Message-ID: <20200522062946.28973-6-andraprs@amazon.com>
Date:   Fri, 22 May 2020 09:29:33 +0300
From:   Andra Paraschiv <andraprs@...zon.com>
To:     <linux-kernel@...r.kernel.org>
CC:     Anthony Liguori <aliguori@...zon.com>,
        Benjamin Herrenschmidt <benh@...nel.crashing.org>,
        Colm MacCarthaigh <colmmacc@...zon.com>,
        "Bjoern Doebel" <doebel@...zon.de>,
        David Woodhouse <dwmw@...zon.co.uk>,
        "Frank van der Linden" <fllinden@...zon.com>,
        Alexander Graf <graf@...zon.de>,
        "Martin Pohlack" <mpohlack@...zon.de>,
        Matt Wilson <msw@...zon.com>,
        Paolo Bonzini <pbonzini@...hat.com>,
        Balbir Singh <sblbir@...zon.com>,
        Stefano Garzarella <sgarzare@...hat.com>,
        Stefan Hajnoczi <stefanha@...hat.com>,
        Stewart Smith <trawets@...zon.com>,
        Uwe Dannowski <uwed@...zon.de>, <kvm@...r.kernel.org>,
        <ne-devel-upstream@...zon.com>,
        Andra Paraschiv <andraprs@...zon.com>,
        kbuild test robot <lkp@...el.com>
Subject: [PATCH v2 05/18] nitro_enclaves: Handle PCI device command requests

The Nitro Enclaves PCI device exposes a MMIO space that this driver
uses to submit command requests and to receive command replies e.g. for
enclave creation / termination or setting enclave resources.

Add logic for handling PCI device command requests based on the given
command type.

Register an MSI-X interrupt vector for command reply notifications to
handle this type of communication events.

Signed-off-by: Alexandru-Catalin Vasile <lexnv@...zon.com>
Signed-off-by: Andra Paraschiv <andraprs@...zon.com>

Fix issue reported in:
https://lore.kernel.org/lkml/202004231644.xTmN4Z1z%25lkp@intel.com/

Reported-by: kbuild test robot <lkp@...el.com>
Signed-off-by: Andra Paraschiv <andraprs@...zon.com>
---
 drivers/virt/nitro_enclaves/ne_pci_dev.c | 284 +++++++++++++++++++++++
 1 file changed, 284 insertions(+)

diff --git a/drivers/virt/nitro_enclaves/ne_pci_dev.c b/drivers/virt/nitro_enclaves/ne_pci_dev.c
index 8e39e30c882f..7b2d8e1b49a5 100644
--- a/drivers/virt/nitro_enclaves/ne_pci_dev.c
+++ b/drivers/virt/nitro_enclaves/ne_pci_dev.c
@@ -42,6 +42,268 @@ static const struct pci_device_id ne_pci_ids[] = {
 
 MODULE_DEVICE_TABLE(pci, ne_pci_ids);
 
+/**
+ * ne_submit_request - Submit command request to the PCI device based on the
+ * command type.
+ *
+ * This function gets called with the ne_pci_dev mutex held.
+ *
+ * @pdev: PCI device to send the command to.
+ * @cmd_type: command type of the request sent to the PCI device.
+ * @cmd_request: command request payload.
+ * @cmd_request_size: size of the command request payload.
+ *
+ * @returns: 0 on success, negative return value on failure.
+ */
+static int ne_submit_request(struct pci_dev *pdev,
+			     enum ne_pci_dev_cmd_type cmd_type,
+			     void *cmd_request, size_t cmd_request_size)
+{
+	struct ne_pci_dev *ne_pci_dev = NULL;
+
+	if (WARN_ON(!pdev))
+		return -EINVAL;
+
+	ne_pci_dev = pci_get_drvdata(pdev);
+	if (WARN_ON(!ne_pci_dev) || WARN_ON(!ne_pci_dev->iomem_base))
+		return -EINVAL;
+
+	if (cmd_type <= INVALID_CMD || cmd_type >= MAX_CMD) {
+		dev_err_ratelimited(&pdev->dev, NE "Invalid cmd type=%u\n",
+				    cmd_type);
+
+		return -EINVAL;
+	}
+
+	if (!cmd_request) {
+		dev_err_ratelimited(&pdev->dev, NE "Null cmd request\n");
+
+		return -EINVAL;
+	}
+
+	if (cmd_request_size > NE_SEND_DATA_SIZE) {
+		dev_err_ratelimited(&pdev->dev,
+				    NE "Invalid req size=%zu for cmd type=%u\n",
+				    cmd_request_size, cmd_type);
+
+		return -EINVAL;
+	}
+
+	memcpy_toio(ne_pci_dev->iomem_base + NE_SEND_DATA, cmd_request,
+		    cmd_request_size);
+
+	iowrite32(cmd_type, ne_pci_dev->iomem_base + NE_COMMAND);
+
+	return 0;
+}
+
+/**
+ * ne_retrieve_reply - Retrieve reply from the PCI device.
+ *
+ * This function gets called with the ne_pci_dev mutex held.
+ *
+ * @pdev: PCI device to receive the reply from.
+ * @cmd_reply: command reply payload.
+ * @cmd_reply_size: size of the command reply payload.
+ *
+ * @returns: 0 on success, negative return value on failure.
+ */
+static int ne_retrieve_reply(struct pci_dev *pdev,
+			     struct ne_pci_dev_cmd_reply *cmd_reply,
+			     size_t cmd_reply_size)
+{
+	struct ne_pci_dev *ne_pci_dev = NULL;
+
+	if (WARN_ON(!pdev))
+		return -EINVAL;
+
+	ne_pci_dev = pci_get_drvdata(pdev);
+	if (WARN_ON(!ne_pci_dev) || WARN_ON(!ne_pci_dev->iomem_base))
+		return -EINVAL;
+
+	if (!cmd_reply) {
+		dev_err_ratelimited(&pdev->dev, NE "Null cmd reply\n");
+
+		return -EINVAL;
+	}
+
+	if (cmd_reply_size > NE_RECV_DATA_SIZE) {
+		dev_err_ratelimited(&pdev->dev, NE "Invalid reply size=%zu\n",
+				    cmd_reply_size);
+
+		return -EINVAL;
+	}
+
+	memcpy_fromio(cmd_reply, ne_pci_dev->iomem_base + NE_RECV_DATA,
+		      cmd_reply_size);
+
+	return 0;
+}
+
+/**
+ * ne_wait_for_reply - Wait for a reply of a PCI command.
+ *
+ * This function gets called with the ne_pci_dev mutex held.
+ *
+ * @pdev: PCI device for which a reply is waited.
+ *
+ * @returns: 0 on success, negative return value on failure.
+ */
+static int ne_wait_for_reply(struct pci_dev *pdev)
+{
+	struct ne_pci_dev *ne_pci_dev = NULL;
+	int rc = -EINVAL;
+
+	if (WARN_ON(!pdev))
+		return -EINVAL;
+
+	ne_pci_dev = pci_get_drvdata(pdev);
+	if (WARN_ON(!ne_pci_dev))
+		return -EINVAL;
+
+	/*
+	 * TODO: Update to _interruptible and handle interrupted wait event
+	 * e.g. -ERESTARTSYS, incoming signals + add / update timeout.
+	 */
+	rc = wait_event_timeout(ne_pci_dev->cmd_reply_wait_q,
+				atomic_read(&ne_pci_dev->cmd_reply_avail) != 0,
+				msecs_to_jiffies(DEFAULT_TIMEOUT_MSECS));
+	if (!rc) {
+		dev_err_ratelimited(&pdev->dev,
+				    NE "Timeout in wait for reply\n");
+
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+int ne_do_request(struct pci_dev *pdev, enum ne_pci_dev_cmd_type cmd_type,
+		  void *cmd_request, size_t cmd_request_size,
+		  struct ne_pci_dev_cmd_reply *cmd_reply, size_t cmd_reply_size)
+{
+	struct ne_pci_dev *ne_pci_dev = NULL;
+	int rc = -EINVAL;
+
+	if (WARN_ON(!pdev))
+		return -EINVAL;
+
+	ne_pci_dev = pci_get_drvdata(pdev);
+	if (WARN_ON(!ne_pci_dev) || WARN_ON(!ne_pci_dev->iomem_base))
+		return -EINVAL;
+
+	if (cmd_type <= INVALID_CMD || cmd_type >= MAX_CMD) {
+		dev_err_ratelimited(&pdev->dev, NE "Invalid cmd type=%u\n",
+				    cmd_type);
+
+		return -EINVAL;
+	}
+
+	if (!cmd_request) {
+		dev_err_ratelimited(&pdev->dev, NE "Null cmd request\n");
+
+		return -EINVAL;
+	}
+
+	if (cmd_request_size > NE_SEND_DATA_SIZE) {
+		dev_err_ratelimited(&pdev->dev,
+				    NE "Invalid req size=%zu for cmd type=%u\n",
+				    cmd_request_size, cmd_type);
+
+		return -EINVAL;
+	}
+
+	if (!cmd_reply) {
+		dev_err_ratelimited(&pdev->dev, NE "Null cmd reply\n");
+
+		return -EINVAL;
+	}
+
+	if (cmd_reply_size > NE_RECV_DATA_SIZE) {
+		dev_err_ratelimited(&pdev->dev, NE "Invalid reply size=%zu\n",
+				    cmd_reply_size);
+
+		return -EINVAL;
+	}
+
+	/*
+	 * Use this mutex so that the PCI device handles one command request at
+	 * a time.
+	 */
+	mutex_lock(&ne_pci_dev->pci_dev_mutex);
+
+	atomic_set(&ne_pci_dev->cmd_reply_avail, 0);
+
+	rc = ne_submit_request(pdev, cmd_type, cmd_request, cmd_request_size);
+	if (rc < 0) {
+		dev_err_ratelimited(&pdev->dev,
+				    NE "Error in submit request [rc=%d]\n",
+				    rc);
+
+		goto unlock_mutex;
+	}
+
+	rc = ne_wait_for_reply(pdev);
+	if (rc < 0) {
+		dev_err_ratelimited(&pdev->dev,
+				    NE "Error in wait for reply [rc=%d]\n",
+				    rc);
+
+		goto unlock_mutex;
+	}
+
+	rc = ne_retrieve_reply(pdev, cmd_reply, cmd_reply_size);
+	if (rc < 0) {
+		dev_err_ratelimited(&pdev->dev,
+				    NE "Error in retrieve reply [rc=%d]\n",
+				    rc);
+
+		goto unlock_mutex;
+	}
+
+	atomic_set(&ne_pci_dev->cmd_reply_avail, 0);
+
+	if (cmd_reply->rc < 0) {
+		dev_err_ratelimited(&pdev->dev,
+				    NE "Error in cmd process logic [rc=%d]\n",
+				    cmd_reply->rc);
+
+		rc = cmd_reply->rc;
+
+		goto unlock_mutex;
+	}
+
+	mutex_unlock(&ne_pci_dev->pci_dev_mutex);
+
+	return 0;
+
+unlock_mutex:
+	mutex_unlock(&ne_pci_dev->pci_dev_mutex);
+
+	return rc;
+}
+
+/**
+ * ne_reply_handler - Interrupt handler for retrieving a reply matching
+ * a request sent to the PCI device for enclave lifetime management.
+ *
+ * @irq: received interrupt for a reply sent by the PCI device.
+ * @args: PCI device private data structure.
+ *
+ * @returns: IRQ_HANDLED on handled interrupt, IRQ_NONE otherwise.
+ */
+static irqreturn_t ne_reply_handler(int irq, void *args)
+{
+	struct ne_pci_dev *ne_pci_dev = (struct ne_pci_dev *)args;
+
+	atomic_set(&ne_pci_dev->cmd_reply_avail, 1);
+
+	/* TODO: Update to _interruptible. */
+	wake_up(&ne_pci_dev->cmd_reply_wait_q);
+
+	return IRQ_HANDLED;
+}
+
 /**
  * ne_setup_msix - Setup MSI-X vectors for the PCI device.
  *
@@ -82,7 +344,27 @@ static int ne_setup_msix(struct pci_dev *pdev)
 		return rc;
 	}
 
+	/*
+	 * This IRQ gets triggered every time the PCI device responds to a
+	 * command request. The reply is then retrieved, reading from the MMIO
+	 * space of the PCI device.
+	 */
+	rc = request_irq(pci_irq_vector(pdev, NE_VEC_REPLY),
+			 ne_reply_handler, 0, "enclave_cmd", ne_pci_dev);
+	if (rc < 0) {
+		dev_err_ratelimited(&pdev->dev,
+				    NE "Error in request irq reply [rc=%d]\n",
+				    rc);
+
+		goto free_irq_vectors;
+	}
+
 	return 0;
+
+free_irq_vectors:
+	pci_free_irq_vectors(pdev);
+
+	return rc;
 }
 
 /**
@@ -101,6 +383,8 @@ static void ne_teardown_msix(struct pci_dev *pdev)
 	if (WARN_ON(!ne_pci_dev))
 		return;
 
+	free_irq(pci_irq_vector(pdev, NE_VEC_REPLY), ne_pci_dev);
+
 	pci_free_irq_vectors(pdev);
 }
 
-- 
2.20.1 (Apple Git-117)




Amazon Development Center (Romania) S.R.L. registered office: 27A Sf. Lazar Street, UBC5, floor 2, Iasi, Iasi County, 700045, Romania. Registered in Romania. Registration number J22/2621/2005.

Powered by blists - more mailing lists