linux-kernel - [PATCH] arm64: dts: qcom: sm8250: change ufs node name to ufshc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200523175232.13721-1-jonathan@marek.ca>
Date:   Sat, 23 May 2020 13:52:32 -0400
From:   Jonathan Marek <jonathan@...ek.ca>
To:     linux-arm-msm@...r.kernel.org
Cc:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH] arm64: dts: qcom: sm8250: change ufs node name to ufshc

The ufs-qcom driver checks that the name matches the androidboot.bootdevice
parameter provided by the bootloader, which uses the name ufshc. Without
this change UFS fails to probe.

I think this is broken behavior from the ufs-qcom driver, but using the
name ufshc is consistent with dts for sdm845/sm8150/etc.

Signed-off-by: Jonathan Marek <jonathan@...ek.ca>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index e0344d3ba159..3bdce658c08a 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -309,7 +309,7 @@ uart2: serial@...000 {
 			};
 		};
 
-		ufs_mem_hc: ufs@...4000 {
+		ufs_mem_hc: ufshc@...4000 {
 			compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
-- 
2.26.1