lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Tue, 26 May 2020 20:53:35 +0200 From: Greg Kroah-Hartman <gregkh@...uxfoundation.org> To: linux-kernel@...r.kernel.org Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>, stable@...r.kernel.org, Dragos Bogdan <dragos.bogdan@...log.com>, Alexandru Ardelean <alexandru.ardelean@...log.com>, Stable@...r.kernel.org, Jonathan Cameron <Jonathan.Cameron@...wei.com> Subject: [PATCH 4.14 50/59] staging: iio: ad2s1210: Fix SPI reading From: Dragos Bogdan <dragos.bogdan@...log.com> commit 5e4f99a6b788047b0b8a7496c2e0c8f372f6edf2 upstream. If the serial interface is used, the 8-bit address should be latched using the rising edge of the WR/FSYNC signal. This basically means that a CS change is required between the first byte sent, and the second one. This change splits the single-transfer transfer of 2 bytes into 2 transfers with a single byte, and CS change in-between. Note fixes tag is not accurate, but reflects a point beyond which there are too many refactors to make backporting straight forward. Fixes: b19e9ad5e2cb ("staging:iio:resolver:ad2s1210 general driver cleanup.") Signed-off-by: Dragos Bogdan <dragos.bogdan@...log.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com> Cc: <Stable@...r.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@...wei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org> --- drivers/staging/iio/resolver/ad2s1210.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) --- a/drivers/staging/iio/resolver/ad2s1210.c +++ b/drivers/staging/iio/resolver/ad2s1210.c @@ -126,17 +126,24 @@ static int ad2s1210_config_write(struct static int ad2s1210_config_read(struct ad2s1210_state *st, unsigned char address) { - struct spi_transfer xfer = { - .len = 2, - .rx_buf = st->rx, - .tx_buf = st->tx, + struct spi_transfer xfers[] = { + { + .len = 1, + .rx_buf = &st->rx[0], + .tx_buf = &st->tx[0], + .cs_change = 1, + }, { + .len = 1, + .rx_buf = &st->rx[1], + .tx_buf = &st->tx[1], + }, }; int ret = 0; ad2s1210_set_mode(MOD_CONFIG, st); st->tx[0] = address | AD2S1210_MSB_IS_HIGH; st->tx[1] = AD2S1210_REG_FAULT; - ret = spi_sync_transfer(st->sdev, &xfer, 1); + ret = spi_sync_transfer(st->sdev, xfers, 2); if (ret < 0) return ret; st->old_data = true;
Powered by blists - more mailing lists