev, indio_dev);
> +}
> +
> +static const struct of_device_id vcnl3020_of_match[] = {
> +	{
> +		.compatible = "vishay,vcnl3020",
> +	},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, vcnl3020_of_match);
> +
> +static struct i2c_driver vcnl3020_driver = {
> +	.driver = {
> +		.name   = "vcnl3020",
> +		.of_match_table = vcnl3020_of_match,
> +	},
> +	.probe_new  = vcnl3020_probe,
> +};
> +module_i2c_driver(vcnl3020_driver);
> +
> +MODULE_AUTHOR("Ivan Mikhaylov <i.mikhaylov@...ro.com>");
> +MODULE_DESCRIPTION("Vishay VCNL3020 proximity sensor driver");
> +MODULE_LICENSE("GPL");

Powered by blists - more mailing lists