linux-kernel - [PATCH for-5.8 2/2] usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200526202943.715220-3-martin.blumenstingl@googlemail.com>
Date:   Tue, 26 May 2020 22:29:43 +0200
From:   Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To:     balbi@...nel.org, gregkh@...uxfoundation.org,
        linux-usb@...r.kernel.org, linux-amlogic@...ts.infradead.org,
        narmstrong@...libre.com
Cc:     hanjie.lin@...ogic.com, yue.wang@...ogic.com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
        "kernelci.org bot" <bot@...nelci.org>
Subject: [PATCH for-5.8 2/2] usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs

dwc3_meson_g12a_usb2_init_phy() crashes with NULL pointer on an SM1
board (which uses the same USB setup as G12A) dereference as reported
by the Kernel CI bot. This is because of the following call flow:
  dwc3_meson_g12a_probe
    priv->drvdata->setup_regmaps
      dwc3_meson_g12a_setup_regmaps
        priv->usb2_ports is still 0 so priv->u2p_regmap[i] will be NULL
    dwc3_meson_g12a_get_phys
      initializes priv->usb2_ports
    priv->drvdata->usb_init
      dwc3_meson_g12a_usb_init
        dwc3_meson_g12a_usb_init_glue
          dwc3_meson_g12a_usb2_init
            priv->drvdata->usb2_init_phy
              dwc3_meson_g12a_usb2_init_phy
                dereferences priv->u2p_regmap[i]

Call priv->drvdata->setup_regmaps only after dwc3_meson_g12a_get_phys so
priv->usb2_ports is initialized and the regmaps will be set up
correctly. This fixes the NULL dereference later on.

Fixes: 013af227f58a97 ("usb: dwc3: meson-g12a: handle the phy and glue registers separately")
Reported-by: "kernelci.org bot" <bot@...nelci.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index ce5388338389..1f7f4d88ed9d 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -708,11 +708,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 		return PTR_ERR(base);
 
 	priv->drvdata = of_device_get_match_data(&pdev->dev);
-
 	priv->dev = dev;
-	ret = priv->drvdata->setup_regmaps(priv, base);
-	if (ret)
-		return ret;
 
 	priv->vbus = devm_regulator_get_optional(dev, "vbus");
 	if (IS_ERR(priv->vbus)) {
@@ -749,6 +745,10 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_disable_clks;
 
+	ret = priv->drvdata->setup_regmaps(priv, base);
+	if (ret)
+		return ret;
+
 	if (priv->vbus) {
 		ret = regulator_enable(priv->vbus);
 		if (ret)
-- 
2.26.2