| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200525225918.1624470-3-nivedita@alum.mit.edu>
Date: Mon, 25 May 2020 18:59:16 -0400
From: Arvind Sankar <nivedita@...m.mit.edu>
To: Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>, Borislav Petkov <bp@...en8.de>,
"H. Peter Anvin" <hpa@...or.com>, x86@...nel.org
Cc: Nick Desaulniers <ndesaulniers@...gle.com>,
Fangrui Song <maskray@...gle.com>,
Dmitry Golovin <dima@...ovin.in>,
clang-built-linux@...glegroups.com,
Ard Biesheuvel <ardb@...nel.org>,
Masahiro Yamada <masahiroy@...nel.org>,
Daniel Kiper <daniel.kiper@...cle.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/4] x86/boot: Remove run-time relocations from .head.text code
The assembly code in head_{32,64}.S, while meant to be
position-independent, generates run-time relocations because it uses
instructions such as
leal gdt(%edx), %eax
which make the assembler and linker think that the code is using %edx as
an index into gdt, and hence gdt needs to be relocated to its run-time
address.
On 32-bit, with lld Dmitry Golovin reports that this results in a
link-time error with default options (i.e. unless -z notext is
explicitly passed):
LD arch/x86/boot/compressed/vmlinux
ld.lld: error: can't create dynamic relocation R_386_32 against local
symbol in readonly segment; recompile object files with -fPIC or pass
'-Wl,-z,notext' to allow text relocations in the output
With the BFD linker, this generates a warning during the build, if
--warn-shared-textrel is enabled, which at least Gentoo enables by
default:
LD arch/x86/boot/compressed/vmlinux
ld: arch/x86/boot/compressed/head_32.o: warning: relocation in read-only section `.head.text'
ld: warning: creating a DT_TEXTREL in object
On 64-bit, it is not possible to link the kernel as -pie with lld, and
it is only possible with a BFD linker that supports -z noreloc-overflow,
i.e. versions >2.26. This is because these instructions cannot really be
relocated: the displacement field is only 32-bits wide, and thus cannot
be relocated for a 64-bit load address. The -z noreloc-overflow option
simply overrides the linker error, and results in R_X86_64_RELATIVE
relocations that apply a 64-bit relocation to a 32-bit field anyway.
This happens to work because nothing will process these run-time
relocations.
Start fixing this by removing relocations from .head.text:
- On 32-bit, use a base register that holds the address of the GOT and
reference symbol addresses using @GOTOFF, i.e.
leal gdt@...OFF(%edx), %eax
- On 64-bit, most of the code can (and already does) use %rip-relative
addressing, however the .code32 bits can't, and the 64-bit code also
needs to reference symbol addresses as they will be after moving the
compressed kernel to the end of the decompression buffer.
For these cases, reference the symbols as an offset to startup_32 to
avoid creating relocations, i.e.
leal (gdt-startup_32)(%bp), %eax
This only works in .head.text as the subtraction cannot be represented
as a PC-relative relocation unless startup_32 is in the same section
as the code. Move efi32_pe_entry into .head.text so that it can use
the same method to avoid relocations.
Signed-off-by: Arvind Sankar <nivedita@...m.mit.edu>
---
arch/x86/boot/compressed/head_32.S | 40 +++++------
arch/x86/boot/compressed/head_64.S | 104 ++++++++++++++++++-----------
2 files changed, 86 insertions(+), 58 deletions(-)
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index dfa4131c65df..66657bb99aae 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -73,10 +73,10 @@ SYM_FUNC_START(startup_32)
leal (BP_scratch+4)(%esi), %esp
call 1f
1: popl %edx
- subl $1b, %edx
+ addl $_GLOBAL_OFFSET_TABLE_+(.-1b), %edx
/* Load new GDT */
- leal gdt(%edx), %eax
+ leal gdt@...OFF(%edx), %eax
movl %eax, 2(%eax)
lgdt (%eax)
@@ -89,14 +89,16 @@ SYM_FUNC_START(startup_32)
movl %eax, %ss
/*
- * %edx contains the address we are loaded at by the boot loader and %ebx
- * contains the address where we should move the kernel image temporarily
- * for safe in-place decompression. %ebp contains the address that the kernel
- * will be decompressed to.
+ * %edx contains the address we are loaded at by the boot loader (plus the
+ * offset to the GOT). The below code calculates %ebx to be the address where
+ * we should move the kernel image temporarily for safe in-place decompression
+ * (again, plus the offset to the GOT).
+ *
+ * %ebp is calculated to be the address that the kernel will be decompressed to.
*/
#ifdef CONFIG_RELOCATABLE
- movl %edx, %ebx
+ leal startup_32@...OFF(%edx), %ebx
#ifdef CONFIG_EFI_STUB
/*
@@ -107,7 +109,7 @@ SYM_FUNC_START(startup_32)
* image_offset = startup_32 - image_base
* Otherwise image_offset will be zero and has no effect on the calculations.
*/
- subl image_offset(%edx), %ebx
+ subl image_offset@...OFF(%edx), %ebx
#endif
movl BP_kernel_alignment(%esi), %eax
@@ -124,10 +126,10 @@ SYM_FUNC_START(startup_32)
movl %ebx, %ebp // Save the output address for later
/* Target address to relocate to for decompression */
addl BP_init_size(%esi), %ebx
- subl $_end, %ebx
+ subl $_end@...OFF, %ebx
/* Set up the stack */
- leal boot_stack_end(%ebx), %esp
+ leal boot_stack_end@...OFF(%ebx), %esp
/* Zero EFLAGS */
pushl $0
@@ -138,8 +140,8 @@ SYM_FUNC_START(startup_32)
* where decompression in place becomes safe.
*/
pushl %esi
- leal (_bss-4)(%edx), %esi
- leal (_bss-4)(%ebx), %edi
+ leal (_bss@...OFF-4)(%edx), %esi
+ leal (_bss@...OFF-4)(%ebx), %edi
movl $(_bss - startup_32), %ecx
shrl $2, %ecx
std
@@ -152,14 +154,14 @@ SYM_FUNC_START(startup_32)
* during extract_kernel below. To avoid any issues, repoint the GDTR
* to the new copy of the GDT.
*/
- leal gdt(%ebx), %eax
+ leal gdt@...OFF(%ebx), %eax
movl %eax, 2(%eax)
lgdt (%eax)
/*
* Jump to the relocated address.
*/
- leal .Lrelocated(%ebx), %eax
+ leal .Lrelocated@...OFF(%ebx), %eax
jmp *%eax
SYM_FUNC_END(startup_32)
@@ -169,7 +171,7 @@ SYM_FUNC_START_ALIAS(efi_stub_entry)
add $0x4, %esp
movl 8(%esp), %esi /* save boot_params pointer */
call efi_main
- leal startup_32(%eax), %eax
+ /* efi_main returns the possibly relocated address of startup_32 */
jmp *%eax
SYM_FUNC_END(efi32_stub_entry)
SYM_FUNC_END_ALIAS(efi_stub_entry)
@@ -182,8 +184,8 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
* Clear BSS (stack is currently empty)
*/
xorl %eax, %eax
- leal _bss(%ebx), %edi
- leal _ebss(%ebx), %ecx
+ leal _bss@...OFF(%ebx), %edi
+ leal _ebss@...OFF(%ebx), %ecx
subl %edi, %ecx
shrl $2, %ecx
rep stosl
@@ -197,9 +199,9 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
pushl %ebp /* output address */
pushl $z_input_len /* input_len */
- leal input_data(%ebx), %eax
+ leal input_data@...OFF(%ebx), %eax
pushl %eax /* input_data */
- leal boot_heap(%ebx), %eax
+ leal boot_heap@...OFF(%ebx), %eax
pushl %eax /* heap area */
pushl %esi /* real mode pointer */
call extract_kernel /* returns kernel location in %eax */
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 706fbf6eef53..18b0edcb23d2 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -42,6 +42,32 @@
.hidden _ebss
__HEAD
+
+/*
+ * This macro gives the relative virtual address of X, i.e. the offset of X
+ * from startup_32. This is the same as the link-time virtual address of X,
+ * since startup_32 is at 0, but defining it this way tells the
+ * assembler/linker that we do not want the actual run-time address of X. This
+ * prevents the linker from trying to create unwanted run-time relocation
+ * entries for the reference when the compressed kernel is linked as PIE.
+ *
+ * A reference X(%reg) will result in the link-time VA of X being stored with
+ * the instruction, and a run-time R_X86_64_RELATIVE relocation entry that
+ * adds the 64-bit base address where the kernel is loaded.
+ *
+ * Replacing it with (X-startup_32)(%reg) results in the offset being stored,
+ * and no run-time relocation.
+ *
+ * The macro should be used as a displacement with a base register containing
+ * the run-time address of startup_32 [i.e. rva(X)(%reg)], or as an immediate
+ * [$ rva(X)].
+ *
+ * This macro can only be used from within the .head.text section, since the
+ * expression requires startup_32 to be in the same section as the code being
+ * assembled.
+ */
+#define rva(X) ((X) - startup_32)
+
.code32
SYM_FUNC_START(startup_32)
/*
@@ -64,10 +90,10 @@ SYM_FUNC_START(startup_32)
leal (BP_scratch+4)(%esi), %esp
call 1f
1: popl %ebp
- subl $1b, %ebp
+ subl $ rva(1b), %ebp
/* Load new GDT with the 64bit segments using 32bit descriptor */
- leal gdt(%ebp), %eax
+ leal rva(gdt)(%ebp), %eax
movl %eax, 2(%eax)
lgdt (%eax)
@@ -80,7 +106,7 @@ SYM_FUNC_START(startup_32)
movl %eax, %ss
/* setup a stack and make sure cpu supports long mode. */
- leal boot_stack_end(%ebp), %esp
+ leal rva(boot_stack_end)(%ebp), %esp
call verify_cpu
testl %eax, %eax
@@ -107,7 +133,7 @@ SYM_FUNC_START(startup_32)
* image_offset = startup_32 - image_base
* Otherwise image_offset will be zero and has no effect on the calculations.
*/
- subl image_offset(%ebp), %ebx
+ subl rva(image_offset)(%ebp), %ebx
#endif
movl BP_kernel_alignment(%esi), %eax
@@ -123,7 +149,7 @@ SYM_FUNC_START(startup_32)
/* Target address to relocate to for decompression */
addl BP_init_size(%esi), %ebx
- subl $_end, %ebx
+ subl $ rva(_end), %ebx
/*
* Prepare for entering 64 bit mode
@@ -151,19 +177,19 @@ SYM_FUNC_START(startup_32)
1:
/* Initialize Page tables to 0 */
- leal pgtable(%ebx), %edi
+ leal rva(pgtable)(%ebx), %edi
xorl %eax, %eax
movl $(BOOT_INIT_PGT_SIZE/4), %ecx
rep stosl
/* Build Level 4 */
- leal pgtable + 0(%ebx), %edi
+ leal rva(pgtable + 0)(%ebx), %edi
leal 0x1007 (%edi), %eax
movl %eax, 0(%edi)
addl %edx, 4(%edi)
/* Build Level 3 */
- leal pgtable + 0x1000(%ebx), %edi
+ leal rva(pgtable + 0x1000)(%ebx), %edi
leal 0x1007(%edi), %eax
movl $4, %ecx
1: movl %eax, 0x00(%edi)
@@ -174,7 +200,7 @@ SYM_FUNC_START(startup_32)
jnz 1b
/* Build Level 2 */
- leal pgtable + 0x2000(%ebx), %edi
+ leal rva(pgtable + 0x2000)(%ebx), %edi
movl $0x00000183, %eax
movl $2048, %ecx
1: movl %eax, 0(%edi)
@@ -185,7 +211,7 @@ SYM_FUNC_START(startup_32)
jnz 1b
/* Enable the boot page tables */
- leal pgtable(%ebx), %eax
+ leal rva(pgtable)(%ebx), %eax
movl %eax, %cr3
/* Enable Long mode in EFER (Extended Feature Enable Register) */
@@ -211,17 +237,17 @@ SYM_FUNC_START(startup_32)
* used to perform that far jump.
*/
pushl $__KERNEL_CS
- leal startup_64(%ebp), %eax
+ leal rva(startup_64)(%ebp), %eax
#ifdef CONFIG_EFI_MIXED
- movl efi32_boot_args(%ebp), %edi
+ movl rva(efi32_boot_args)(%ebp), %edi
cmp $0, %edi
jz 1f
- leal efi64_stub_entry(%ebp), %eax
- movl efi32_boot_args+4(%ebp), %esi
- movl efi32_boot_args+8(%ebp), %edx // saved bootparams pointer
+ leal rva(efi64_stub_entry)(%ebp), %eax
+ movl rva(efi32_boot_args+4)(%ebp), %esi
+ movl rva(efi32_boot_args+8)(%ebp), %edx // saved bootparams pointer
cmpl $0, %edx
jnz 1f
- leal efi_pe_entry(%ebp), %eax
+ leal rva(efi_pe_entry)(%ebp), %eax
movl %edi, %ecx // MS calling convention
movl %esi, %edx
1:
@@ -246,18 +272,18 @@ SYM_FUNC_START(efi32_stub_entry)
call 1f
1: pop %ebp
- subl $1b, %ebp
+ subl $ rva(1b), %ebp
- movl %esi, efi32_boot_args+8(%ebp)
+ movl %esi, rva(efi32_boot_args+8)(%ebp)
SYM_INNER_LABEL(efi32_pe_stub_entry, SYM_L_LOCAL)
- movl %ecx, efi32_boot_args(%ebp)
- movl %edx, efi32_boot_args+4(%ebp)
- movb $0, efi_is64(%ebp)
+ movl %ecx, rva(efi32_boot_args)(%ebp)
+ movl %edx, rva(efi32_boot_args+4)(%ebp)
+ movb $0, rva(efi_is64)(%ebp)
/* Save firmware GDTR and code/data selectors */
- sgdtl efi32_boot_gdt(%ebp)
- movw %cs, efi32_boot_cs(%ebp)
- movw %ds, efi32_boot_ds(%ebp)
+ sgdtl rva(efi32_boot_gdt)(%ebp)
+ movw %cs, rva(efi32_boot_cs)(%ebp)
+ movw %ds, rva(efi32_boot_ds)(%ebp)
/* Disable paging */
movl %cr0, %eax
@@ -336,11 +362,11 @@ SYM_CODE_START(startup_64)
/* Target address to relocate to for decompression */
movl BP_init_size(%rsi), %ebx
- subl $_end, %ebx
+ subl $ rva(_end), %ebx
addq %rbp, %rbx
/* Set up the stack */
- leaq boot_stack_end(%rbx), %rsp
+ leaq rva(boot_stack_end)(%rbx), %rsp
/*
* At this point we are in long mode with 4-level paging enabled,
@@ -406,7 +432,7 @@ SYM_CODE_START(startup_64)
lretq
trampoline_return:
/* Restore the stack, the 32-bit trampoline uses its own stack */
- leaq boot_stack_end(%rbx), %rsp
+ leaq rva(boot_stack_end)(%rbx), %rsp
/*
* cleanup_trampoline() would restore trampoline memory.
@@ -418,7 +444,7 @@ trampoline_return:
* this function call.
*/
pushq %rsi
- leaq top_pgtable(%rbx), %rdi
+ leaq rva(top_pgtable)(%rbx), %rdi
call cleanup_trampoline
popq %rsi
@@ -432,9 +458,9 @@ trampoline_return:
*/
pushq %rsi
leaq (_bss-8)(%rip), %rsi
- leaq (_bss-8)(%rbx), %rdi
- movq $_bss /* - $startup_32 */, %rcx
- shrq $3, %rcx
+ leaq rva(_bss-8)(%rbx), %rdi
+ movl $(_bss - startup_32), %ecx
+ shrl $3, %ecx
std
rep movsq
cld
@@ -445,15 +471,15 @@ trampoline_return:
* during extract_kernel below. To avoid any issues, repoint the GDTR
* to the new copy of the GDT.
*/
- leaq gdt64(%rbx), %rax
- leaq gdt(%rbx), %rdx
+ leaq rva(gdt64)(%rbx), %rax
+ leaq rva(gdt)(%rbx), %rdx
movq %rdx, 2(%rax)
lgdt (%rax)
/*
* Jump to the relocated address.
*/
- leaq .Lrelocated(%rbx), %rax
+ leaq rva(.Lrelocated)(%rbx), %rax
jmp *%rax
SYM_CODE_END(startup_64)
@@ -465,7 +491,7 @@ SYM_FUNC_START_ALIAS(efi_stub_entry)
movq %rdx, %rbx /* save boot_params pointer */
call efi_main
movq %rbx,%rsi
- leaq startup_64(%rax), %rax
+ leaq rva(startup_64)(%rax), %rax
jmp *%rax
SYM_FUNC_END(efi64_stub_entry)
SYM_FUNC_END_ALIAS(efi_stub_entry)
@@ -628,7 +654,7 @@ SYM_DATA(efi_is64, .byte 1)
#define BS32_handle_protocol 88 // offsetof(efi_boot_services_32_t, handle_protocol)
#define LI32_image_base 32 // offsetof(efi_loaded_image_32_t, image_base)
- .text
+ __HEAD
.code32
SYM_FUNC_START(efi32_pe_entry)
/*
@@ -650,12 +676,12 @@ SYM_FUNC_START(efi32_pe_entry)
call 1f
1: pop %ebx
- subl $1b, %ebx
+ subl $ rva(1b), %ebx
/* Get the loaded image protocol pointer from the image handle */
leal -4(%ebp), %eax
pushl %eax // &loaded_image
- leal loaded_image_proto(%ebx), %eax
+ leal rva(loaded_image_proto)(%ebx), %eax
pushl %eax // pass the GUID address
pushl 8(%ebp) // pass the image handle
@@ -690,7 +716,7 @@ SYM_FUNC_START(efi32_pe_entry)
* use it before we get to the 64-bit efi_pe_entry() in C code.
*/
subl %esi, %ebx
- movl %ebx, image_offset(%ebp) // save image_offset
+ movl %ebx, rva(image_offset)(%ebp) // save image_offset
jmp efi32_pe_stub_entry
2: popl %edi // restore callee-save registers
--
2.26.2
Powered by blists - more mailing lists