linux-kernel - Re: [RFC 03/11] net: phy: refactor c45 phy identification sequence

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sat, 23 May 2020 12:16:18 -0500
From:   Jeremy Linton <jeremy.linton@....com>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     netdev@...r.kernel.org, davem@...emloft.net, f.fainelli@...il.com,
        hkallweit1@...il.com, linux@...linux.org.uk,
        madalin.bucur@....nxp.com, calvin.johnson@....nxp.com,
        linux-kernel@...r.kernel.org
Subject: Re: [RFC 03/11] net: phy: refactor c45 phy identification sequence

Hi,

Thanks for taking a look at this!

On 5/23/20 10:28 AM, Andrew Lunn wrote:
> On Fri, May 22, 2020 at 04:30:51PM -0500, Jeremy Linton wrote:
>> Lets factor out the phy id logic, and make it generic
>> so that it can be used for c22 and c45.
>>
>> Signed-off-by: Jeremy Linton <jeremy.linton@....com>
>> ---
>>   drivers/net/phy/phy_device.c | 65 +++++++++++++++++++-----------------
>>   1 file changed, 35 insertions(+), 30 deletions(-)
>>
>> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
>> index 7746c07b97fe..f0761fa5e40b 100644
>> --- a/drivers/net/phy/phy_device.c
>> +++ b/drivers/net/phy/phy_device.c
>> @@ -695,6 +695,29 @@ static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr,
>>   	return 0;
>>   }
>>   
>> +static int _get_phy_id(struct mii_bus *bus, int addr, int dev_addr,
>> +		       u32 *phy_id, bool c45)
> 
> Hi Jeremy
> 
> How about read_phy_id() so you can avoid the _ prefix.

Yes, that sounds good.

> 
>>   static bool valid_phy_id(int val)
>>   {
>>   	return (val > 0 && ((val & 0x1fffffff) != 0x1fffffff));
>> @@ -715,17 +738,17 @@ static bool valid_phy_id(int val)
>>    */
>>   static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
>>   			   struct phy_c45_device_ids *c45_ids) {
>> -	int phy_reg;
>> -	int i, reg_addr;
>> +	int ret;
>> +	int i;
>>   	const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
>>   	u32 *devs = &c45_ids->devices_in_package;
>>   
>>   	/* Find first non-zero Devices In package. Device zero is reserved
>>   	 * for 802.3 c45 complied PHYs, so don't probe it at first.
>>   	 */
>> -	for (i = 1; i < num_ids && *devs == 0; i++) {
>> -		phy_reg = get_phy_c45_devs_in_pkg(bus, addr, i, devs);
>> -		if (phy_reg < 0)
>> +	for (i = 0; i < num_ids && *devs == 0; i++) {
>> +		ret = get_phy_c45_devs_in_pkg(bus, addr, i, devs);
>> +		if (ret < 0)
>>   			return -EIO;
> 
> Renaming reg_addr to ret does not belong in this patch.

Sure, that makes sense. The rename was a last min change when I was 
shuffling the args around.

Thanks,