[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAOMZO5AgAYgxb9djwGXdpMme4aREYiGPXVa=x0Hb5vo-KJGrug@mail.gmail.com>
Date: Fri, 22 May 2020 07:24:33 -0300
From: Fabio Estevam <festevam@...il.com>
To: Robin Gong <yibin.gong@....com>
Cc: Rob Herring <robh+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Yongcai Huang <anson.huang@....com>,
Peng Fan <peng.fan@....com>,
Leonard Crestez <leonard.crestez@....com>,
Dong Aisheng <aisheng.dong@....com>,
Sascha Hauer <kernel@...gutronix.de>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
NXP Linux Team <linux-imx@....com>
Subject: Re: [PATCH v3 1/2] arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range
On Thu, May 21, 2020 at 11:44 PM Robin Gong <yibin.gong@....com> wrote:
>
> Correct ldo1 voltage range from wrong high group(3.0V~3.3V) to low group
> (1.6V~1.9V) because the ldo1 should be 1.8V. Actually, two voltage groups
> have been supported at bd718x7-regulator driver, hence, just corrrect the
> voltage range to 1.6V~3.3V. For ldo2@...V, correct voltage range too.
> Otherwise, ldo1 would be kept @3.0V and ldo2@...V which violate i.mx8mm
> datasheet as the below warning log in kernel:
>
> [ 0.995524] LDO1: Bringing 1800000uV into 3000000-3000000uV
> [ 0.999196] LDO2: Bringing 800000uV into 900000-900000uV
>
> Fixes: 78cc25fa265d ("arm64: dts: imx8mm-evk: Add BD71847 PMIC")
> Cc: stable@...r.kernel.org
> Signed-off-by: Robin Gong <yibin.gong@....com>
> Reviewed-by: Dong Aisheng <aisheng.dong@....com>
Reviewed-by: Fabio Estevam <festevam@...il.com>
Powered by blists - more mailing lists