| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200525113855.178821-1-alexandru.ardelean@analog.com>
Date: Mon, 25 May 2020 14:38:53 +0300
From: Alexandru Ardelean <alexandru.ardelean@...log.com>
To: <linux-iio@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-stm32@...md-mailman.stormreply.com>
CC: <jic23@...nel.org>, <shawnguo@...nel.org>,
<s.hauer@...gutronix.de>, <mcoquelin.stm32@...il.com>,
<alexandre.torgue@...com>, <linus.walleij@...aro.org>,
<lorenzo.bianconi83@...il.com>, <songqiang1304521@...il.com>,
Lars-Peter Clausen <lars@...afoo.de>,
"Alexandru Ardelean" <alexandru.ardelean@...log.com>
Subject: [PATCH v2 1/3] iio: Move attach/detach of the poll func to the core
From: Lars-Peter Clausen <lars@...afoo.de>
All devices using a triggered buffer need to attach and detach the trigger
to the device in order to properly work. Instead of doing this in each and
every driver by hand move this into the core.
At this point in time, all drivers should have been resolved to
attach/detach the poll-function in the same order.
Signed-off-by: Lars-Peter Clausen <lars@...afoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
---
Changelog v1 -> v2:
- drivers/iio/accel/st_accel_buffer.c - remove err2 var and return directly
- drivers/iio/gyro/st_gyro_buffer.c - return earlier if
st_sensors_set_enable() failed
- drivers/iio/light/vcnl4000.c - return directly on error in
vcnl4010_buffer_postenable() & vcnl4010_buffer_predisable()
- drivers/iio/pressure/zpa2326.c - print error message on error paths only
.../buffer/industrialio-triggered-buffer.c | 10 +--------
drivers/iio/iio_core_trigger.h | 17 ++++++++++++++
drivers/iio/industrialio-buffer.c | 13 +++++++++++
drivers/iio/industrialio-trigger.c | 22 ++++---------------
include/linux/iio/trigger_consumer.h | 7 ------
5 files changed, 35 insertions(+), 34 deletions(-)
diff --git a/drivers/iio/buffer/industrialio-triggered-buffer.c b/drivers/iio/buffer/industrialio-triggered-buffer.c
index e8046c1ecd6b..6c20a83f887e 100644
--- a/drivers/iio/buffer/industrialio-triggered-buffer.c
+++ b/drivers/iio/buffer/industrialio-triggered-buffer.c
@@ -13,11 +13,6 @@
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
-static const struct iio_buffer_setup_ops iio_triggered_buffer_setup_ops = {
- .postenable = &iio_triggered_buffer_postenable,
- .predisable = &iio_triggered_buffer_predisable,
-};
-
/**
* iio_triggered_buffer_setup() - Setup triggered buffer and pollfunc
* @indio_dev: IIO device structure
@@ -67,10 +62,7 @@ int iio_triggered_buffer_setup(struct iio_dev *indio_dev,
}
/* Ring buffer functions - here trigger setup related */
- if (setup_ops)
- indio_dev->setup_ops = setup_ops;
- else
- indio_dev->setup_ops = &iio_triggered_buffer_setup_ops;
+ indio_dev->setup_ops = setup_ops;
/* Flag that polled ring buffering is possible */
indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
diff --git a/drivers/iio/iio_core_trigger.h b/drivers/iio/iio_core_trigger.h
index e59fe2f36bbb..9d1a92cc6480 100644
--- a/drivers/iio/iio_core_trigger.h
+++ b/drivers/iio/iio_core_trigger.h
@@ -18,6 +18,12 @@ void iio_device_register_trigger_consumer(struct iio_dev *indio_dev);
**/
void iio_device_unregister_trigger_consumer(struct iio_dev *indio_dev);
+
+int iio_trigger_attach_poll_func(struct iio_trigger *trig,
+ struct iio_poll_func *pf);
+int iio_trigger_detach_poll_func(struct iio_trigger *trig,
+ struct iio_poll_func *pf);
+
#else
/**
@@ -37,4 +43,15 @@ static void iio_device_unregister_trigger_consumer(struct iio_dev *indio_dev)
{
}
+static inline int iio_trigger_attach_poll_func(struct iio_trigger *trig,
+ struct iio_poll_func *pf)
+{
+ return 0;
+}
+static inline int iio_trigger_detach_poll_func(struct iio_trigger *trig,
+ struct iio_poll_func *pf)
+{
+ return 0;
+}
+
#endif /* CONFIG_TRIGGER_CONSUMER */
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index 9fa238c0a7d4..329dd4d6757a 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -20,6 +20,7 @@
#include <linux/iio/iio.h>
#include "iio_core.h"
+#include "iio_core_trigger.h"
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/buffer_impl.h>
@@ -972,6 +973,13 @@ static int iio_enable_buffers(struct iio_dev *indio_dev,
}
}
+ if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
+ ret = iio_trigger_attach_poll_func(indio_dev->trig,
+ indio_dev->pollfunc);
+ if (ret)
+ goto err_disable_buffers;
+ }
+
return 0;
err_disable_buffers:
@@ -998,6 +1006,11 @@ static int iio_disable_buffers(struct iio_dev *indio_dev)
if (list_empty(&indio_dev->buffer_list))
return 0;
+ if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
+ iio_trigger_detach_poll_func(indio_dev->trig,
+ indio_dev->pollfunc);
+ }
+
/*
* If things go wrong at some step in disable we still need to continue
* to perform the other steps, otherwise we leave the device in a
diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
index 53d1931f6be8..6f16357fd732 100644
--- a/drivers/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -239,8 +239,8 @@ static void iio_trigger_put_irq(struct iio_trigger *trig, int irq)
* the relevant function is in there may be the best option.
*/
/* Worth protecting against double additions? */
-static int iio_trigger_attach_poll_func(struct iio_trigger *trig,
- struct iio_poll_func *pf)
+int iio_trigger_attach_poll_func(struct iio_trigger *trig,
+ struct iio_poll_func *pf)
{
int ret = 0;
bool notinuse
@@ -290,8 +290,8 @@ static int iio_trigger_attach_poll_func(struct iio_trigger *trig,
return ret;
}
-static int iio_trigger_detach_poll_func(struct iio_trigger *trig,
- struct iio_poll_func *pf)
+int iio_trigger_detach_poll_func(struct iio_trigger *trig,
+ struct iio_poll_func *pf)
{
int ret = 0;
bool no_other_users
@@ -705,17 +705,3 @@ void iio_device_unregister_trigger_consumer(struct iio_dev *indio_dev)
if (indio_dev->trig)
iio_trigger_put(indio_dev->trig);
}
-
-int iio_triggered_buffer_postenable(struct iio_dev *indio_dev)
-{
- return iio_trigger_attach_poll_func(indio_dev->trig,
- indio_dev->pollfunc);
-}
-EXPORT_SYMBOL(iio_triggered_buffer_postenable);
-
-int iio_triggered_buffer_predisable(struct iio_dev *indio_dev)
-{
- return iio_trigger_detach_poll_func(indio_dev->trig,
- indio_dev->pollfunc);
-}
-EXPORT_SYMBOL(iio_triggered_buffer_predisable);
diff --git a/include/linux/iio/trigger_consumer.h b/include/linux/iio/trigger_consumer.h
index c3c6ba5ec423..3aa2f132dd67 100644
--- a/include/linux/iio/trigger_consumer.h
+++ b/include/linux/iio/trigger_consumer.h
@@ -50,11 +50,4 @@ irqreturn_t iio_pollfunc_store_time(int irq, void *p);
void iio_trigger_notify_done(struct iio_trigger *trig);
-/*
- * Two functions for common case where all that happens is a pollfunc
- * is attached and detached from a trigger
- */
-int iio_triggered_buffer_postenable(struct iio_dev *indio_dev);
-int iio_triggered_buffer_predisable(struct iio_dev *indio_dev);
-
#endif
--
2.25.1
Powered by blists - more mailing lists