| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200526215708.3vp4z4qjzpj66t36@ti.com>
Date: Tue, 26 May 2020 16:57:09 -0500
From: Benoit Parrot <bparrot@...com>
To: Hans Verkuil <hverkuil@...all.nl>
CC: Rob Herring <robh+dt@...nel.org>, <linux-media@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Nikhil Devshatwar <nikhil.nd@...com>
Subject: Re: [Patch 2/2] media: ti-vpe: Add the VIP driver
Hans,
Thanks for the review.
Hans Verkuil <hverkuil@...all.nl> wrote on Tue [2020-May-26 13:48:35 +0200]:
> On 23/05/2020 00:54, Benoit Parrot wrote:
> > VIP stands for Video Input Port, it can be found on devices such as
> > DRA7xx and provides a parallel interface to a video source such as
> > a sensor or TV decoder. Each VIP can support two inputs (slices) and
> > a SoC can be configured with a variable number of VIP's.
> > Each slice can supports two ports each connected to its own
> > sub-device.
> >
> > Signed-off-by: Benoit Parrot <bparrot@...com>
> > Signed-off-by: Nikhil Devshatwar <nikhil.nd@...com>
> > ---
> > drivers/media/platform/Kconfig | 13 +
> > drivers/media/platform/ti-vpe/Makefile | 2 +
> > drivers/media/platform/ti-vpe/vip.c | 4158 ++++++++++++++++++++++++
> > drivers/media/platform/ti-vpe/vip.h | 724 +++++
> > 4 files changed, 4897 insertions(+)
> > create mode 100644 drivers/media/platform/ti-vpe/vip.c
> > create mode 100644 drivers/media/platform/ti-vpe/vip.h
> >
> > diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> > index c57ee78fa99d..f4100a1aad58 100644
> > --- a/drivers/media/platform/Kconfig
> > +++ b/drivers/media/platform/Kconfig
> > @@ -168,6 +168,19 @@ config VIDEO_TI_CAL
> > In TI Technical Reference Manual this module is referred as
> > Camera Interface Subsystem (CAMSS).
> >
> > +config VIDEO_TI_VIP
> > + tristate "TI Video Input Port"
> > + default n
> > + depends on VIDEO_DEV && VIDEO_V4L2 && SOC_DRA7XX
> > + depends on HAS_DMA
> > + select VIDEOBUF2_DMA_CONTIG
> > + select VIDEO_TI_VPDMA
> > + select VIDEO_TI_SC
> > + select VIDEO_TI_CSC
> > + help
> > + Driver support for VIP module on certain TI SoC's
> > + VIP = Video Input Port.
> > +
> > endif # V4L_PLATFORM_DRIVERS
> >
> > menuconfig V4L_MEM2MEM_DRIVERS
> > diff --git a/drivers/media/platform/ti-vpe/Makefile b/drivers/media/platform/ti-vpe/Makefile
> > index 886ac5ec073f..cdbecadf7191 100644
> > --- a/drivers/media/platform/ti-vpe/Makefile
> > +++ b/drivers/media/platform/ti-vpe/Makefile
> > @@ -3,11 +3,13 @@ obj-$(CONFIG_VIDEO_TI_VPE) += ti-vpe.o
> > obj-$(CONFIG_VIDEO_TI_VPDMA) += ti-vpdma.o
> > obj-$(CONFIG_VIDEO_TI_SC) += ti-sc.o
> > obj-$(CONFIG_VIDEO_TI_CSC) += ti-csc.o
> > +obj-$(CONFIG_VIDEO_TI_VIP) += ti-vip.o
> >
> > ti-vpe-y := vpe.o
> > ti-vpdma-y := vpdma.o
> > ti-sc-y := sc.o
> > ti-csc-y := csc.o
> > +ti-vip-y := vip.o
> >
> > ccflags-$(CONFIG_VIDEO_TI_VPE_DEBUG) += -DDEBUG
> >
> > diff --git a/drivers/media/platform/ti-vpe/vip.c b/drivers/media/platform/ti-vpe/vip.c
> > new file mode 100644
> > index 000000000000..307b01851a14
> > --- /dev/null
> > +++ b/drivers/media/platform/ti-vpe/vip.c
> > @@ -0,0 +1,4158 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * TI VIP capture driver
> > + *
> > + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
> > + * David Griego, <dagriego@...lakesoftware.com>
> > + * Dale Farnsworth, <dale@...nsworth.org>
> > + * Nikhil Devshatwar, <nikhil.nd@...com>
> > + * Benoit Parrot, <bparrot@...com>
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/err.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/module.h>
> > +#include <linux/workqueue.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/sched.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/regmap.h>
> > +
> > +#include <linux/pinctrl/consumer.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_graph.h>
> > +
> > +#include "vip.h"
> > +
> > +#define VIP_MODULE_NAME "vip"
> > +
> > +static int debug;
> > +module_param(debug, int, 0644);
> > +MODULE_PARM_DESC(debug, "debug level (0-8)");
> > +
> > +/*
> > + * Minimum and maximum frame sizes
> > + */
> > +#define MIN_W 128
> > +#define MIN_H 128
> > +#define MAX_W 2048
> > +#define MAX_H 1536
> > +
> > +/*
> > + * Required alignments
> > + */
> > +#define S_ALIGN 0 /* multiple of 1 */
> > +#define H_ALIGN 1 /* multiple of 2 */
> > +#define W_ALIGN 1 /* multiple of 2 */
> > +#define L_ALIGN 7 /* multiple of 128, line stride, 16 bytes */
> > +
> > +/*
> > + * Need a descriptor entry for each of up to 15 outputs,
> > + * and up to 2 control transfers.
> > + */
> > +#define VIP_DESC_LIST_SIZE (17 * sizeof(struct vpdma_dtd))
> > +
> > +#define vip_dbg(level, dev, fmt, arg...) \
> > + v4l2_dbg(level, debug, dev, fmt, ##arg)
> > +#define vip_err(dev, fmt, arg...) \
> > + v4l2_err(dev, fmt, ##arg)
> > +#define vip_warn(dev, fmt, arg...) \
> > + v4l2_err(dev, fmt, ##arg)
> > +#define vip_info(dev, fmt, arg...) \
> > + v4l2_info(dev, fmt, ##arg)
>
> These defines are just aliases. Any reason for not just using v4l2_info etc.?
Yeah at some point the macros were abstracting the &dev->v4l2_dev but not
any longeri since I figured out they are only using the ->name member, so I
guess I could remove them.
>
> > +
> > +#define CTRL_CORE_SMA_SW_1 0x534
> > +/*
> > + * The srce_info structure contains per-srce data.
> > + */
> > +struct vip_srce_info {
> > + u8 base_channel; /* the VPDMA channel nummber */
> > + u8 vb_index; /* input frame f, f-1, f-2 index */
> > + u8 vb_part; /* identifies section of co-planar formats */
> > +};
> > +
> > +#define VIP_VPDMA_FIFO_SIZE 2
> > +#define VIP_DROPQ_SIZE 3
> > +
> > +/*
> > + * Define indices into the srce_info tables
> > + */
> > +
> > +#define VIP_SRCE_MULT_PORT 0
> > +#define VIP_SRCE_MULT_ANC 1
> > +#define VIP_SRCE_LUMA 2
> > +#define VIP_SRCE_CHROMA 3
> > +#define VIP_SRCE_RGB 4
> > +
> > +static struct vip_srce_info srce_info[5] = {
> > + [VIP_SRCE_MULT_PORT] = {
> > + .base_channel = VIP1_CHAN_NUM_MULT_PORT_A_SRC0,
> > + .vb_index = 0,
> > + .vb_part = VIP_CHROMA,
> > + },
> > + [VIP_SRCE_MULT_ANC] = {
> > + .base_channel = VIP1_CHAN_NUM_MULT_ANC_A_SRC0,
> > + .vb_index = 0,
> > + .vb_part = VIP_LUMA,
> > + },
> > + [VIP_SRCE_LUMA] = {
> > + .base_channel = VIP1_CHAN_NUM_PORT_A_LUMA,
> > + .vb_index = 1,
> > + .vb_part = VIP_LUMA,
> > + },
> > + [VIP_SRCE_CHROMA] = {
> > + .base_channel = VIP1_CHAN_NUM_PORT_A_CHROMA,
> > + .vb_index = 1,
> > + .vb_part = VIP_CHROMA,
> > + },
> > + [VIP_SRCE_RGB] = {
> > + .base_channel = VIP1_CHAN_NUM_PORT_A_RGB,
> > + .vb_part = VIP_LUMA,
> > + },
> > +};
> > +
> > +static struct vip_fmt vip_formats[VIP_MAX_ACTIVE_FMT] = {
> > + {
> > + .fourcc = V4L2_PIX_FMT_NV12,
> > + .code = MEDIA_BUS_FMT_UYVY8_2X8,
> > + .colorspace = V4L2_COLORSPACE_SMPTE170M,
>
> Colorspace information should come from the subdev (sensor or video receiver).
>
> You really don't know what the colorspace is here.
Ah yes, this has been here for a long time...
I'll clean it up.
>
> > + .coplanar = 1,
> > + .vpdma_fmt = { &vpdma_yuv_fmts[VPDMA_DATA_FMT_Y420],
> > + &vpdma_yuv_fmts[VPDMA_DATA_FMT_C420],
> > + },
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_UYVY,
> > + .code = MEDIA_BUS_FMT_UYVY8_2X8,
> > + .colorspace = V4L2_COLORSPACE_SMPTE170M,
> > + .coplanar = 0,
> > + .vpdma_fmt = { &vpdma_yuv_fmts[VPDMA_DATA_FMT_CBY422],
> > + },
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_YUYV,
> > + .code = MEDIA_BUS_FMT_UYVY8_2X8,
> > + .colorspace = V4L2_COLORSPACE_SMPTE170M,
> > + .coplanar = 0,
> > + .vpdma_fmt = { &vpdma_yuv_fmts[VPDMA_DATA_FMT_YCB422],
> > + },
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_VYUY,
> > + .code = MEDIA_BUS_FMT_UYVY8_2X8,
> > + .colorspace = V4L2_COLORSPACE_SMPTE170M,
> > + .coplanar = 0,
> > + .vpdma_fmt = { &vpdma_yuv_fmts[VPDMA_DATA_FMT_CRY422],
> > + },
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_YVYU,
> > + .code = MEDIA_BUS_FMT_UYVY8_2X8,
> > + .colorspace = V4L2_COLORSPACE_SMPTE170M,
> > + .coplanar = 0,
> > + .vpdma_fmt = { &vpdma_yuv_fmts[VPDMA_DATA_FMT_YCR422],
> > + },
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_RGB24,
> > + .code = MEDIA_BUS_FMT_UYVY8_2X8,
> > + .colorspace = V4L2_COLORSPACE_SRGB,
> > + .coplanar = 0,
> > + .vpdma_fmt = { &vpdma_rgb_fmts[VPDMA_DATA_FMT_RGB24],
> > + },
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_RGB32,
> > + .code = MEDIA_BUS_FMT_UYVY8_2X8,
> > + .colorspace = V4L2_COLORSPACE_SRGB,
> > + .coplanar = 0,
> > + .vpdma_fmt = { &vpdma_rgb_fmts[VPDMA_DATA_FMT_ARGB32],
> > + },
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_BGR24,
> > + .code = MEDIA_BUS_FMT_UYVY8_2X8,
> > + .colorspace = V4L2_COLORSPACE_SRGB,
> > + .coplanar = 0,
> > + .vpdma_fmt = { &vpdma_rgb_fmts[VPDMA_DATA_FMT_BGR24],
> > + },
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_BGR32,
> > + .code = MEDIA_BUS_FMT_UYVY8_2X8,
> > + .colorspace = V4L2_COLORSPACE_SRGB,
> > + .coplanar = 0,
> > + .vpdma_fmt = { &vpdma_rgb_fmts[VPDMA_DATA_FMT_ABGR32],
> > + },
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_RGB24,
> > + .code = MEDIA_BUS_FMT_RGB888_1X24,
> > + .colorspace = V4L2_COLORSPACE_SRGB,
> > + .coplanar = 0,
> > + .vpdma_fmt = { &vpdma_rgb_fmts[VPDMA_DATA_FMT_RGB24],
> > + },
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_RGB32,
> > + .code = MEDIA_BUS_FMT_ARGB8888_1X32,
> > + .colorspace = V4L2_COLORSPACE_SRGB,
> > + .coplanar = 0,
> > + .vpdma_fmt = { &vpdma_rgb_fmts[VPDMA_DATA_FMT_ARGB32],
> > + },
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_SBGGR8,
> > + .code = MEDIA_BUS_FMT_SBGGR8_1X8,
> > + .colorspace = V4L2_COLORSPACE_SMPTE170M,
>
> SMPTE 170M for a Bayer format? That can't be right. But as mentioned above,
> this should come from the subdev.
Same here.
>
> > + .coplanar = 0,
> > + .vpdma_fmt = { &vpdma_raw_fmts[VPDMA_DATA_FMT_RAW8],
> > + },
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_SGBRG8,
> > + .code = MEDIA_BUS_FMT_SGBRG8_1X8,
> > + .colorspace = V4L2_COLORSPACE_SMPTE170M,
> > + .coplanar = 0,
> > + .vpdma_fmt = { &vpdma_raw_fmts[VPDMA_DATA_FMT_RAW8],
> > + },
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_SGRBG8,
> > + .code = MEDIA_BUS_FMT_SGRBG8_1X8,
> > + .colorspace = V4L2_COLORSPACE_SMPTE170M,
> > + .coplanar = 0,
> > + .vpdma_fmt = { &vpdma_raw_fmts[VPDMA_DATA_FMT_RAW8],
> > + },
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_SRGGB8,
> > + .code = MEDIA_BUS_FMT_SRGGB8_1X8,
> > + .colorspace = V4L2_COLORSPACE_SMPTE170M,
> > + .coplanar = 0,
> > + .vpdma_fmt = { &vpdma_raw_fmts[VPDMA_DATA_FMT_RAW8],
> > + },
> > + },
> > + {
> > + /* V4L2 currently only defines one 16 bit variant */
> > + .fourcc = V4L2_PIX_FMT_SBGGR16,
> > + .code = MEDIA_BUS_FMT_SBGGR16_1X16,
> > + .colorspace = V4L2_COLORSPACE_SMPTE170M,
> > + .coplanar = 0,
> > + .vpdma_fmt = { &vpdma_raw_fmts[VPDMA_DATA_FMT_RAW16],
> > + },
> > + },
> > +};
> > +
> > +/* initialize v4l2_format_info member in vip_formats array */
> > +static void vip_init_format_info(struct device *dev)
> > +{
> > + struct vip_fmt *fmt;
> > + int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(vip_formats); i++) {
> > + fmt = &vip_formats[i];
> > + fmt->finfo = v4l2_format_info(fmt->fourcc);
> > + }
> > +}
> > +
> > +/* Print Four-character-code (FOURCC) */
> > +static char *fourcc_to_str(u32 fmt)
> > +{
> > + static char code[5];
> > +
> > + code[0] = (unsigned char)(fmt & 0xff);
> > + code[1] = (unsigned char)((fmt >> 8) & 0xff);
> > + code[2] = (unsigned char)((fmt >> 16) & 0xff);
> > + code[3] = (unsigned char)((fmt >> 24) & 0xff);
> > + code[4] = '\0';
> > +
> > + return code;
> > +}
> > +
> > +/*
> > + * Find our format description corresponding to the passed v4l2_format
> > + */
> > +
> > +static struct vip_fmt *find_port_format_by_pix(struct vip_port *port,
> > + u32 pixelformat)
> > +{
> > + struct vip_fmt *fmt;
> > + unsigned int k;
> > +
> > + for (k = 0; k < port->num_active_fmt; k++) {
> > + fmt = port->active_fmt[k];
> > + if (fmt->fourcc == pixelformat)
> > + return fmt;
> > + }
> > +
> > + return NULL;
> > +}
> > +
> > +static struct vip_fmt *find_port_format_by_code(struct vip_port *port,
> > + u32 code)
> > +{
> > + struct vip_fmt *fmt;
> > + unsigned int k;
> > +
> > + for (k = 0; k < port->num_active_fmt; k++) {
> > + fmt = port->active_fmt[k];
> > + if (fmt->code == code)
> > + return fmt;
> > + }
> > +
> > + return NULL;
> > +}
> > +
> > +static int vip_find_pad(struct v4l2_subdev *sd, int direction)
> > +{
> > + unsigned int pad;
> > +
> > + if (sd->entity.num_pads <= 1)
> > + return 0;
> > +
> > + for (pad = 0; pad < sd->entity.num_pads; pad++)
> > + if (sd->entity.pads[pad].flags & direction)
> > + return pad;
> > +
> > + return -EINVAL;
> > +}
> > +
> > +inline struct vip_port *notifier_to_vip_port(struct v4l2_async_notifier *n)
> > +{
> > + return container_of(n, struct vip_port, notifier);
> > +}
> > +
> > +static bool vip_is_mbuscode_yuv(u32 code)
> > +{
> > + return ((code & 0xFF00) == 0x2000);
>
> Use lower-case hex.
Will do.
>
> > +}
> > +
> > +static bool vip_is_mbuscode_rgb(u32 code)
> > +{
> > + return ((code & 0xFF00) == 0x1000);
> > +}
> > +
> > +static bool vip_is_mbuscode_raw(u32 code)
> > +{
> > + return ((code & 0xFF00) == 0x3000);
> > +}
> > +
> > +/*
> > + * This is not an accurate conversion but it is only used to
> > + * assess if color conversion is needed.
> > + */
> > +static u32 vip_mbus_code_to_fourcc(u32 code)
> > +{
> > + if (vip_is_mbuscode_rgb(code))
> > + return V4L2_PIX_FMT_RGB24;
> > +
> > + if (vip_is_mbuscode_yuv(code))
> > + return V4L2_PIX_FMT_UYVY;
> > +
> > + return V4L2_PIX_FMT_SBGGR8;
> > +}
> > +
> > +static enum vip_csc_state
> > +vip_csc_direction(u32 src_code, const struct v4l2_format_info *dfinfo)
> > +{
> > + if (vip_is_mbuscode_yuv(src_code) && v4l2_is_format_rgb(dfinfo))
> > + return VIP_CSC_Y2R;
> > + else if (vip_is_mbuscode_rgb(src_code) && v4l2_is_format_yuv(dfinfo))
> > + return VIP_CSC_R2Y;
> > + else
> > + return VIP_CSC_NA;
> > +}
> > +
> > +/*
> > + * port flag bits
> > + */
> > +#define FLAG_FRAME_1D BIT(0)
> > +#define FLAG_EVEN_LINE_SKIP BIT(1)
> > +#define FLAG_ODD_LINE_SKIP BIT(2)
> > +#define FLAG_MODE_TILED BIT(3)
> > +#define FLAG_INTERLACED BIT(4)
> > +#define FLAG_MULTIPLEXED BIT(5)
> > +#define FLAG_MULT_PORT BIT(6)
> > +#define FLAG_MULT_ANC BIT(7)
> > +
> > +/*
> > + * Function prototype declarations
> > + */
> > +static int alloc_port(struct vip_dev *, int, const char *);
> > +static void free_port(struct vip_port *);
> > +static int vip_setup_parser(struct vip_port *port);
> > +static int vip_setup_scaler(struct vip_stream *stream);
> > +static void vip_enable_parser(struct vip_port *port, bool on);
> > +static void vip_reset_parser(struct vip_port *port, bool on);
> > +static void vip_parser_stop_imm(struct vip_port *port, bool on);
> > +static void stop_dma(struct vip_stream *stream, bool clear_list);
> > +static int vip_load_vpdma_list_fifo(struct vip_stream *stream);
> > +static inline bool is_scaler_available(struct vip_port *port);
> > +static inline bool allocate_scaler(struct vip_port *port);
> > +static inline void free_scaler(struct vip_port *port);
> > +static bool is_csc_available(struct vip_port *port);
> > +static bool allocate_csc(struct vip_port *port,
> > + enum vip_csc_state csc_direction);
> > +static void free_csc(struct vip_port *port);
> > +
> > +#define reg_read(dev, offset) ioread32(dev->base + offset)
> > +#define reg_write(dev, offset, val) iowrite32(val, dev->base + offset)
> > +
> > +/*
> > + * Insert a masked field into a 32-bit field
> > + */
> > +static void insert_field(u32 *valp, u32 field, u32 mask, int shift)
> > +{
> > + u32 val = *valp;
> > +
> > + val &= ~(mask << shift);
> > + val |= (field & mask) << shift;
> > + *valp = val;
> > +}
> > +
> > +/*
> > + * DMA address/data block for the shadow registers
> > + */
> > +struct vip_mmr_adb {
> > + struct vpdma_adb_hdr sc_hdr0;
> > + u32 sc_regs0[7];
> > + u32 sc_pad0[1];
> > + struct vpdma_adb_hdr sc_hdr8;
> > + u32 sc_regs8[6];
> > + u32 sc_pad8[2];
> > + struct vpdma_adb_hdr sc_hdr17;
> > + u32 sc_regs17[9];
> > + u32 sc_pad17[3];
> > + struct vpdma_adb_hdr csc_hdr;
> > + u32 csc_regs[6];
> > + u32 csc_pad[2];
> > +};
> > +
> > +#define GET_OFFSET_TOP(port, obj, reg) \
> > + ((obj)->res->start - port->dev->res->start + reg)
> > +
> > +#define VIP_SET_MMR_ADB_HDR(port, hdr, regs, offset_a) \
> > + VPDMA_SET_MMR_ADB_HDR(port->mmr_adb, vip_mmr_adb, hdr, regs, offset_a)
> > +
> > +/*
> > + * Set the headers for all of the address/data block structures.
> > + */
> > +static void init_adb_hdrs(struct vip_port *port)
> > +{
> > + VIP_SET_MMR_ADB_HDR(port, sc_hdr0, sc_regs0,
> > + GET_OFFSET_TOP(port, port->dev->sc, CFG_SC0));
> > + VIP_SET_MMR_ADB_HDR(port, sc_hdr8, sc_regs8,
> > + GET_OFFSET_TOP(port, port->dev->sc, CFG_SC8));
> > + VIP_SET_MMR_ADB_HDR(port, sc_hdr17, sc_regs17,
> > + GET_OFFSET_TOP(port, port->dev->sc, CFG_SC17));
> > + VIP_SET_MMR_ADB_HDR(port, csc_hdr, csc_regs,
> > + GET_OFFSET_TOP(port, port->dev->csc, CSC_CSC00));
> > +
> > +};
> > +
> > +/*
> > + * These represent the module resets bit for slice 1
> > + * Upon detecting slice2 we simply left shift by 1
> > + */
> > +#define VIP_DP_RST BIT(16)
> > +#define VIP_PARSER_RST BIT(18)
> > +#define VIP_CSC_RST BIT(20)
> > +#define VIP_SC_RST BIT(22)
> > +#define VIP_DS0_RST BIT(25)
> > +#define VIP_DS1_RST BIT(27)
> > +
> > +static void vip_module_reset(struct vip_dev *dev, uint32_t module, bool on)
> > +{
> > + u32 val = 0;
> > +
> > + val = reg_read(dev, VIP_CLK_RESET);
> > +
> > + if (dev->slice_id == VIP_SLICE2)
> > + module <<= 1;
> > +
> > + if (on)
> > + val |= module;
> > + else
> > + val &= ~module;
> > +
> > + reg_write(dev, VIP_CLK_RESET, val);
> > +}
> > +
> > +/*
> > + * Enable or disable the VIP clocks
> > + */
> > +static void vip_set_clock_enable(struct vip_dev *dev, bool on)
> > +{
> > + u32 val = 0;
> > +
> > + val = reg_read(dev, VIP_CLK_ENABLE);
> > + if (on) {
> > + val |= VIP_VPDMA_CLK_ENABLE;
> > + if (dev->slice_id == VIP_SLICE1)
> > + val |= VIP_VIP1_DATA_PATH_CLK_ENABLE;
> > + else
> > + val |= VIP_VIP2_DATA_PATH_CLK_ENABLE;
> > + } else {
> > + if (dev->slice_id == VIP_SLICE1)
> > + val &= ~VIP_VIP1_DATA_PATH_CLK_ENABLE;
> > + else
> > + val &= ~VIP_VIP2_DATA_PATH_CLK_ENABLE;
> > +
> > + /* Both VIP are disabled then shutdown VPDMA also */
> > + if (!(val & (VIP_VIP1_DATA_PATH_CLK_ENABLE |
> > + VIP_VIP2_DATA_PATH_CLK_ENABLE)))
> > + val = 0;
> > + }
> > +
> > + reg_write(dev, VIP_CLK_ENABLE, val);
> > +}
> > +
> > +/* This helper function is used to enable the clock early on to
> > + * enable vpdma firmware loading before the slice device are created
> > + */
> > +static void vip_shared_set_clock_enable(struct vip_shared *shared, bool on)
> > +{
> > + u32 val = 0;
> > +
> > + if (on)
> > + val = VIP_VIP1_DATA_PATH_CLK_ENABLE | VIP_VPDMA_CLK_ENABLE;
> > +
> > + reg_write(shared, VIP_CLK_ENABLE, val);
> > +}
> > +
> > +static void vip_top_reset(struct vip_dev *dev)
> > +{
> > + u32 val = 0;
> > +
> > + val = reg_read(dev, VIP_CLK_RESET);
> > +
> > + if (dev->slice_id == VIP_SLICE1)
> > + insert_field(&val, 1, VIP_DATA_PATH_CLK_RESET_MASK,
> > + VIP_VIP1_DATA_PATH_RESET_SHIFT);
> > + else
> > + insert_field(&val, 1, VIP_DATA_PATH_CLK_RESET_MASK,
> > + VIP_VIP2_DATA_PATH_RESET_SHIFT);
> > +
> > + reg_write(dev, VIP_CLK_RESET, val);
> > +
> > + usleep_range(200, 250);
> > +
> > + val = reg_read(dev, VIP_CLK_RESET);
> > +
> > + if (dev->slice_id == VIP_SLICE1)
> > + insert_field(&val, 0, VIP_DATA_PATH_CLK_RESET_MASK,
> > + VIP_VIP1_DATA_PATH_RESET_SHIFT);
> > + else
> > + insert_field(&val, 0, VIP_DATA_PATH_CLK_RESET_MASK,
> > + VIP_VIP2_DATA_PATH_RESET_SHIFT);
> > + reg_write(dev, VIP_CLK_RESET, val);
> > +}
> > +
> > +static void vip_top_vpdma_reset(struct vip_shared *shared)
> > +{
> > + u32 val;
> > +
> > + val = reg_read(shared, VIP_CLK_RESET);
> > + insert_field(&val, 1, VIP_VPDMA_CLK_RESET_MASK,
> > + VIP_VPDMA_CLK_RESET_SHIFT);
> > + reg_write(shared, VIP_CLK_RESET, val);
> > +
> > + usleep_range(200, 250);
> > +
> > + val = reg_read(shared, VIP_CLK_RESET);
> > + insert_field(&val, 0, VIP_VPDMA_CLK_RESET_MASK,
> > + VIP_VPDMA_CLK_RESET_SHIFT);
> > + reg_write(shared, VIP_CLK_RESET, val);
> > +}
> > +
> > +static void vip_set_pclk_invert(struct vip_port *port)
> > +{
> > + struct vip_clk_polarity *pclk = port->dev->pclk_pol;
> > + u32 index;
> > +
> > + /*
> > + * When the VIP parser is configured to so that the pixel clock
> > + * is to be sampled at falling edge, the pixel clock needs to be
> > + * inverted before it is given to the VIP module. This is done
> > + * by setting a bit in the CTRL_CORE_SMA_SW1 register.
> > + */
> > +
> > + index = 2 * port->dev->slice_id + port->port_id;
> > + vip_dbg(3, port, "%s: slice%d:port%d -> index: %d\n", __func__,
> > + port->dev->slice_id, port->port_id, index);
> > +
> > + if (pclk->rm_pol)
> > + regmap_update_bits(pclk->rm_pol,
> > + pclk->rm_offset,
> > + pclk->rm_bit_field[index],
> > + pclk->rm_bit_field[index]);
> > +}
> > +
> > +static void vip_clr_pclk_invert(struct vip_port *port)
> > +{
> > + struct vip_clk_polarity *pclk = port->dev->pclk_pol;
> > + u32 index;
> > +
> > + index = 2 * port->dev->slice_id + port->port_id;
> > + vip_dbg(3, port, "%s: slice%d:port%d -> index: %d\n", __func__,
> > + port->dev->slice_id, port->port_id, index);
> > +
> > + if (pclk->rm_pol)
> > + regmap_update_bits(pclk->rm_pol, pclk->rm_offset,
> > + pclk->rm_bit_field[index], 0);
> > +}
> > +
> > +#define VIP_PARSER_PORT(p) (VIP_PARSER_PORTA_0 + (p * 0x8U))
> > +#define VIP_PARSER_EXTRA_PORT(p) (VIP_PARSER_PORTA_1 + (p * 0x8U))
> > +#define VIP_PARSER_CROP_H_PORT(p) (VIP_PARSER_PORTA_EXTRA4 + (p * 0x10U))
> > +#define VIP_PARSER_CROP_V_PORT(p) (VIP_PARSER_PORTA_EXTRA5 + (p * 0x10U))
> > +#define VIP_PARSER_STOP_IMM_PORT(p) (VIP_PARSER_PORTA_EXTRA6 + (p * 0x4U))
> > +
> > +static void vip_set_data_interface(struct vip_port *port,
> > + enum data_interface_modes mode)
> > +{
> > + u32 val = 0;
> > +
> > + insert_field(&val, mode, VIP_DATA_INTERFACE_MODE_MASK,
> > + VIP_DATA_INTERFACE_MODE_SHFT);
> > +
> > + reg_write(port->dev->parser, VIP_PARSER_MAIN_CFG, val);
> > +}
> > +
> > +static void vip_set_slice_path(struct vip_dev *dev,
> > + enum data_path_select data_path, u32 path_val)
> > +{
> > + u32 val = 0;
> > + int data_path_reg;
> > +
> > + vip_dbg(3, dev, "%s:\n", __func__);
> > +
> > + data_path_reg = VIP_VIP1_DATA_PATH_SELECT + 4 * dev->slice_id;
> > +
> > + switch (data_path) {
> > + case ALL_FIELDS_DATA_SELECT:
> > + val |= path_val;
> > + break;
> > + case VIP_CSC_SRC_DATA_SELECT:
> > + insert_field(&val, path_val, VIP_CSC_SRC_SELECT_MASK,
> > + VIP_CSC_SRC_SELECT_SHFT);
> > + break;
> > + case VIP_SC_SRC_DATA_SELECT:
> > + insert_field(&val, path_val, VIP_SC_SRC_SELECT_MASK,
> > + VIP_SC_SRC_SELECT_SHFT);
> > + break;
> > + case VIP_RGB_SRC_DATA_SELECT:
> > + val |= (path_val) ? VIP_RGB_SRC_SELECT : 0;
> > + break;
> > + case VIP_RGB_OUT_LO_DATA_SELECT:
> > + val |= (path_val) ? VIP_RGB_OUT_LO_SRC_SELECT : 0;
> > + break;
> > + case VIP_RGB_OUT_HI_DATA_SELECT:
> > + val |= (path_val) ? VIP_RGB_OUT_HI_SRC_SELECT : 0;
> > + break;
> > + case VIP_CHR_DS_1_SRC_DATA_SELECT:
> > + insert_field(&val, path_val, VIP_DS1_SRC_SELECT_MASK,
> > + VIP_DS1_SRC_SELECT_SHFT);
> > + break;
> > + case VIP_CHR_DS_2_SRC_DATA_SELECT:
> > + insert_field(&val, path_val, VIP_DS2_SRC_SELECT_MASK,
> > + VIP_DS2_SRC_SELECT_SHFT);
> > + break;
> > + case VIP_MULTI_CHANNEL_DATA_SELECT:
> > + val |= (path_val) ? VIP_MULTI_CHANNEL_SELECT : 0;
> > + break;
> > + case VIP_CHR_DS_1_DATA_BYPASS:
> > + val |= (path_val) ? VIP_DS1_BYPASS : 0;
> > + break;
> > + case VIP_CHR_DS_2_DATA_BYPASS:
> > + val |= (path_val) ? VIP_DS2_BYPASS : 0;
> > + break;
> > + default:
> > + vip_err(dev, "%s: data_path 0x%x is not valid\n",
> > + __func__, data_path);
> > + return;
> > + }
> > + insert_field(&val, data_path, VIP_DATAPATH_SELECT_MASK,
> > + VIP_DATAPATH_SELECT_SHFT);
> > + reg_write(dev, data_path_reg, val);
> > + vip_dbg(3, dev, "%s: DATA_PATH_SELECT(%08X): %08X\n", __func__,
> > + data_path_reg, reg_read(dev, data_path_reg));
> > +}
> > +
> > +/*
> > + * Return the vip_stream structure for a given struct file
> > + */
> > +static inline struct vip_stream *file2stream(struct file *file)
> > +{
> > + return video_drvdata(file);
> > +}
> > +
> > +/*
> > + * Append a destination descriptor to the current descriptor list,
> > + * setting up dma to the given srce.
> > + */
> > +static int add_out_dtd(struct vip_stream *stream, int srce_type)
> > +{
> > + struct vip_port *port = stream->port;
> > + struct vip_dev *dev = port->dev;
> > + struct vip_srce_info *sinfo = &srce_info[srce_type];
> > + struct v4l2_rect *c_rect = &port->c_rect;
> > + struct vip_fmt *fmt = port->fmt;
> > + int channel, plane = 0;
> > + int max_width, max_height;
> > + dma_addr_t dma_addr;
> > + u32 flags;
> > + u32 width = stream->width;
> > +
> > + channel = sinfo->base_channel;
> > +
> > + switch (srce_type) {
> > + case VIP_SRCE_MULT_PORT:
> > + case VIP_SRCE_MULT_ANC:
> > + if (port->port_id == VIP_PORTB)
> > + channel += VIP_CHAN_MULT_PORTB_OFFSET;
> > + channel += stream->stream_id;
> > + flags = 0;
> > + break;
> > + case VIP_SRCE_CHROMA:
> > + plane = 1;
> > + /* fallthrough */
> > + case VIP_SRCE_LUMA:
> > + if (port->port_id == VIP_PORTB) {
> > + if (port->scaler && !port->fmt->coplanar)
> > + /*
> > + * In this case Port A Chroma channel
> > + * is used to carry Port B scaled YUV422
> > + */
> > + channel += 1;
> > + else
> > + channel += VIP_CHAN_YUV_PORTB_OFFSET;
> > + }
> > + flags = port->flags;
> > + break;
> > + case VIP_SRCE_RGB:
> > + if ((port->port_id == VIP_PORTB) ||
> > + ((port->port_id == VIP_PORTA) &&
> > + (port->csc == VIP_CSC_NA) &&
> > + v4l2_is_format_rgb(port->fmt->finfo)))
> > + /*
> > + * RGB sensor only connect to Y_LO
> > + * channel i.e. port B channel.
> > + */
> > + channel += VIP_CHAN_RGB_PORTB_OFFSET;
> > + flags = port->flags;
> > + break;
> > + default:
> > + vip_err(stream, "%s: srce_type 0x%x is not valid\n",
> > + __func__, srce_type);
> > + return -1;
> > + }
> > +
> > + if (dev->slice_id == VIP_SLICE2)
> > + channel += VIP_CHAN_VIP2_OFFSET;
> > +
> > + /* This is just for initialization purposes.
> > + * The actual dma_addr will be configured in vpdma_update_dma_addr
> > + */
> > + dma_addr = 0;
> > +
> > + if (port->fmt->vpdma_fmt[0] == &vpdma_raw_fmts[VPDMA_DATA_FMT_RAW8]) {
> > + /*
> > + * Special case since we are faking a YUV422 16bit format
> > + * to have the vpdma perform the needed byte swap
> > + * we need to adjust the pixel width accordingly
> > + * otherwise the parser will attempt to collect more pixels
> > + * then available and the vpdma transfer will exceed the
> > + * allocated frame buffer.
> > + */
> > + width >>= 1;
> > + vip_dbg(1, stream, "%s: 8 bit raw detected, adjusting width to %d\n",
> > + __func__, width);
> > + }
> > +
> > + /*
> > + * Use VPDMA_MAX_SIZE1 or VPDMA_MAX_SIZE2 register for slice0/1
> > + */
> > +
> > + if (dev->slice_id == VIP_SLICE1) {
> > + vpdma_set_max_size(dev->shared->vpdma, VPDMA_MAX_SIZE1,
> > + width, stream->height);
> > +
> > + max_width = MAX_OUT_WIDTH_REG1;
> > + max_height = MAX_OUT_HEIGHT_REG1;
> > + } else {
> > + vpdma_set_max_size(dev->shared->vpdma, VPDMA_MAX_SIZE2,
> > + width, stream->height);
> > +
> > + max_width = MAX_OUT_WIDTH_REG2;
> > + max_height = MAX_OUT_HEIGHT_REG2;
> > + }
> > +
> > + /*
> > + * Mark this channel to be cleared while cleaning up resources
> > + * This will make sure that an abort descriptor for this channel
> > + * would be submitted to VPDMA causing any ongoing transaction to be
> > + * aborted and cleanup the VPDMA FSM for this channel
> > + */
> > + stream->vpdma_channels[channel] = 1;
> > +
> > + vpdma_rawchan_add_out_dtd(&stream->desc_list, c_rect->width,
> > + stream->bytesperline, c_rect,
> > + fmt->vpdma_fmt[plane], dma_addr,
> > + max_width, max_height, channel, flags);
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * add_stream_dtds - prepares and starts DMA for pending transfers
> > + */
> > +static void add_stream_dtds(struct vip_stream *stream)
> > +{
> > + struct vip_port *port = stream->port;
> > + int srce_type;
> > +
> > + if (port->flags & FLAG_MULT_PORT)
> > + srce_type = VIP_SRCE_MULT_PORT;
> > + else if (port->flags & FLAG_MULT_ANC)
> > + srce_type = VIP_SRCE_MULT_ANC;
> > + else if (v4l2_is_format_rgb(port->fmt->finfo))
> > + srce_type = VIP_SRCE_RGB;
> > + else
> > + srce_type = VIP_SRCE_LUMA;
> > +
> > + add_out_dtd(stream, srce_type);
> > +
> > + if (srce_type == VIP_SRCE_LUMA && port->fmt->coplanar)
> > + add_out_dtd(stream, VIP_SRCE_CHROMA);
> > +}
> > +
> > +#define PARSER_IRQ_MASK (VIP_PORTA_OUTPUT_FIFO_YUV | \
> > + VIP_PORTB_OUTPUT_FIFO_YUV)
> > +
> > +static void enable_irqs(struct vip_dev *dev, int irq_num, int list_num)
> > +{
> > + struct vip_parser_data *parser = dev->parser;
> > + u32 reg_addr = VIP_INT0_ENABLE0_SET +
> > + VIP_INTC_INTX_OFFSET * irq_num;
> > + u32 irq_val = (1 << (list_num * 2)) |
> > + (VIP_VIP1_PARSER_INT << (irq_num * 1));
> > +
> > + /* Enable Parser Interrupt */
> > + reg_write(parser, VIP_PARSER_FIQ_MASK, ~PARSER_IRQ_MASK);
> > +
> > + reg_write(dev->shared, reg_addr, irq_val);
> > +
> > + vpdma_enable_list_complete_irq(dev->shared->vpdma,
> > + irq_num, list_num, true);
> > +}
> > +
> > +static void disable_irqs(struct vip_dev *dev, int irq_num, int list_num)
> > +{
> > + struct vip_parser_data *parser = dev->parser;
> > + u32 reg_addr = VIP_INT0_ENABLE0_CLR +
> > + VIP_INTC_INTX_OFFSET * irq_num;
> > + u32 irq_val = (1 << (list_num * 2)) |
> > + (VIP_VIP1_PARSER_INT << (irq_num * 1));
> > +
> > + /* Disable all Parser Interrupt */
> > + reg_write(parser, VIP_PARSER_FIQ_MASK, 0xffffffff);
> > +
> > + reg_write(dev->shared, reg_addr, irq_val);
> > +
> > + vpdma_enable_list_complete_irq(dev->shared->vpdma,
> > + irq_num, list_num, false);
> > +}
> > +
> > +static void clear_irqs(struct vip_dev *dev, int irq_num, int list_num)
> > +{
> > + struct vip_parser_data *parser = dev->parser;
> > + u32 reg_addr = VIP_INT0_STATUS0_CLR +
> > + VIP_INTC_INTX_OFFSET * irq_num;
> > + u32 irq_val = (1 << (list_num * 2)) |
> > + (VIP_VIP1_PARSER_INT << (irq_num * 1));
> > +
> > + /* Clear all Parser Interrupt */
> > + reg_write(parser, VIP_PARSER_FIQ_CLR, 0xffffffff);
> > + reg_write(parser, VIP_PARSER_FIQ_CLR, 0x0);
> > +
> > + reg_write(dev->shared, reg_addr, irq_val);
> > +
> > + vpdma_clear_list_stat(dev->shared->vpdma, irq_num, dev->slice_id);
> > +}
> > +
> > +static void populate_desc_list(struct vip_stream *stream)
> > +{
> > + struct vip_port *port = stream->port;
> > + struct vip_dev *dev = port->dev;
> > + unsigned int list_length;
> > +
> > + stream->desc_next = stream->desc_list.buf.addr;
> > + add_stream_dtds(stream);
> > +
> > + list_length = stream->desc_next - stream->desc_list.buf.addr;
> > + vpdma_map_desc_buf(dev->shared->vpdma, &stream->desc_list.buf);
> > +}
> > +
> > +/*
> > + * start_dma - adds descriptors to the dma list and submits them.
> > + * Should be called after a new vb is queued and on a vpdma list
> > + * completion interrupt.
> > + */
> > +static void start_dma(struct vip_stream *stream, struct vip_buffer *buf)
> > +{
> > + struct vip_dev *dev = stream->port->dev;
> > + struct vpdma_data *vpdma = dev->shared->vpdma;
> > + int list_num = stream->list_num;
> > + dma_addr_t dma_addr;
> > + int drop_data;
> > +
> > + if (vpdma_list_busy(vpdma, list_num)) {
> > + vip_err(stream, "vpdma list busy, cannot post\n");
> > + return; /* nothing to do */
> > + }
> > +
> > + if (buf) {
> > + dma_addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0);
> > + drop_data = 0;
> > + vip_dbg(4, stream, "%s: vb2 buf idx:%d, dma_addr:%pad\n",
> > + __func__, buf->vb.vb2_buf.index, &dma_addr);
> > + } else {
> > + dma_addr = 0;
> > + drop_data = 1;
> > + vip_dbg(4, stream, "%s: dropped\n", __func__);
> > + }
> > +
> > + vpdma_update_dma_addr(dev->shared->vpdma, &stream->desc_list,
> > + dma_addr, stream->write_desc, drop_data, 0);
> > +
> > + if (stream->port->fmt->coplanar) {
> > + dma_addr += stream->bytesperline * stream->height;
> > + vpdma_update_dma_addr(dev->shared->vpdma, &stream->desc_list,
> > + dma_addr, stream->write_desc + 1,
> > + drop_data, 1);
> > + }
> > +
> > + vpdma_submit_descs(dev->shared->vpdma,
> > + &stream->desc_list, stream->list_num);
> > +}
> > +
> > +static void vip_schedule_next_buffer(struct vip_stream *stream)
> > +{
> > + struct vip_dev *dev = stream->port->dev;
> > + struct vip_buffer *buf;
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(&dev->slock, flags);
> > + if (list_empty(&stream->vidq)) {
> > + vip_dbg(4, stream, "Dropping frame\n");
> > + if (list_empty(&stream->dropq)) {
> > + vip_err(stream, "No dropq buffer left!");
> > + spin_unlock_irqrestore(&dev->slock, flags);
> > + return;
> > + }
> > + buf = list_entry(stream->dropq.next,
> > + struct vip_buffer, list);
> > +
> > + buf->drop = true;
> > + list_move_tail(&buf->list, &stream->post_bufs);
> > + buf = NULL;
> > + } else {
> > + buf = list_entry(stream->vidq.next,
> > + struct vip_buffer, list);
> > + buf->drop = false;
> > + list_move_tail(&buf->list, &stream->post_bufs);
> > + vip_dbg(4, stream, "added next buffer\n");
> > + }
> > +
> > + spin_unlock_irqrestore(&dev->slock, flags);
> > + start_dma(stream, buf);
> > +}
> > +
> > +static void vip_process_buffer_complete(struct vip_stream *stream)
> > +{
> > + struct vip_dev *dev = stream->port->dev;
> > + struct vip_buffer *buf;
> > + struct vb2_v4l2_buffer *vb = NULL;
> > + unsigned long flags, fld;
> > +
> > + buf = list_first_entry(&stream->post_bufs, struct vip_buffer, list);
> > +
> > + if (stream->port->flags & FLAG_INTERLACED) {
> > + vpdma_unmap_desc_buf(dev->shared->vpdma,
> > + &stream->desc_list.buf);
> > +
> > + fld = dtd_get_field(stream->write_desc);
> > + stream->field = fld ? V4L2_FIELD_BOTTOM : V4L2_FIELD_TOP;
> > +
> > + vpdma_map_desc_buf(dev->shared->vpdma, &stream->desc_list.buf);
> > + }
> > +
> > + if (buf) {
> > + vip_dbg(4, stream, "vip buffer complete 0x%x, 0x%x\n",
> > + (unsigned int)buf, buf->drop);
> > +
> > + vb = &buf->vb;
> > + vb->field = stream->field;
> > + vb->sequence = stream->sequence;
> > + vb->vb2_buf.timestamp = ktime_get_ns();
> > +
> > + if (buf->drop) {
> > + spin_lock_irqsave(&dev->slock, flags);
> > + list_move_tail(&buf->list, &stream->dropq);
> > + spin_unlock_irqrestore(&dev->slock, flags);
> > + } else {
> > + spin_lock_irqsave(&dev->slock, flags);
> > + list_del(&buf->list);
> > + spin_unlock_irqrestore(&dev->slock, flags);
> > + vb2_buffer_done(&vb->vb2_buf, VB2_BUF_STATE_DONE);
> > + }
> > + } else {
> > + vip_err(stream, "%s: buf is null!!!\n", __func__);
> > + return;
> > + }
> > +
> > + stream->sequence++;
> > +}
> > +
> > +static int vip_reset_vpdma(struct vip_stream *stream)
> > +{
> > + struct vip_port *port = stream->port;
> > + struct vip_dev *dev = port->dev;
> > + struct vip_buffer *buf;
> > + unsigned long flags;
> > +
> > + stop_dma(stream, false);
> > +
> > + spin_lock_irqsave(&dev->slock, flags);
> > + /* requeue all active buffers in the opposite order */
> > + while (!list_empty(&stream->post_bufs)) {
> > + buf = list_last_entry(&stream->post_bufs,
> > + struct vip_buffer, list);
> > + list_del(&buf->list);
> > + if (buf->drop == 1) {
> > + list_add_tail(&buf->list, &stream->dropq);
> > + vip_dbg(4, stream, "requeueing drop buffer on dropq\n");
> > + } else {
> > + list_add(&buf->list, &stream->vidq);
> > + vip_dbg(4, stream, "requeueing vb2 buf idx:%d on vidq\n",
> > + buf->vb.vb2_buf.index);
> > + }
> > + }
> > + spin_unlock_irqrestore(&dev->slock, flags);
> > +
> > + /* Make sure the desc_list is unmapped */
> > + vpdma_unmap_desc_buf(dev->shared->vpdma, &stream->desc_list.buf);
> > +
> > + return 0;
> > +}
> > +
> > +static void vip_overflow_recovery_work(struct work_struct *work)
>
> This function requires some additional comments about when it should
> be called and what it does. Recovery is always tricky, and so it is
> worthwhile spending additional time on commenting it.
Ok I'll add a comments and also a reference to the related TRM section.
>
> > +{
> > + struct vip_stream *stream = container_of(work, struct vip_stream,
> > + recovery_work);
> > + struct vip_port *port = stream->port;
> > + struct vip_dev *dev = port->dev;
> > +
> > + vip_err(stream, "%s: Port %c\n", __func__,
> > + port->port_id == VIP_PORTA ? 'A' : 'B');
> > +
> > + disable_irqs(dev, dev->slice_id, stream->list_num);
> > + clear_irqs(dev, dev->slice_id, stream->list_num);
> > +
> > + /* 1. Set VIP_XTRA6_PORT_A[31:16] YUV_SRCNUM_STOP_IMMEDIATELY */
> > + /* 2. Set VIP_XTRA6_PORT_A[15:0] ANC_SRCNUM_STOP_IMMEDIATELY */
> > + vip_parser_stop_imm(port, 1);
> > +
> > + /* 3. Clear VIP_PORT_A[8] ENABLE */
> > + /*
> > + * 4. Set VIP_PORT_A[7] CLR_ASYNC_FIFO_RD
> > + * Set VIP_PORT_A[6] CLR_ASYNC_FIFO_WR
> > + */
> > + vip_enable_parser(port, false);
> > +
> > + /* 5. Set VIP_PORT_A[23] SW_RESET */
> > + vip_reset_parser(port, 1);
> > +
> > + /*
> > + * 6. Reset other VIP modules
> > + * For each module used downstream of VIP_PARSER, write 1 to the
> > + * bit location of the VIP_CLKC_RST register which is connected
> > + * to VIP_PARSER
> > + */
> > + vip_module_reset(dev, VIP_DP_RST, true);
> > +
> > + usleep_range(200, 250);
> > +
> > + /*
> > + * 7. Abort VPDMA channels
> > + * Write to list attribute to stop list 0
> > + * Write to list address register location of abort list
> > + * Write to list attribute register list 0 and size of abort list
> > + */
> > + vip_reset_vpdma(stream);
> > +
> > + /* 8. Clear VIP_PORT_A[23] SW_RESET */
> > + vip_reset_parser(port, 0);
> > +
> > + /*
> > + * 9. Un-reset other VIP modules
> > + * For each module used downstream of VIP_PARSER, write 0 to
> > + * the bit location of the VIP_CLKC_RST register which is
> > + * connected to VIP_PARSER
> > + */
> > + vip_module_reset(dev, VIP_DP_RST, false);
> > +
> > + /* 10. (Delay) */
> > + /* 11. SC coeff downloaded (if VIP_SCALER is being used) */
> > + vip_setup_scaler(stream);
> > +
> > + /* 12. (Delay) */
> > + /* the above are not needed here yet */
> > +
> > + populate_desc_list(stream);
> > + stream->num_recovery++;
> > + if (stream->num_recovery < 5) {
> > + /* Reload the vpdma */
> > + vip_load_vpdma_list_fifo(stream);
> > +
> > + enable_irqs(dev, dev->slice_id, stream->list_num);
> > + vip_schedule_next_buffer(stream);
> > +
> > + /* 13. Clear VIP_XTRA6_PORT_A[31:16] YUV_SRCNUM_STOP_IMM */
> > + /* 14. Clear VIP_XTRA6_PORT_A[15:0] ANC_SRCNUM_STOP_IMM */
> > +
> > + vip_parser_stop_imm(port, 0);
> > +
> > + /* 15. Set VIP_PORT_A[8] ENABLE */
> > + /*
> > + * 16. Clear VIP_PORT_A[7] CLR_ASYNC_FIFO_RD
> > + * Clear VIP_PORT_A[6] CLR_ASYNC_FIFO_WR
> > + */
> > + vip_enable_parser(port, true);
> > + } else {
> > + vip_err(stream, "%s: num_recovery limit exceeded leaving disabled\n",
> > + __func__);
> > + }
> > +}
> > +
> > +static void handle_parser_irqs(struct vip_dev *dev)
> > +{
> > + struct vip_parser_data *parser = dev->parser;
> > + struct vip_port *porta = dev->ports[VIP_PORTA];
> > + struct vip_port *portb = dev->ports[VIP_PORTB];
> > + struct vip_stream *stream = NULL;
> > + u32 irq_stat = reg_read(parser, VIP_PARSER_FIQ_STATUS);
> > + int i;
> > +
> > + vip_dbg(3, dev, "%s: FIQ_STATUS: 0x%08x\n", __func__, irq_stat);
> > +
> > + /* Clear all Parser Interrupt */
> > + reg_write(parser, VIP_PARSER_FIQ_CLR, irq_stat);
> > + reg_write(parser, VIP_PARSER_FIQ_CLR, 0x0);
> > +
> > + if (irq_stat & VIP_PORTA_VDET)
> > + vip_dbg(3, dev, "VIP_PORTA_VDET\n");
> > + if (irq_stat & VIP_PORTB_VDET)
> > + vip_dbg(3, dev, "VIP_PORTB_VDET\n");
> > + if (irq_stat & VIP_PORTA_ASYNC_FIFO_OF)
> > + vip_err(dev, "VIP_PORTA_ASYNC_FIFO_OF\n");
> > + if (irq_stat & VIP_PORTB_ASYNC_FIFO_OF)
> > + vip_err(dev, "VIP_PORTB_ASYNC_FIFO_OF\n");
> > + if (irq_stat & VIP_PORTA_OUTPUT_FIFO_YUV)
> > + vip_err(dev, "VIP_PORTA_OUTPUT_FIFO_YUV\n");
> > + if (irq_stat & VIP_PORTA_OUTPUT_FIFO_ANC)
> > + vip_err(dev, "VIP_PORTA_OUTPUT_FIFO_ANC\n");
> > + if (irq_stat & VIP_PORTB_OUTPUT_FIFO_YUV)
> > + vip_err(dev, "VIP_PORTB_OUTPUT_FIFO_YUV\n");
> > + if (irq_stat & VIP_PORTB_OUTPUT_FIFO_ANC)
> > + vip_err(dev, "VIP_PORTB_OUTPUT_FIFO_ANC\n");
> > + if (irq_stat & VIP_PORTA_CONN)
> > + vip_dbg(3, dev, "VIP_PORTA_CONN\n");
> > + if (irq_stat & VIP_PORTA_DISCONN)
> > + vip_dbg(3, dev, "VIP_PORTA_DISCONN\n");
> > + if (irq_stat & VIP_PORTB_CONN)
> > + vip_dbg(3, dev, "VIP_PORTB_CONN\n");
> > + if (irq_stat & VIP_PORTB_DISCONN)
> > + vip_dbg(3, dev, "VIP_PORTB_DISCONN\n");
> > + if (irq_stat & VIP_PORTA_SRC0_SIZE)
> > + vip_dbg(3, dev, "VIP_PORTA_SRC0_SIZE\n");
> > + if (irq_stat & VIP_PORTB_SRC0_SIZE)
> > + vip_dbg(3, dev, "VIP_PORTB_SRC0_SIZE\n");
> > + if (irq_stat & VIP_PORTA_YUV_PROTO_VIOLATION)
> > + vip_dbg(3, dev, "VIP_PORTA_YUV_PROTO_VIOLATION\n");
> > + if (irq_stat & VIP_PORTA_ANC_PROTO_VIOLATION)
> > + vip_dbg(3, dev, "VIP_PORTA_ANC_PROTO_VIOLATION\n");
> > + if (irq_stat & VIP_PORTB_YUV_PROTO_VIOLATION)
> > + vip_dbg(3, dev, "VIP_PORTB_YUV_PROTO_VIOLATION\n");
> > + if (irq_stat & VIP_PORTB_ANC_PROTO_VIOLATION)
> > + vip_dbg(3, dev, "VIP_PORTB_ANC_PROTO_VIOLATION\n");
> > + if (irq_stat & VIP_PORTA_CFG_DISABLE_COMPLETE)
> > + vip_dbg(3, dev, "VIP_PORTA_CFG_DISABLE_COMPLETE\n");
> > + if (irq_stat & VIP_PORTB_CFG_DISABLE_COMPLETE)
> > + vip_dbg(3, dev, "VIP_PORTB_CFG_DISABLE_COMPLETE\n");
> > +
> > + if (irq_stat & (VIP_PORTA_ASYNC_FIFO_OF |
> > + VIP_PORTA_OUTPUT_FIFO_YUV |
> > + VIP_PORTA_OUTPUT_FIFO_ANC)) {
> > + for (i = 0; i < VIP_CAP_STREAMS_PER_PORT; i++) {
> > + if (porta->cap_streams[i] &&
> > + porta->cap_streams[i]->port->port_id ==
> > + porta->port_id) {
> > + stream = porta->cap_streams[i];
> > + break;
> > + }
> > + }
> > + if (stream) {
> > + disable_irqs(dev, dev->slice_id,
> > + stream->list_num);
> > + schedule_work(&stream->recovery_work);
> > + return;
> > + }
> > + }
> > + if (irq_stat & (VIP_PORTB_ASYNC_FIFO_OF |
> > + VIP_PORTB_OUTPUT_FIFO_YUV |
> > + VIP_PORTB_OUTPUT_FIFO_ANC)) {
> > + for (i = 0; i < VIP_CAP_STREAMS_PER_PORT; i++) {
> > + if (portb->cap_streams[i] &&
> > + portb->cap_streams[i]->port->port_id ==
> > + portb->port_id) {
> > + stream = portb->cap_streams[i];
> > + break;
> > + }
> > + }
> > + if (stream) {
> > + disable_irqs(dev, dev->slice_id,
> > + stream->list_num);
> > + schedule_work(&stream->recovery_work);
> > + return;
> > + }
> > + }
> > +}
> > +
> > +static irqreturn_t vip_irq(int irq_vip, void *data)
> > +{
> > + struct vip_dev *dev = (struct vip_dev *)data;
> > + struct vpdma_data *vpdma;
> > + struct vip_stream *stream;
> > + int list_num;
> > + int irq_num = dev->slice_id;
> > + u32 irqst, irqst_saved, reg_addr;
> > +
> > + if (!dev->shared)
> > + return IRQ_HANDLED;
> > +
> > + vpdma = dev->shared->vpdma;
> > + reg_addr = VIP_INT0_STATUS0 +
> > + VIP_INTC_INTX_OFFSET * irq_num;
> > + irqst_saved = reg_read(dev->shared, reg_addr);
> > + irqst = irqst_saved;
> > +
> > + vip_dbg(8, dev, "IRQ %d VIP_INT%d_STATUS0 0x%x\n",
> > + irq_vip, irq_num, irqst);
> > + if (irqst) {
> > + if (irqst & (VIP_VIP1_PARSER_INT << (irq_num * 1))) {
> > + irqst &= ~(VIP_VIP1_PARSER_INT << (irq_num * 1));
> > + handle_parser_irqs(dev);
> > + }
> > +
> > + for (list_num = 0; irqst && (list_num < 8); list_num++) {
> > + /* Check for LIST_COMPLETE IRQ */
> > + if (!(irqst & (1 << list_num * 2)))
> > + continue;
> > +
> > + vip_dbg(8, dev, "IRQ %d: handling LIST%d_COMPLETE\n",
> > + irq_num, list_num);
> > +
> > + stream = vpdma_hwlist_get_priv(vpdma, list_num);
> > + if (!stream || stream->list_num != list_num) {
> > + vip_err(dev, "IRQ occurred for unused list");
> > + continue;
> > + }
> > +
> > + vpdma_clear_list_stat(vpdma, irq_num, list_num);
> > +
> > + vip_process_buffer_complete(stream);
> > +
> > + vip_schedule_next_buffer(stream);
> > +
> > + irqst &= ~((1 << list_num * 2));
> > + }
> > + }
> > +
> > + /* Acknowledge that we are done with all interrupts */
> > + reg_write(dev->shared, VIP_INTC_E0I, 1 << irq_num);
> > +
> > + /* Clear handled events from status register */
> > + reg_addr = VIP_INT0_STATUS0_CLR +
> > + VIP_INTC_INTX_OFFSET * irq_num;
> > + reg_write(dev->shared, reg_addr, irqst_saved);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +/*
> > + * video ioctls
> > + */
> > +static int vip_querycap(struct file *file, void *priv,
> > + struct v4l2_capability *cap)
> > +{
> > + struct vip_stream *stream = file2stream(file);
> > + struct vip_port *port = stream->port;
> > + struct vip_dev *dev = port->dev;
> > +
> > + strscpy(cap->driver, VIP_MODULE_NAME, sizeof(cap->driver));
> > + strscpy(cap->card, VIP_MODULE_NAME, sizeof(cap->card));
> > +
> > + snprintf(cap->bus_info, sizeof(cap->bus_info),
> > + "platform:%s:%s:stream%1d", dev->shared->name, port->name,
> > + stream->stream_id);
> > + return 0;
> > +}
> > +
> > +static int vip_enuminput(struct file *file, void *priv,
> > + struct v4l2_input *inp)
> > +{
> > + struct vip_stream *stream = file2stream(file);
> > +
> > + if (inp->index)
> > + return -EINVAL;
> > +
> > + inp->type = V4L2_INPUT_TYPE_CAMERA;
> > + inp->std = stream->vfd->tvnorms;
> > + snprintf(inp->name, sizeof(inp->name), "camera %u", stream->vfd->num);
> > +
> > + return 0;
> > +}
> > +
> > +static int vip_g_input(struct file *file, void *priv, unsigned int *i)
> > +{
> > + *i = 0;
> > + return 0;
> > +}
> > +
> > +static int vip_s_input(struct file *file, void *priv, unsigned int i)
> > +{
> > + if (i != 0)
> > + return -EINVAL;
> > + return 0;
> > +}
> > +
> > +static int vip_querystd(struct file *file, void *fh, v4l2_std_id *std)
> > +{
> > + struct vip_stream *stream = file2stream(file);
> > + struct vip_port *port = stream->port;
> > +
> > + *std = stream->vfd->tvnorms;
> > + v4l2_subdev_call(port->subdev, video, querystd, std);
> > + vip_dbg(1, stream, "querystd: 0x%lx\n", (unsigned long)*std);
> > + return 0;
> > +}
> > +
> > +static int vip_g_std(struct file *file, void *fh, v4l2_std_id *std)
> > +{
> > + struct vip_stream *stream = file2stream(file);
> > + struct vip_port *port = stream->port;
> > +
> > + *std = stream->vfd->tvnorms;
> > + v4l2_subdev_call(port->subdev, video, g_std_output, std);
>
> g_std_output? Shouldn't this just be g_std? The g_std_output op is for
> video transmitters.
Yes, I'll fix those.
>
> > + vip_dbg(1, stream, "g_std: 0x%lx\n", (unsigned long)*std);
> > +
> > + return 0;
> > +}
> > +
> > +static int vip_s_std(struct file *file, void *fh, v4l2_std_id std)
> > +{
> > + struct vip_stream *stream = file2stream(file);
> > + struct vip_port *port = stream->port;
> > +
> > + vip_dbg(1, stream, "s_std: 0x%lx\n", (unsigned long)std);
> > +
> > + if (!(std & stream->vfd->tvnorms)) {
> > + vip_dbg(1, stream, "s_std after check: 0x%lx\n",
> > + (unsigned long)std);
> > + return -EINVAL;
> > + }
> > +
> > + v4l2_subdev_call(port->subdev, video, s_std_output, std);
>
> Ditto.
Yes, I'll fix those.
>
> > + return 0;
> > +}
> > +
> > +static int vip_enum_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_fmtdesc *f)
> > +{
> > + struct vip_stream *stream = file2stream(file);
> > + struct vip_port *port = stream->port;
> > + struct vip_fmt *fmt;
> > +
> > + vip_dbg(3, stream, "enum_fmt index:%d\n", f->index);
> > + if (f->index >= port->num_active_fmt)
> > + return -EINVAL;
> > +
> > + fmt = port->active_fmt[f->index];
> > +
> > + f->pixelformat = fmt->fourcc;
> > + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>
> No need to set the type field.
Ok.
>
> > + vip_dbg(3, stream, "enum_fmt fourcc:%s\n",
> > + fourcc_to_str(f->pixelformat));
>
> Excessive debugging.
Why excessive?
>
> > +
> > + return 0;
> > +}
> > +
> > +static int vip_enum_framesizes(struct file *file, void *priv,
> > + struct v4l2_frmsizeenum *f)
> > +{
> > + struct vip_stream *stream = file2stream(file);
> > + struct vip_port *port = stream->port;
> > + struct vip_fmt *fmt;
> > + struct v4l2_subdev_frame_size_enum fse;
> > + int ret;
> > +
> > + fmt = find_port_format_by_pix(port, f->pixel_format);
> > + if (!fmt)
> > + return -EINVAL;
> > +
> > + fse.index = f->index;
> > + fse.pad = port->source_pad;
> > + fse.code = fmt->code;
> > + fse.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > + ret = v4l2_subdev_call(port->subdev, pad, enum_frame_size, NULL, &fse);
> > + if (ret == -ENOIOCTLCMD && !f->index) {
> > + /*
> > + * if subdev does not support enum_frame_size
> > + * then use get_fmt
>
> I don't think that's right. If the subdev doesn't support this, then
> this ioctl should be disabled altogether. Typically this ioctl is only
> valid for sensor subdevs, not for video receivers.
>
> Use v4l2_subdev_has_op() and v4l2_disable_ioctl().
You mean to check if the subdev support this ioctl and if not disable it
for the current video device only, correct?
>
> > + */
> > + struct v4l2_subdev_format format = {
> > + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> > + .pad = port->source_pad,
> > + };
> > + ret = v4l2_subdev_call(port->subdev, pad, get_fmt, NULL,
> > + &format);
> > + if (ret)
> > + return ret;
> > +
> > + fse.max_width = format.format.width;
> > + fse.max_height = format.format.height;
> > + } else if (ret) {
> > + return -EINVAL;
> > + }
> > +
> > + vip_dbg(1, stream, "%s: index: %d code: %x W:[%d,%d] H:[%d,%d]\n",
> > + __func__, fse.index, fse.code, fse.min_width, fse.max_width,
> > + fse.min_height, fse.max_height);
> > +
> > + f->type = V4L2_FRMSIZE_TYPE_DISCRETE;
> > + f->discrete.width = fse.max_width;
> > + f->discrete.height = fse.max_height;
> > +
> > + return 0;
> > +}
> > +
> > +static int vip_enum_frameintervals(struct file *file, void *priv,
> > + struct v4l2_frmivalenum *f)
> > +{
> > + struct vip_stream *stream = file2stream(file);
> > + struct vip_port *port = stream->port;
> > + struct vip_fmt *fmt;
> > + struct v4l2_subdev_frame_interval_enum fie = {
> > + .index = f->index,
> > + .width = f->width,
> > + .height = f->height,
> > + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> > + };
> > + int ret;
> > +
> > + fmt = find_port_format_by_pix(port, f->pixel_format);
> > + if (!fmt)
> > + return -EINVAL;
> > +
> > + fie.code = fmt->code;
> > + ret = v4l2_subdev_call(port->subdev, pad, enum_frame_interval,
> > + NULL, &fie);
> > + if (ret)
> > + return ret;
> > + f->type = V4L2_FRMIVAL_TYPE_DISCRETE;
> > + f->discrete = fie.interval;
>
> Same here: disable this ioctl if the subdev doesn't support enum_frame_interval.
>
> > +
> > + return 0;
> > +}
> > +
> > +static int vip_g_parm(struct file *file, void *priv,
> > + struct v4l2_streamparm *parm)
> > +{
> > + struct vip_stream *stream = file2stream(file);
> > + struct vip_port *port = stream->port;
> > +
> > + return v4l2_g_parm_cap(stream->vfd, port->subdev, parm);
> > +}
> > +
> > +static int vip_s_parm(struct file *file, void *priv,
> > + struct v4l2_streamparm *parm)
> > +{
> > + struct vip_stream *stream = file2stream(file);
> > + struct vip_port *port = stream->port;
> > +
> > + return v4l2_s_parm_cap(stream->vfd, port->subdev, parm);
>
> Same here: typically this is not supported for video receivers.
>
> > +}
> > +
> > +static int vip_calc_format_size(struct vip_port *port,
> > + struct vip_fmt *fmt,
> > + struct v4l2_format *f)
> > +{
> > + enum v4l2_field *field;
> > + unsigned int stride;
> > +
> > + if (!fmt) {
> > + vip_dbg(2, port,
> > + "no vip_fmt format provided!\n");
> > + return -EINVAL;
> > + }
> > +
> > + field = &f->fmt.pix.field;
> > + if (*field == V4L2_FIELD_ANY)
> > + *field = V4L2_FIELD_NONE;
> > + else if (V4L2_FIELD_NONE != *field && V4L2_FIELD_ALTERNATE != *field)
> > + return -EINVAL;
> > +
> > + v4l_bound_align_image(&f->fmt.pix.width, MIN_W, MAX_W, W_ALIGN,
> > + &f->fmt.pix.height, MIN_H, MAX_H, H_ALIGN,
> > + S_ALIGN);
> > +
> > + stride = f->fmt.pix.width * (fmt->vpdma_fmt[0]->depth >> 3);
> > + if (stride > f->fmt.pix.bytesperline)
> > + f->fmt.pix.bytesperline = stride;
> > +
> > + f->fmt.pix.bytesperline = clamp_t(u32, f->fmt.pix.bytesperline,
> > + stride, VPDMA_MAX_STRIDE);
> > + f->fmt.pix.bytesperline = ALIGN(f->fmt.pix.bytesperline,
> > + VPDMA_STRIDE_ALIGN);
> > +
> > + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
> > + if (fmt->coplanar) {
> > + f->fmt.pix.sizeimage += f->fmt.pix.height *
> > + f->fmt.pix.bytesperline *
> > + fmt->vpdma_fmt[VIP_CHROMA]->depth >> 3;
> > + }
> > +
> > + f->fmt.pix.colorspace = fmt->colorspace;
> > + f->fmt.pix.priv = 0;
>
> No need to set this.
You mean pix.priv? I thought I remember v4l2-compliance complaining about
something like this?
>
> > +
> > + vip_dbg(3, port, "calc_format_size: fourcc:%s size: %dx%d bpl:%d img_size:%d\n",
> > + fourcc_to_str(f->fmt.pix.pixelformat),
> > + f->fmt.pix.width, f->fmt.pix.height,
> > + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
> > +
> > + return 0;
> > +}
> > +
> > +static inline bool vip_is_size_dma_aligned(u32 bpp, u32 width)
> > +{
> > + return ((width * bpp) == ALIGN(width * bpp, VPDMA_STRIDE_ALIGN));
> > +}
> > +
> > +static int vip_try_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_format *f)
> > +{
> > + struct vip_stream *stream = file2stream(file);
> > + struct vip_port *port = stream->port;
> > + struct v4l2_subdev_frame_size_enum fse;
> > + struct vip_fmt *fmt;
> > + u32 best_width, best_height, largest_width, largest_height;
> > + int ret, found;
> > + enum vip_csc_state csc_direction;
> > +
> > + vip_dbg(3, stream, "try_fmt fourcc:%s size: %dx%d\n",
> > + fourcc_to_str(f->fmt.pix.pixelformat),
> > + f->fmt.pix.width, f->fmt.pix.height);
> > +
> > + fmt = find_port_format_by_pix(port, f->fmt.pix.pixelformat);
> > + if (!fmt) {
> > + vip_dbg(2, stream,
> > + "Fourcc format (0x%08x) not found.\n",
> > + f->fmt.pix.pixelformat);
> > +
> > + /* Just get the first one enumerated */
> > + fmt = port->active_fmt[0];
> > + f->fmt.pix.pixelformat = fmt->fourcc;
> > + }
> > +
> > + csc_direction = vip_csc_direction(fmt->code, fmt->finfo);
> > + if (csc_direction != VIP_CSC_NA) {
> > + if (!is_csc_available(port)) {
> > + vip_dbg(2, stream,
> > + "CSC not available for Fourcc format (0x%08x).\n",
> > + f->fmt.pix.pixelformat);
> > +
> > + /* Just get the first one enumerated */
> > + fmt = port->active_fmt[0];
> > + f->fmt.pix.pixelformat = fmt->fourcc;
> > + /* re-evaluate the csc_direction here */
> > + csc_direction = vip_csc_direction(fmt->code,
> > + fmt->finfo);
> > + } else {
> > + vip_dbg(3, stream, "CSC active on Port %c: going %s\n",
> > + port->port_id == VIP_PORTA ? 'A' : 'B',
> > + (csc_direction == VIP_CSC_Y2R) ? "Y2R" : "R2Y");
> > + }
> > + }
> > +
> > + /*
> > + * Given that sensors might support multiple mbus code we need
> > + * to use the one that matches the requested pixel format
> > + */
> > + port->try_mbus_framefmt = port->mbus_framefmt;
> > + port->try_mbus_framefmt.code = fmt->code;
> > +
> > + /* check for/find a valid width/height */
> > + ret = 0;
> > + found = false;
> > + best_width = 0;
> > + best_height = 0;
> > + largest_width = 0;
> > + largest_height = 0;
> > + fse.pad = port->source_pad;
> > + fse.code = fmt->code;
> > + fse.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > + for (fse.index = 0; ; fse.index++) {
> > + u32 bpp = fmt->vpdma_fmt[0]->depth >> 3;
> > +
> > + ret = v4l2_subdev_call(port->subdev, pad,
> > + enum_frame_size, NULL, &fse);
> > + if (ret == -ENOIOCTLCMD) {
> > + /*
> > + * if subdev does not support enum_frame_size
> > + * then just try to set_fmt directly
> > + */
> > + struct v4l2_subdev_format format = {
> > + .which = V4L2_SUBDEV_FORMAT_TRY,
> > + };
> > + struct v4l2_subdev_pad_config *pad_cfg;
> > +
> > + pad_cfg = v4l2_subdev_alloc_pad_config(port->subdev);
> > + if (!pad_cfg)
> > + return -ENOMEM;
> > +
> > + v4l2_fill_mbus_format(&format.format, &f->fmt.pix,
> > + fmt->code);
> > + ret = v4l2_subdev_call(port->subdev, pad, set_fmt,
> > + pad_cfg, &format);
> > + if (ret)
> > + /* here regardless of the reason we give up */
> > + break;
> > +
> > + if (f->fmt.pix.width == format.format.width &&
> > + f->fmt.pix.height == format.format.height) {
> > + found = true;
> > + vip_dbg(3, stream, "try_fmt loop:%d found direct match: %dx%d\n",
> > + fse.index, format.format.width,
> > + format.format.height);
> > + }
> > + largest_width = format.format.width;
> > + largest_height = format.format.height;
> > + best_width = format.format.width;
> > + best_height = format.format.height;
> > +
> > + v4l2_subdev_free_pad_config(pad_cfg);
> > + break;
> > +
> > + } else if (ret) {
> > + break;
> > + }
> > +
> > + vip_dbg(3, stream, "try_fmt loop:%d fourcc:%s size: %dx%d\n",
> > + fse.index, fourcc_to_str(f->fmt.pix.pixelformat),
> > + fse.max_width, fse.max_height);
> > +
> > + if (!vip_is_size_dma_aligned(bpp, fse.max_width))
> > + continue;
> > +
> > + if ((fse.max_width >= largest_width) &&
> > + (fse.max_height >= largest_height)) {
> > + vip_dbg(3, stream, "try_fmt loop:%d found new larger: %dx%d\n",
> > + fse.index, fse.max_width, fse.max_height);
> > + largest_width = fse.max_width;
> > + largest_height = fse.max_height;
> > + }
> > +
> > + if ((fse.max_width >= f->fmt.pix.width) &&
> > + (fse.max_height >= f->fmt.pix.height)) {
> > + vip_dbg(3, stream, "try_fmt loop:%d found at least larger: %dx%d\n",
> > + fse.index, fse.max_width, fse.max_height);
> > +
> > + if (!best_width ||
> > + ((abs(best_width - f->fmt.pix.width) >=
> > + abs(fse.max_width - f->fmt.pix.width)) &&
> > + (abs(best_height - f->fmt.pix.height) >=
> > + abs(fse.max_height - f->fmt.pix.height)))) {
> > + best_width = fse.max_width;
> > + best_height = fse.max_height;
> > + vip_dbg(3, stream, "try_fmt loop:%d found new best: %dx%d\n",
> > + fse.index, fse.max_width,
> > + fse.max_height);
> > + }
> > + }
> > +
> > + if ((f->fmt.pix.width == fse.max_width) &&
> > + (f->fmt.pix.height == fse.max_height)) {
> > + found = true;
> > + vip_dbg(3, stream, "try_fmt loop:%d found direct match: %dx%d\n",
> > + fse.index, fse.max_width,
> > + fse.max_height);
> > + break;
> > + }
> > +
> > + if ((f->fmt.pix.width >= fse.min_width) &&
> > + (f->fmt.pix.width <= fse.max_width) &&
> > + (f->fmt.pix.height >= fse.min_height) &&
> > + (f->fmt.pix.height <= fse.max_height)) {
> > + found = true;
> > + vip_dbg(3, stream, "try_fmt loop:%d found direct range match: %dx%d\n",
> > + fse.index, fse.max_width,
> > + fse.max_height);
> > + break;
> > + }
> > + }
> > +
> > + if (found) {
> > + port->try_mbus_framefmt.width = f->fmt.pix.width;
> > + port->try_mbus_framefmt.height = f->fmt.pix.height;
> > + /* No need to check for scaling */
> > + goto calc_size;
> > + } else if (largest_width && f->fmt.pix.width > largest_width) {
> > + port->try_mbus_framefmt.width = largest_width;
> > + port->try_mbus_framefmt.height = largest_height;
> > + } else if (best_width) {
> > + port->try_mbus_framefmt.width = best_width;
> > + port->try_mbus_framefmt.height = best_height;
> > + } else {
> > + /* use existing values as default */
> > + }
> > +
> > + vip_dbg(3, stream, "try_fmt best subdev size: %dx%d\n",
> > + port->try_mbus_framefmt.width,
> > + port->try_mbus_framefmt.height);
> > +
> > + if (is_scaler_available(port) &&
> > + csc_direction != VIP_CSC_Y2R &&
> > + !vip_is_mbuscode_raw(fmt->code) &&
> > + f->fmt.pix.height <= port->try_mbus_framefmt.height &&
> > + port->try_mbus_framefmt.height <= SC_MAX_PIXEL_HEIGHT &&
> > + port->try_mbus_framefmt.width <= SC_MAX_PIXEL_WIDTH) {
> > + /*
> > + * Scaler is only accessible if the dst colorspace is YUV.
> > + * As the input to the scaler must be in YUV mode only.
> > + *
> > + * Scaling up is allowed only horizontally.
> > + */
> > + unsigned int hratio, vratio, width_align, height_align;
> > + u32 bpp = fmt->vpdma_fmt[0]->depth >> 3;
> > +
> > + vip_dbg(3, stream, "Scaler active on Port %c: requesting %dx%d\n",
> > + port->port_id == VIP_PORTA ? 'A' : 'B',
> > + f->fmt.pix.width, f->fmt.pix.height);
> > +
> > + /* Just make sure everything is properly aligned */
> > + width_align = ALIGN(f->fmt.pix.width * bpp, VPDMA_STRIDE_ALIGN);
> > + width_align /= bpp;
> > + height_align = ALIGN(f->fmt.pix.height, 2);
> > +
> > + f->fmt.pix.width = width_align;
> > + f->fmt.pix.height = height_align;
> > +
> > + hratio = f->fmt.pix.width * 1000 /
> > + port->try_mbus_framefmt.width;
> > + vratio = f->fmt.pix.height * 1000 /
> > + port->try_mbus_framefmt.height;
> > + if (hratio < 125) {
> > + f->fmt.pix.width = port->try_mbus_framefmt.width / 8;
> > + vip_dbg(3, stream, "Horizontal scaling ratio out of range adjusting -> %d\n",
> > + f->fmt.pix.width);
> > + }
> > +
> > + if (vratio < 188) {
> > + f->fmt.pix.height = port->try_mbus_framefmt.height / 4;
> > + vip_dbg(3, stream, "Vertical scaling ratio out of range adjusting -> %d\n",
> > + f->fmt.pix.height);
> > + }
> > + vip_dbg(3, stream, "Scaler: got %dx%d\n",
> > + f->fmt.pix.width, f->fmt.pix.height);
> > + } else {
> > + /* use existing values as default */
> > + f->fmt.pix.width = port->try_mbus_framefmt.width;
> > + f->fmt.pix.height = port->try_mbus_framefmt.height;
> > + }
> > +
> > +calc_size:
> > + /* That we have a fmt calculate imagesize and bytesperline */
> > + return vip_calc_format_size(port, fmt, f);
> > +}
> > +
> > +static int vip_g_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_format *f)
> > +{
> > + struct vip_stream *stream = file2stream(file);
> > + struct vip_port *port = stream->port;
> > + struct vip_fmt *fmt = port->fmt;
> > +
> > + /* Use last known values or defaults */
> > + f->fmt.pix.width = stream->width;
> > + f->fmt.pix.height = stream->height;
> > + f->fmt.pix.pixelformat = port->fmt->fourcc;
> > + f->fmt.pix.field = stream->sup_field;
> > + f->fmt.pix.colorspace = port->fmt->colorspace;
> > + f->fmt.pix.bytesperline = stream->bytesperline;
> > + f->fmt.pix.sizeimage = stream->sizeimage;
> > +
> > + vip_dbg(3, stream,
> > + "g_fmt fourcc:%s code: %04x size: %dx%d bpl:%d img_size:%d\n",
> > + fourcc_to_str(f->fmt.pix.pixelformat),
> > + fmt->code,
> > + f->fmt.pix.width, f->fmt.pix.height,
> > + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
> > + vip_dbg(3, stream, "g_fmt vpdma data type: 0x%02X\n",
> > + port->fmt->vpdma_fmt[0]->data_type);
> > +
> > + return 0;
> > +}
> > +
> > +static int vip_s_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_format *f)
> > +{
> > + struct vip_stream *stream = file2stream(file);
> > + struct vip_port *port = stream->port;
> > + struct v4l2_subdev_format sfmt;
> > + struct v4l2_mbus_framefmt *mf;
> > + enum vip_csc_state csc_direction;
> > + int ret;
> > +
> > + vip_dbg(3, stream, "s_fmt input fourcc:%s size: %dx%d bpl:%d img_size:%d\n",
> > + fourcc_to_str(f->fmt.pix.pixelformat),
> > + f->fmt.pix.width, f->fmt.pix.height,
> > + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
> > +
> > + ret = vip_try_fmt_vid_cap(file, priv, f);
> > + if (ret)
> > + return ret;
> > +
> > + vip_dbg(3, stream, "s_fmt try_fmt fourcc:%s size: %dx%d bpl:%d img_size:%d\n",
> > + fourcc_to_str(f->fmt.pix.pixelformat),
> > + f->fmt.pix.width, f->fmt.pix.height,
> > + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
> > +
> > + if (vb2_is_busy(&stream->vb_vidq)) {
> > + vip_err(stream, "%s queue busy\n", __func__);
> > + return -EBUSY;
> > + }
> > +
> > + /*
> > + * Check if we need the scaler or not
> > + *
> > + * Since on previous S_FMT call the scaler might have been
> > + * allocated if it is not needed in this instance we will
> > + * attempt to free it just in case.
> > + *
> > + * free_scaler() is harmless unless the current port
> > + * allocated it.
> > + */
> > + if (f->fmt.pix.width == port->try_mbus_framefmt.width &&
> > + f->fmt.pix.height == port->try_mbus_framefmt.height)
> > + free_scaler(port);
> > + else
> > + allocate_scaler(port);
> > +
> > + port->fmt = find_port_format_by_pix(port,
> > + f->fmt.pix.pixelformat);
> > + stream->width = f->fmt.pix.width;
> > + stream->height = f->fmt.pix.height;
> > + stream->bytesperline = f->fmt.pix.bytesperline;
> > + stream->sizeimage = f->fmt.pix.sizeimage;
> > + stream->sup_field = f->fmt.pix.field;
> > + stream->field = f->fmt.pix.field;
> > +
> > + port->c_rect.left = 0;
> > + port->c_rect.top = 0;
> > + port->c_rect.width = stream->width;
> > + port->c_rect.height = stream->height;
> > +
> > + /*
> > + * Check if we need the csc unit or not
> > + *
> > + * Since on previous S_FMT call, the csc might have been
> > + * allocated if it is not needed in this instance we will
> > + * attempt to free it just in case.
> > + *
> > + * free_csc() is harmless unless the current port
> > + * allocated it.
> > + */
> > + csc_direction = vip_csc_direction(port->fmt->code, port->fmt->finfo);
> > + if (csc_direction == VIP_CSC_NA)
> > + free_csc(port);
> > + else
> > + allocate_csc(port, csc_direction);
> > +
> > + if (stream->sup_field == V4L2_FIELD_ALTERNATE)
> > + port->flags |= FLAG_INTERLACED;
> > + else
> > + port->flags &= ~FLAG_INTERLACED;
> > +
> > + vip_dbg(3, stream, "s_fmt fourcc:%s size: %dx%d bpl:%d img_size:%d\n",
> > + fourcc_to_str(f->fmt.pix.pixelformat),
> > + f->fmt.pix.width, f->fmt.pix.height,
> > + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
> > +
> > + mf = &sfmt.format;
> > + v4l2_fill_mbus_format(mf, &f->fmt.pix, port->fmt->code);
> > + /* Make sure to use the subdev size found in the try_fmt */
> > + mf->width = port->try_mbus_framefmt.width;
> > + mf->height = port->try_mbus_framefmt.height;
> > +
> > + vip_dbg(3, stream, "s_fmt pix_to_mbus mbus_code: %04X size: %dx%d\n",
> > + mf->code,
> > + mf->width, mf->height);
> > +
> > + sfmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > + sfmt.pad = port->source_pad;
> > + ret = v4l2_subdev_call(port->subdev, pad, set_fmt, NULL, &sfmt);
> > + if (ret) {
> > + vip_dbg(1, stream, "set_fmt failed in subdev\n");
> > + return ret;
> > + }
> > +
> > + /* Save it */
> > + port->mbus_framefmt = *mf;
> > +
> > + vip_dbg(3, stream, "s_fmt subdev fmt mbus_code: %04X size: %dx%d\n",
> > + port->mbus_framefmt.code,
> > + port->mbus_framefmt.width, port->mbus_framefmt.height);
> > + vip_dbg(3, stream, "s_fmt vpdma data type: 0x%02X\n",
> > + port->fmt->vpdma_fmt[0]->data_type);
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * Does the exact opposite of set_fmt_params
> > + * It makes sure the DataPath register is sane after tear down
> > + */
> > +static void unset_fmt_params(struct vip_stream *stream)
> > +{
> > + struct vip_dev *dev = stream->port->dev;
> > + struct vip_port *port = stream->port;
> > +
> > + stream->sequence = 0;
> > + if (stream->port->flags & FLAG_INTERLACED)
> > + stream->field = V4L2_FIELD_TOP;
> > +
> > + if (port->csc == VIP_CSC_Y2R) {
> > + if (port->port_id == VIP_PORTA) {
> > + vip_set_slice_path(dev, VIP_CSC_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev,
> > + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> > + vip_set_slice_path(dev, VIP_RGB_SRC_DATA_SELECT, 0);
> > + } else {
> > + vip_set_slice_path(dev, VIP_CSC_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev,
> > + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
> > + }
> > + /* We are done */
> > + return;
> > + } else if (port->csc == VIP_CSC_R2Y) {
> > + if (port->scaler && port->fmt->coplanar) {
> > + if (port->port_id == VIP_PORTA) {
> > + vip_set_slice_path(dev,
> > + VIP_CSC_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev,
> > + VIP_SC_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_SRC_DATA_SELECT,
> > + 0);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev,
> > + VIP_RGB_OUT_HI_DATA_SELECT,
> > + 0);
> > + }
> > + } else if (port->scaler) {
> > + if (port->port_id == VIP_PORTA) {
> > + vip_set_slice_path(dev,
> > + VIP_CSC_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev,
> > + VIP_SC_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_SRC_DATA_SELECT,
> > + 0);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev,
> > + VIP_RGB_OUT_HI_DATA_SELECT,
> > + 0);
> > + }
> > + } else if (port->fmt->coplanar) {
> > + if (port->port_id == VIP_PORTA) {
> > + vip_set_slice_path(dev,
> > + VIP_CSC_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_SRC_DATA_SELECT,
> > + 0);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev,
> > + VIP_RGB_OUT_HI_DATA_SELECT,
> > + 0);
> > + }
> > + } else {
> > + if (port->port_id == VIP_PORTA) {
> > + vip_set_slice_path(dev,
> > + VIP_CSC_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_SRC_DATA_SELECT,
> > + 0);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev,
> > + VIP_RGB_OUT_HI_DATA_SELECT,
> > + 0);
> > + }
> > + }
> > + /* We are done */
> > + return;
> > + } else if (v4l2_is_format_rgb(port->fmt->finfo)) {
> > + if (port->port_id == VIP_PORTA) {
> > + vip_set_slice_path(dev,
> > + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
> > + }
> > + /* We are done */
> > + return;
> > + }
> > +
> > + if (port->scaler && port->fmt->coplanar) {
> > + if (port->port_id == VIP_PORTA) {
> > + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> > + } else {
> > + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_2_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
> > + vip_set_slice_path(dev,
> > + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> > + }
> > + } else if (port->scaler) {
> > + if (port->port_id == VIP_PORTA) {
> > + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> > + } else {
> > + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_2_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev, VIP_CHR_DS_2_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> > + }
> > + } else if (port->fmt->coplanar) {
> > + if (port->port_id == VIP_PORTA) {
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> > + } else {
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_2_SRC_DATA_SELECT, 0);
> > + vip_set_slice_path(dev, VIP_CHR_DS_2_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev,
> > + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
> > + }
> > + } else {
> > + /*
> > + * We undo all data path setting except for the multi
> > + * stream case.
> > + * Because we cannot disrupt other on-going capture if only
> > + * one stream is terminated the other might still be going
> > + */
> > + vip_set_slice_path(dev, VIP_MULTI_CHANNEL_DATA_SELECT, 1);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
> > + }
> > +}
> > +
> > +/*
> > + * Set the registers that are modified when the video format changes.
> > + */
> > +static void set_fmt_params(struct vip_stream *stream)
> > +{
>
> Hmm, this is a *very* long function. Perhaps this could be split up a bit,
> or reorganized?
Yeah, I'll start by removing the extra comment lines and reformat it.
>
> > + struct vip_dev *dev = stream->port->dev;
> > + struct vip_port *port = stream->port;
> > +
> > + stream->sequence = 0;
> > + if (stream->port->flags & FLAG_INTERLACED)
> > + stream->field = V4L2_FIELD_TOP;
> > +
> > + if (port->csc == VIP_CSC_Y2R) {
> > + port->flags &= ~FLAG_MULT_PORT;
> > + /* Set alpha component in background color */
> > + vpdma_set_bg_color(dev->shared->vpdma,
> > + (struct vpdma_data_format *)
> > + port->fmt->vpdma_fmt[0],
> > + 0xff);
> > + if (port->port_id == VIP_PORTA) {
> > + /*
> > + * Input A: YUV422
> > + * Output: Y_UP/UV_UP: RGB
> > + * CSC_SRC_SELECT = 1
> > + * RGB_OUT_HI_SELECT = 1
> > + * RGB_SRC_SELECT = 1
> > + * MULTI_CHANNEL_SELECT = 0
>
> It's a bit pointless to comment what the register values should be when you
> set them in the code below. I'd drop that part, it will make the code
> shorter.
Ok.
>
> > + */
> > + vip_set_slice_path(dev, VIP_CSC_SRC_DATA_SELECT, 1);
> > + vip_set_slice_path(dev,
> > + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
>
> For readability purposes I think it is better to keep this on one line. Same for
> the other vip_set_slice_path calls.
Ok.
>
> > + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 1);
> > + vip_set_slice_path(dev, VIP_RGB_SRC_DATA_SELECT, 1);
> > + } else {
> > + /*
> > + * Input B: YUV422
> > + * Output: Y_UP/UV_UP: RGB
> > + * CSC_SRC_SELECT = 2
> > + * RGB_OUT_LO_SELECT = 1
> > + * MULTI_CHANNEL_SELECT = 0
> > + */
> > + vip_set_slice_path(dev, VIP_CSC_SRC_DATA_SELECT, 2);
> > + vip_set_slice_path(dev,
> > + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 1);
> > + }
> > + /* We are done */
> > + return;
> > + } else if (port->csc == VIP_CSC_R2Y) {
> > + port->flags &= ~FLAG_MULT_PORT;
> > + if (port->scaler && port->fmt->coplanar) {
> > + if (port->port_id == VIP_PORTA) {
> > + /*
> > + * Input A: RGB
> > + * Output: Y_UP/UV_UP: Scaled YUV420
> > + * CSC_SRC_SELECT = 4
> > + * SC_SRC_SELECT = 1
> > + * CHR_DS_1_SRC_SELECT = 1
> > + * CHR_DS_1_BYPASS = 0
> > + * RGB_OUT_HI_SELECT = 0
> > + */
> > + vip_set_slice_path(dev,
> > + VIP_CSC_SRC_DATA_SELECT, 4);
> > + vip_set_slice_path(dev,
> > + VIP_SC_SRC_DATA_SELECT, 1);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_SRC_DATA_SELECT,
> > + 1);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev,
> > + VIP_RGB_OUT_HI_DATA_SELECT,
> > + 0);
> > + } else {
> > + vip_err(stream, "RGB sensor can only be on Port A\n");
> > + }
> > + } else if (port->scaler) {
> > + if (port->port_id == VIP_PORTA) {
> > + /*
> > + * Input A: RGB
> > + * Output: Y_UP: Scaled YUV422
> > + * CSC_SRC_SELECT = 4
> > + * SC_SRC_SELECT = 1
> > + * CHR_DS_1_SRC_SELECT = 1
> > + * CHR_DS_1_BYPASS = 1
> > + * RGB_OUT_HI_SELECT = 0
> > + */
> > + vip_set_slice_path(dev,
> > + VIP_CSC_SRC_DATA_SELECT, 4);
> > + vip_set_slice_path(dev,
> > + VIP_SC_SRC_DATA_SELECT, 1);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_SRC_DATA_SELECT,
> > + 1);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_DATA_BYPASS, 1);
> > + vip_set_slice_path(dev,
> > + VIP_RGB_OUT_HI_DATA_SELECT,
> > + 0);
> > + } else {
> > + vip_err(stream, "RGB sensor can only be on Port A\n");
> > + }
> > + } else if (port->fmt->coplanar) {
> > + if (port->port_id == VIP_PORTA) {
> > + /*
> > + * Input A: RGB
> > + * Output: Y_UP/UV_UP: YUV420
> > + * CSC_SRC_SELECT = 4
> > + * CHR_DS_1_SRC_SELECT = 2
> > + * CHR_DS_1_BYPASS = 0
> > + * RGB_OUT_HI_SELECT = 0
> > + */
> > + vip_set_slice_path(dev,
> > + VIP_CSC_SRC_DATA_SELECT, 4);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_SRC_DATA_SELECT,
> > + 2);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev,
> > + VIP_RGB_OUT_HI_DATA_SELECT,
> > + 0);
> > + } else {
> > + vip_err(stream, "RGB sensor can only be on Port A\n");
> > + }
> > + } else {
> > + if (port->port_id == VIP_PORTA) {
> > + /*
> > + * Input A: RGB
> > + * Output: Y_UP/UV_UP: YUV420
> > + * CSC_SRC_SELECT = 4
> > + * CHR_DS_1_SRC_SELECT = 2
> > + * CHR_DS_1_BYPASS = 1
> > + * RGB_OUT_HI_SELECT = 0
> > + */
> > + vip_set_slice_path(dev,
> > + VIP_CSC_SRC_DATA_SELECT, 4);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_SRC_DATA_SELECT,
> > + 2);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_DATA_BYPASS, 1);
> > + vip_set_slice_path(dev,
> > + VIP_RGB_OUT_HI_DATA_SELECT,
> > + 0);
> > + } else {
> > + vip_err(stream, "RGB sensor can only be on Port A\n");
> > + }
> > + }
> > + /* We are done */
> > + return;
> > + } else if (v4l2_is_format_rgb(port->fmt->finfo)) {
> > + port->flags &= ~FLAG_MULT_PORT;
> > + /* Set alpha component in background color */
> > + vpdma_set_bg_color(dev->shared->vpdma,
> > + (struct vpdma_data_format *)
> > + port->fmt->vpdma_fmt[0],
> > + 0xff);
> > + if (port->port_id == VIP_PORTA) {
> > + /*
> > + * Input A: RGB
> > + * Output: Y_LO/UV_LO: RGB
> > + * RGB_OUT_LO_SELECT = 1
> > + * MULTI_CHANNEL_SELECT = 1
> > + */
> > + vip_set_slice_path(dev,
> > + VIP_MULTI_CHANNEL_DATA_SELECT, 1);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 1);
> > + } else {
> > + vip_err(stream, "RGB sensor can only be on Port A\n");
> > + }
> > + /* We are done */
> > + return;
> > + }
> > +
> > + if (port->scaler && port->fmt->coplanar) {
> > + port->flags &= ~FLAG_MULT_PORT;
> > + if (port->port_id == VIP_PORTA) {
> > + /*
> > + * Input A: YUV422
> > + * Output: Y_UP/UV_UP: Scaled YUV420
> > + * SC_SRC_SELECT = 2
> > + * CHR_DS_1_SRC_SELECT = 1
> > + * CHR_DS_1_BYPASS = 0
> > + * RGB_OUT_HI_SELECT = 0
> > + */
> > + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 2);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_SRC_DATA_SELECT, 1);
> > + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> > + } else {
> > + /*
> > + * Input B: YUV422
> > + * Output: Y_LO/UV_LO: Scaled YUV420
> > + * SC_SRC_SELECT = 3
> > + * CHR_DS_2_SRC_SELECT = 1
> > + * RGB_OUT_LO_SELECT = 0
> > + * MULTI_CHANNEL_SELECT = 0
> > + */
> > + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 3);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_2_SRC_DATA_SELECT, 1);
> > + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
> > + vip_set_slice_path(dev,
> > + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> > + }
> > + } else if (port->scaler) {
> > + port->flags &= ~FLAG_MULT_PORT;
> > + if (port->port_id == VIP_PORTA) {
> > + /*
> > + * Input A: YUV422
> > + * Output: Y_UP: Scaled YUV422
> > + * SC_SRC_SELECT = 2
> > + * CHR_DS_1_SRC_SELECT = 1
> > + * CHR_DS_1_BYPASS = 1
> > + * RGB_OUT_HI_SELECT = 0
> > + */
> > + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 2);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_SRC_DATA_SELECT, 1);
> > + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 1);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> > + } else {
> > + /*
> > + * Input B: YUV422
> > + * Output: UV_UP: Scaled YUV422
> > + * SC_SRC_SELECT = 3
> > + * CHR_DS_2_SRC_SELECT = 1
> > + * CHR_DS_1_BYPASS = 1
> > + * CHR_DS_2_BYPASS = 1
> > + * RGB_OUT_HI_SELECT = 0
> > + */
> > + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 3);
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_2_SRC_DATA_SELECT, 1);
> > + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 1);
> > + vip_set_slice_path(dev, VIP_CHR_DS_2_DATA_BYPASS, 1);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> > + }
> > + } else if (port->fmt->coplanar) {
> > + port->flags &= ~FLAG_MULT_PORT;
> > + if (port->port_id == VIP_PORTA) {
> > + /*
> > + * Input A: YUV422
> > + * Output: Y_UP/UV_UP: YUV420
> > + * CHR_DS_1_SRC_SELECT = 3
> > + * CHR_DS_1_BYPASS = 0
> > + * RGB_OUT_HI_SELECT = 0
> > + */
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_1_SRC_DATA_SELECT, 3);
> > + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> > + } else {
> > + /*
> > + * Input B: YUV422
> > + * Output: Y_LO/UV_LO: YUV420
> > + * CHR_DS_2_SRC_SELECT = 4
> > + * CHR_DS_2_BYPASS = 0
> > + * RGB_OUT_LO_SELECT = 0
> > + * MULTI_CHANNEL_SELECT = 0
> > + */
> > + vip_set_slice_path(dev,
> > + VIP_CHR_DS_2_SRC_DATA_SELECT, 4);
> > + vip_set_slice_path(dev, VIP_CHR_DS_2_DATA_BYPASS, 0);
> > + vip_set_slice_path(dev,
> > + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
> > + }
> > + } else {
> > + port->flags |= FLAG_MULT_PORT;
> > + /*
> > + * Input A/B: YUV422
> > + * Output: Y_LO: YUV422 - UV_LO: YUV422
> > + * MULTI_CHANNEL_SELECT = 1
> > + * RGB_OUT_LO_SELECT = 0
> > + */
> > + vip_set_slice_path(dev, VIP_MULTI_CHANNEL_DATA_SELECT, 1);
> > + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
> > + }
> > +}
> > +
> > +static int vip_g_selection(struct file *file, void *fh,
> > + struct v4l2_selection *s)
> > +{
> > + struct vip_stream *stream = file2stream(file);
> > +
> > + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
> > + return -EINVAL;
> > +
> > + switch (s->target) {
> > + case V4L2_SEL_TGT_COMPOSE_DEFAULT:
> > + case V4L2_SEL_TGT_COMPOSE_BOUNDS:
> > + case V4L2_SEL_TGT_CROP_BOUNDS:
> > + case V4L2_SEL_TGT_CROP_DEFAULT:
> > + s->r.left = 0;
> > + s->r.top = 0;
> > + s->r.width = stream->width;
> > + s->r.height = stream->height;
> > + return 0;
> > +
> > + case V4L2_SEL_TGT_COMPOSE:
> > + case V4L2_SEL_TGT_CROP:
> > + s->r = stream->port->c_rect;
> > + return 0;
> > + }
> > +
> > + return -EINVAL;
> > +}
> > +
> > +static int enclosed_rectangle(struct v4l2_rect *a, struct v4l2_rect *b)
> > +{
> > + if (a->left < b->left || a->top < b->top)
> > + return 0;
> > + if (a->left + a->width > b->left + b->width)
> > + return 0;
> > + if (a->top + a->height > b->top + b->height)
> > + return 0;
> > +
> > + return 1;
> > +}
>
> There are helper functions in include/media/v4l2-rect.h, it would make
> sense to add this one to that header.
I'll check that out.
>
> > +
> > +static int vip_s_selection(struct file *file, void *fh,
> > + struct v4l2_selection *s)
> > +{
> > + struct vip_stream *stream = file2stream(file);
> > + struct v4l2_rect r = s->r;
> > +
> > + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
> > + return -EINVAL;
> > +
> > + switch (s->target) {
> > + case V4L2_SEL_TGT_COMPOSE:
> > + case V4L2_SEL_TGT_CROP:
>
> Why both crop and compose when it is the same c_rect? That makes no sense.
Yeah, this is always puzzling to me. When to use which and what not.
I'll catch you on IRC sometime to chat about this.
>
> > + v4l_bound_align_image(&r.width, 0, stream->width, 0,
> > + &r.height, 0, stream->height, 0, 0);
> > +
> > + r.left = clamp_t(unsigned int, r.left, 0,
> > + stream->width - r.width);
> > + r.top = clamp_t(unsigned int, r.top, 0,
> > + stream->height - r.height);
> > +
> > + if (s->flags & V4L2_SEL_FLAG_LE &&
> > + !enclosed_rectangle(&r, &s->r))
> > + return -ERANGE;
> > +
> > + if (s->flags & V4L2_SEL_FLAG_GE &&
> > + !enclosed_rectangle(&s->r, &r))
> > + return -ERANGE;
> > +
> > + s->r = r;
> > + stream->port->c_rect = r;
> > +
> > + vip_dbg(1, stream, "cropped (%d,%d)/%dx%d of %dx%d\n",
> > + r.left, r.top, r.width, r.height,
> > + stream->width, stream->height);
> > +
> > + s->r = stream->port->c_rect;
> > + return 0;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static long vip_ioctl_default(struct file *file, void *fh, bool valid_prio,
> > + unsigned int cmd, void *arg)
> > +{
> > + struct vip_stream *stream = file2stream(file);
> > +
> > + if (!valid_prio) {
> > + vip_err(stream, "%s device busy\n", __func__);
> > + return -EBUSY;
> > + }
> > +
> > + switch (cmd) {
> > + default:
> > + return -ENOTTY;
> > + }
> > +}
>
> Huh?
Yeah, I don't when this was added or for what purpose.
I should probably just remove it.
>
> > +
> > +static const struct v4l2_ioctl_ops vip_ioctl_ops = {
> > + .vidioc_querycap = vip_querycap,
> > + .vidioc_enum_input = vip_enuminput,
> > + .vidioc_g_input = vip_g_input,
> > + .vidioc_s_input = vip_s_input,
> > +
> > + .vidioc_querystd = vip_querystd,
> > + .vidioc_g_std = vip_g_std,
> > + .vidioc_s_std = vip_s_std,
> > +
> > + .vidioc_enum_fmt_vid_cap = vip_enum_fmt_vid_cap,
> > + .vidioc_g_fmt_vid_cap = vip_g_fmt_vid_cap,
> > + .vidioc_try_fmt_vid_cap = vip_try_fmt_vid_cap,
> > + .vidioc_s_fmt_vid_cap = vip_s_fmt_vid_cap,
> > +
> > + .vidioc_enum_frameintervals = vip_enum_frameintervals,
> > + .vidioc_enum_framesizes = vip_enum_framesizes,
> > + .vidioc_s_parm = vip_s_parm,
> > + .vidioc_g_parm = vip_g_parm,
> > + .vidioc_g_selection = vip_g_selection,
> > + .vidioc_s_selection = vip_s_selection,
> > + .vidioc_reqbufs = vb2_ioctl_reqbufs,
> > + .vidioc_create_bufs = vb2_ioctl_create_bufs,
> > + .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
> > + .vidioc_querybuf = vb2_ioctl_querybuf,
> > + .vidioc_qbuf = vb2_ioctl_qbuf,
> > + .vidioc_dqbuf = vb2_ioctl_dqbuf,
> > + .vidioc_expbuf = vb2_ioctl_expbuf,
> > +
> > + .vidioc_streamon = vb2_ioctl_streamon,
> > + .vidioc_streamoff = vb2_ioctl_streamoff,
> > + .vidioc_log_status = v4l2_ctrl_log_status,
> > + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
> > + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> > + .vidioc_default = vip_ioctl_default,
> > +};
> > +
> > +/*
> > + * Videobuf operations
> > + */
> > +static int vip_queue_setup(struct vb2_queue *vq,
> > + unsigned int *nbuffers, unsigned int *nplanes,
> > + unsigned int sizes[], struct device *alloc_devs[])
> > +{
> > + struct vip_stream *stream = vb2_get_drv_priv(vq);
> > + unsigned int size = stream->sizeimage;
> > +
> > + if (vq->num_buffers + *nbuffers < 3)
> > + *nbuffers = 3 - vq->num_buffers;
> > +
> > + if (*nplanes) {
> > + if (sizes[0] < size)
> > + return -EINVAL;
> > + size = sizes[0];
> > + }
> > +
> > + *nplanes = 1;
> > + sizes[0] = size;
> > +
> > + vip_dbg(1, stream, "get %d buffer(s) of size %d each.\n",
> > + *nbuffers, sizes[0]);
> > +
> > + return 0;
> > +}
> > +
> > +static int vip_buf_prepare(struct vb2_buffer *vb)
> > +{
> > + struct vip_stream *stream = vb2_get_drv_priv(vb->vb2_queue);
> > +
> > + if (vb2_plane_size(vb, 0) < stream->sizeimage) {
> > + vip_dbg(1, stream,
> > + "%s data will not fit into plane (%lu < %lu)\n",
> > + __func__, vb2_plane_size(vb, 0),
> > + (long)stream->sizeimage);
> > + return -EINVAL;
> > + }
> > +
> > + vb2_set_plane_payload(vb, 0, stream->sizeimage);
> > +
> > + return 0;
> > +}
> > +
> > +static void vip_buf_queue(struct vb2_buffer *vb)
> > +{
> > + struct vip_stream *stream = vb2_get_drv_priv(vb->vb2_queue);
> > + struct vip_dev *dev = stream->port->dev;
> > + struct vip_buffer *buf = container_of(vb, struct vip_buffer,
> > + vb.vb2_buf);
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(&dev->slock, flags);
> > + list_add_tail(&buf->list, &stream->vidq);
> > + spin_unlock_irqrestore(&dev->slock, flags);
> > +}
> > +
> > +static int vip_setup_scaler(struct vip_stream *stream)
> > +{
> > + struct vip_port *port = stream->port;
> > + struct vip_dev *dev = port->dev;
> > + struct sc_data *sc = dev->sc;
> > + struct csc_data *csc = dev->csc;
> > + struct vpdma_data *vpdma = dev->shared->vpdma;
> > + struct vip_mmr_adb *mmr_adb = port->mmr_adb.addr;
> > + int list_num = stream->list_num;
> > + int timeout = 500;
> > + struct v4l2_format dst_f;
> > + struct v4l2_format src_f;
> > +
> > + memset(&src_f, 0, sizeof(src_f));
> > + src_f.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> > + v4l2_fill_pix_format(&src_f.fmt.pix, &port->mbus_framefmt);
> > + src_f.fmt.pix.pixelformat = vip_mbus_code_to_fourcc(port->fmt->code);
> > +
> > + dst_f = src_f;
> > + dst_f.fmt.pix.pixelformat = port->fmt->fourcc;
> > + dst_f.fmt.pix.width = stream->width;
> > + dst_f.fmt.pix.height = stream->height;
> > +
> > + /* if scaler not associated with this port then skip */
> > + if (port->scaler) {
> > + sc_set_hs_coeffs(sc, port->sc_coeff_h.addr,
> > + port->mbus_framefmt.width,
> > + port->c_rect.width);
> > + sc_set_vs_coeffs(sc, port->sc_coeff_v.addr,
> > + port->mbus_framefmt.height,
> > + port->c_rect.height);
> > + sc_config_scaler(sc, &mmr_adb->sc_regs0[0],
> > + &mmr_adb->sc_regs8[0], &mmr_adb->sc_regs17[0],
> > + port->mbus_framefmt.width,
> > + port->mbus_framefmt.height,
> > + port->c_rect.width,
> > + port->c_rect.height);
> > + port->load_mmrs = true;
> > + }
> > +
> > + /* if csc not associated with this port then skip */
> > + if (port->csc) {
> > + csc_set_coeff(csc, &mmr_adb->csc_regs[0],
> > + &src_f, &dst_f);
> > +
> > + port->load_mmrs = true;
> > + }
> > +
> > + /* If coeff are already loaded then skip */
> > + if (!sc->load_coeff_v && !sc->load_coeff_h && !port->load_mmrs)
> > + return 0;
> > +
> > + if (vpdma_list_busy(vpdma, list_num)) {
> > + vip_dbg(3, stream, "%s: List %d is busy\n",
> > + __func__, list_num);
> > + }
> > +
> > + /* Make sure we start with a clean list */
> > + vpdma_reset_desc_list(&stream->desc_list);
> > +
> > + /* config descriptors */
> > + if (port->load_mmrs) {
> > + vpdma_map_desc_buf(vpdma, &port->mmr_adb);
> > + vpdma_add_cfd_adb(&stream->desc_list, CFD_MMR_CLIENT,
> > + &port->mmr_adb);
> > +
> > + port->load_mmrs = false;
> > + vip_dbg(3, stream, "Added mmr_adb config desc\n");
> > + }
> > +
> > + if (sc->loaded_coeff_h != port->sc_coeff_h.dma_addr ||
> > + sc->load_coeff_h) {
> > + vpdma_map_desc_buf(vpdma, &port->sc_coeff_h);
> > + vpdma_add_cfd_block(&stream->desc_list,
> > + VIP_SLICE1_CFD_SC_CLIENT + dev->slice_id,
> > + &port->sc_coeff_h, 0);
> > +
> > + sc->loaded_coeff_h = port->sc_coeff_h.dma_addr;
> > + sc->load_coeff_h = false;
> > + vip_dbg(3, stream, "Added sc_coeff_h config desc\n");
> > + }
> > +
> > + if (sc->loaded_coeff_v != port->sc_coeff_v.dma_addr ||
> > + sc->load_coeff_v) {
> > + vpdma_map_desc_buf(vpdma, &port->sc_coeff_v);
> > + vpdma_add_cfd_block(&stream->desc_list,
> > + VIP_SLICE1_CFD_SC_CLIENT + dev->slice_id,
> > + &port->sc_coeff_v, SC_COEF_SRAM_SIZE >> 4);
> > +
> > + sc->loaded_coeff_v = port->sc_coeff_v.dma_addr;
> > + sc->load_coeff_v = false;
> > + vip_dbg(3, stream, "Added sc_coeff_v config desc\n");
> > + }
> > + vip_dbg(3, stream, "CFD_SC_CLIENT %d slice_id: %d\n",
> > + VIP_SLICE1_CFD_SC_CLIENT + dev->slice_id, dev->slice_id);
> > +
> > + vpdma_map_desc_buf(vpdma, &stream->desc_list.buf);
> > + vip_dbg(3, stream, "Submitting desc on list# %d\n", list_num);
> > + vpdma_submit_descs(vpdma, &stream->desc_list, list_num);
> > +
> > + while (vpdma_list_busy(vpdma, list_num) && timeout--)
> > + usleep_range(1000, 1100);
> > +
> > + vpdma_unmap_desc_buf(dev->shared->vpdma, &port->mmr_adb);
> > + vpdma_unmap_desc_buf(dev->shared->vpdma, &port->sc_coeff_h);
> > + vpdma_unmap_desc_buf(dev->shared->vpdma, &port->sc_coeff_v);
> > + vpdma_unmap_desc_buf(dev->shared->vpdma, &stream->desc_list.buf);
> > +
> > + vpdma_reset_desc_list(&stream->desc_list);
> > +
> > + if (timeout <= 0) {
> > + vip_err(stream, "Timed out setting up scaler through VPDMA list\n");
> > + return -EBUSY;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int vip_load_vpdma_list_fifo(struct vip_stream *stream)
> > +{
> > + struct vip_port *port = stream->port;
> > + struct vip_dev *dev = port->dev;
> > + struct vpdma_data *vpdma = dev->shared->vpdma;
> > + int list_num = stream->list_num;
> > + struct vip_buffer *buf;
> > + unsigned long flags;
> > + int timeout, i;
> > +
> > + if (vpdma_list_busy(dev->shared->vpdma, stream->list_num))
> > + return -EBUSY;
> > +
> > + for (i = 0; i < VIP_VPDMA_FIFO_SIZE; i++) {
> > + spin_lock_irqsave(&dev->slock, flags);
> > + if (list_empty(&stream->vidq)) {
> > + vip_err(stream, "No buffer left!");
> > + spin_unlock_irqrestore(&dev->slock, flags);
> > + return -EINVAL;
> > + }
> > +
> > + buf = list_entry(stream->vidq.next,
> > + struct vip_buffer, list);
> > + buf->drop = false;
> > +
> > + list_move_tail(&buf->list, &stream->post_bufs);
> > + spin_unlock_irqrestore(&dev->slock, flags);
> > +
> > + vip_dbg(2, stream, "%s: start_dma vb2 buf idx:%d\n",
> > + __func__, buf->vb.vb2_buf.index);
> > + start_dma(stream, buf);
> > +
> > + timeout = 500;
> > + while (vpdma_list_busy(vpdma, list_num) && timeout--)
> > + usleep_range(1000, 1100);
> > +
> > + if (timeout <= 0) {
> > + vip_err(stream, "Timed out loading VPDMA list fifo\n");
> > + return -EBUSY;
> > + }
> > + }
> > + return 0;
> > +}
> > +
> > +static int vip_start_streaming(struct vb2_queue *vq, unsigned int count)
> > +{
> > + struct vip_stream *stream = vb2_get_drv_priv(vq);
> > + struct vip_port *port = stream->port;
> > + struct vip_dev *dev = port->dev;
> > + int ret;
> > +
> > + vip_setup_scaler(stream);
> > +
> > + /*
> > + * Make sure the scaler is configured before the datapath is
> > + * enabled. The scaler can only load the coefficient
> > + * parameters when it is idle. If the scaler path is enabled
> > + * and video data is being received then the VPDMA transfer will
> > + * stall indefinetely.
> > + */
> > + set_fmt_params(stream);
> > + vip_setup_parser(port);
> > +
> > + if (port->subdev) {
> > + ret = v4l2_subdev_call(port->subdev, video, s_stream, 1);
> > + if (ret < 0 && ret != -ENOIOCTLCMD) {
> > + vip_dbg(1, stream, "stream on failed in subdev\n");
>
> On error, all pending buffers need to be returned to vb2 with
> vb2_buffer_done and state VB2_BUF_STATE_QUEUED.
Ah yes missed this.
>
> > + return ret;
> > + }
> > + }
> > +
> > + stream->sequence = 0;
> > + if (stream->port->flags & FLAG_INTERLACED)
> > + stream->field = V4L2_FIELD_TOP;
> > + populate_desc_list(stream);
> > +
> > + ret = vip_load_vpdma_list_fifo(stream);
> > + if (ret)
> > + return ret;
> > +
> > + stream->num_recovery = 0;
> > +
> > + clear_irqs(dev, dev->slice_id, stream->list_num);
> > + enable_irqs(dev, dev->slice_id, stream->list_num);
> > + vip_schedule_next_buffer(stream);
> > + vip_parser_stop_imm(port, false);
> > + vip_enable_parser(port, true);
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * Abort streaming and wait for last buffer
> > + */
> > +static void vip_stop_streaming(struct vb2_queue *vq)
> > +{
> > + struct vip_stream *stream = vb2_get_drv_priv(vq);
> > + struct vip_port *port = stream->port;
> > + struct vip_dev *dev = port->dev;
> > + struct vip_buffer *buf;
> > + int ret;
> > +
> > + vip_dbg(2, stream, "%s:\n", __func__);
> > +
> > + vip_parser_stop_imm(port, true);
> > + vip_enable_parser(port, false);
> > + unset_fmt_params(stream);
> > +
> > + disable_irqs(dev, dev->slice_id, stream->list_num);
> > + clear_irqs(dev, dev->slice_id, stream->list_num);
> > +
> > + if (port->subdev) {
> > + ret = v4l2_subdev_call(port->subdev, video, s_stream, 0);
> > + if (ret < 0 && ret != -ENOIOCTLCMD)
> > + vip_dbg(1, stream, "stream on failed in subdev\n");
> > + }
> > +
> > + stop_dma(stream, true);
> > +
> > + /* release all active buffers */
> > + while (!list_empty(&stream->post_bufs)) {
> > + buf = list_entry(stream->post_bufs.next,
> > + struct vip_buffer, list);
> > + list_del(&buf->list);
> > + if (buf->drop == 1)
> > + list_add_tail(&buf->list, &stream->dropq);
> > + else
> > + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
> > + }
> > + while (!list_empty(&stream->vidq)) {
> > + buf = list_entry(stream->vidq.next, struct vip_buffer, list);
> > + list_del(&buf->list);
> > + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
> > + }
> > +
> > + if (!vb2_is_streaming(vq))
> > + return;
> > +
> > + vpdma_unmap_desc_buf(dev->shared->vpdma, &stream->desc_list.buf);
> > + vpdma_reset_desc_list(&stream->desc_list);
> > +}
> > +
> > +static const struct vb2_ops vip_video_qops = {
> > + .queue_setup = vip_queue_setup,
> > + .buf_prepare = vip_buf_prepare,
> > + .buf_queue = vip_buf_queue,
> > + .start_streaming = vip_start_streaming,
> > + .stop_streaming = vip_stop_streaming,
> > + .wait_prepare = vb2_ops_wait_prepare,
> > + .wait_finish = vb2_ops_wait_finish,
> > +};
> > +
> > +/*
> > + * File operations
> > + */
> > +
> > +static int vip_init_dev(struct vip_dev *dev)
> > +{
> > + if (dev->num_ports != 0)
> > + goto done;
> > +
> > + vip_set_clock_enable(dev, 1);
> > + vip_module_reset(dev, VIP_SC_RST, false);
> > + vip_module_reset(dev, VIP_CSC_RST, false);
> > +done:
> > + dev->num_ports++;
> > +
> > + return 0;
> > +}
> > +
> > +static inline bool is_scaler_available(struct vip_port *port)
> > +{
> > + if (port->endpoint.bus_type == V4L2_MBUS_PARALLEL)
> > + if (port->dev->sc_assigned == VIP_NOT_ASSIGNED ||
> > + port->dev->sc_assigned == port->port_id)
> > + return true;
> > + return false;
> > +}
> > +
> > +static inline bool allocate_scaler(struct vip_port *port)
> > +{
> > + if (is_scaler_available(port)) {
> > + if (port->dev->sc_assigned == VIP_NOT_ASSIGNED ||
> > + port->dev->sc_assigned == port->port_id) {
> > + port->dev->sc_assigned = port->port_id;
> > + port->scaler = true;
> > + return true;
> > + }
> > + }
> > + return false;
> > +}
> > +
> > +static inline void free_scaler(struct vip_port *port)
> > +{
> > + if (port->dev->sc_assigned == port->port_id) {
> > + port->dev->sc_assigned = VIP_NOT_ASSIGNED;
> > + port->scaler = false;
> > + }
> > +}
> > +
> > +static bool is_csc_available(struct vip_port *port)
> > +{
> > + if (port->endpoint.bus_type == V4L2_MBUS_PARALLEL)
> > + if (port->dev->csc_assigned == VIP_NOT_ASSIGNED ||
> > + port->dev->csc_assigned == port->port_id)
> > + return true;
> > + return false;
> > +}
> > +
> > +static bool allocate_csc(struct vip_port *port,
> > + enum vip_csc_state csc_direction)
> > +{
> > + /* Is CSC needed? */
> > + if (csc_direction != VIP_CSC_NA) {
> > + if (is_csc_available(port)) {
> > + port->dev->csc_assigned = port->port_id;
> > + port->csc = csc_direction;
> > + vip_dbg(1, port, "%s: csc allocated: dir: %d\n",
> > + __func__, csc_direction);
> > + return true;
> > + }
> > + }
> > + return false;
> > +}
> > +
> > +static void free_csc(struct vip_port *port)
> > +{
> > + if (port->dev->csc_assigned == port->port_id) {
> > + port->dev->csc_assigned = VIP_NOT_ASSIGNED;
> > + port->csc = VIP_CSC_NA;
> > + vip_dbg(1, port, "%s: csc freed\n",
> > + __func__);
> > + }
> > +}
> > +
> > +static int vip_init_port(struct vip_port *port)
> > +{
> > + int ret;
> > + struct vip_fmt *fmt;
> > + struct v4l2_subdev_format sd_fmt;
> > + struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format;
> > +
> > + if (port->num_streams != 0)
> > + goto done;
> > +
> > + ret = vip_init_dev(port->dev);
> > + if (ret)
> > + goto done;
> > +
> > + /* Get subdevice current frame format */
> > + sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > + sd_fmt.pad = port->source_pad;
> > + ret = v4l2_subdev_call(port->subdev, pad, get_fmt, NULL, &sd_fmt);
> > + if (ret)
> > + vip_dbg(1, port, "init_port get_fmt failed in subdev: (%d)\n",
> > + ret);
> > +
> > + /* try to find one that matches */
> > + fmt = find_port_format_by_code(port, mbus_fmt->code);
> > + if (!fmt) {
> > + vip_dbg(1, port, "subdev default mbus_fmt %04x is not matched.\n",
> > + mbus_fmt->code);
> > + /* if all else fails just pick the first one */
> > + fmt = port->active_fmt[0];
> > +
> > + mbus_fmt->code = fmt->code;
> > + sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > + sd_fmt.pad = port->source_pad;
> > + ret = v4l2_subdev_call(port->subdev, pad, set_fmt,
> > + NULL, &sd_fmt);
> > + if (ret)
> > + vip_dbg(1, port, "init_port set_fmt failed in subdev: (%d)\n",
> > + ret);
> > + }
> > +
> > + /* Assign current format */
> > + port->fmt = fmt;
> > + port->mbus_framefmt = *mbus_fmt;
> > +
> > + vip_dbg(3, port, "%s: g_mbus_fmt subdev mbus_code: %04X fourcc:%s size: %dx%d\n",
> > + __func__, fmt->code,
> > + fourcc_to_str(fmt->fourcc),
> > + mbus_fmt->width, mbus_fmt->height);
> > +
> > + if (mbus_fmt->field == V4L2_FIELD_ALTERNATE)
> > + port->flags |= FLAG_INTERLACED;
> > + else
> > + port->flags &= ~FLAG_INTERLACED;
> > +
> > + port->c_rect.left = 0;
> > + port->c_rect.top = 0;
> > + port->c_rect.width = mbus_fmt->width;
> > + port->c_rect.height = mbus_fmt->height;
> > +
> > + ret = vpdma_alloc_desc_buf(&port->sc_coeff_h, SC_COEF_SRAM_SIZE);
> > + if (ret != 0)
> > + return ret;
> > +
> > + ret = vpdma_alloc_desc_buf(&port->sc_coeff_v, SC_COEF_SRAM_SIZE);
> > + if (ret != 0)
> > + goto free_sc_h;
> > +
> > + ret = vpdma_alloc_desc_buf(&port->mmr_adb, sizeof(struct vip_mmr_adb));
> > + if (ret != 0)
> > + goto free_sc_v;
> > +
> > + init_adb_hdrs(port);
> > +
> > + vip_enable_parser(port, false);
> > +done:
> > + port->num_streams++;
> > + return 0;
> > +
> > +free_sc_v:
> > + vpdma_free_desc_buf(&port->sc_coeff_v);
> > +free_sc_h:
> > + vpdma_free_desc_buf(&port->sc_coeff_h);
> > + return ret;
> > +}
> > +
> > +static int vip_init_stream(struct vip_stream *stream)
> > +{
> > + struct vip_port *port = stream->port;
> > + struct vip_fmt *fmt;
> > + struct v4l2_mbus_framefmt *mbus_fmt;
> > + struct v4l2_format f;
> > + int ret;
> > +
> > + ret = vip_init_port(port);
> > + if (ret != 0)
> > + return ret;
> > +
> > + fmt = port->fmt;
> > + mbus_fmt = &port->mbus_framefmt;
> > +
> > + memset(&f, 0, sizeof(f));
> > +
> > + /* Properly calculate the sizeimage and bytesperline values. */
> > + v4l2_fill_pix_format(&f.fmt.pix, mbus_fmt);
> > + f.fmt.pix.pixelformat = fmt->fourcc;
> > + ret = vip_calc_format_size(port, fmt, &f);
> > + if (ret)
> > + return ret;
> > +
> > + stream->width = f.fmt.pix.width;
> > + stream->height = f.fmt.pix.height;
> > + stream->sup_field = f.fmt.pix.field;
> > + stream->field = f.fmt.pix.field;
> > + stream->bytesperline = f.fmt.pix.bytesperline;
> > + stream->sizeimage = f.fmt.pix.sizeimage;
> > +
> > + vip_dbg(3, stream, "init_stream fourcc:%s size: %dx%d bpl:%d img_size:%d\n",
> > + fourcc_to_str(f.fmt.pix.pixelformat),
> > + f.fmt.pix.width, f.fmt.pix.height,
> > + f.fmt.pix.bytesperline, f.fmt.pix.sizeimage);
> > + vip_dbg(3, stream, "init_stream vpdma data type: 0x%02X\n",
> > + port->fmt->vpdma_fmt[0]->data_type);
> > +
> > + ret = vpdma_create_desc_list(&stream->desc_list, VIP_DESC_LIST_SIZE,
> > + VPDMA_LIST_TYPE_NORMAL);
> > +
> > + if (ret != 0)
> > + return ret;
> > +
> > + stream->write_desc = (struct vpdma_dtd *)stream->desc_list.buf.addr
> > + + 15;
> > +
> > + vip_dbg(1, stream, "%s: stream instance %pa\n",
> > + __func__, &stream);
> > +
> > + return 0;
> > +}
> > +
> > +static void vip_release_dev(struct vip_dev *dev)
> > +{
> > + /*
> > + * On last close, disable clocks to conserve power
> > + */
> > +
> > + if (--dev->num_ports == 0) {
> > + /* reset the scaler module */
> > + vip_module_reset(dev, VIP_SC_RST, true);
> > + vip_module_reset(dev, VIP_CSC_RST, true);
> > + vip_set_clock_enable(dev, 0);
> > + }
> > +}
> > +
> > +static int vip_set_crop_parser(struct vip_port *port)
> > +{
> > + struct vip_dev *dev = port->dev;
> > + struct vip_parser_data *parser = dev->parser;
> > + u32 hcrop = 0, vcrop = 0;
> > + u32 width = port->mbus_framefmt.width;
> > +
> > + if (port->fmt->vpdma_fmt[0] == &vpdma_raw_fmts[VPDMA_DATA_FMT_RAW8]) {
> > + /*
> > + * Special case since we are faking a YUV422 16bit format
> > + * to have the vpdma perform the needed byte swap
> > + * we need to adjust the pixel width accordingly
> > + * otherwise the parser will attempt to collect more pixels
> > + * then available and the vpdma transfer will exceed the
> > + * allocated frame buffer.
> > + */
> > + width >>= 1;
> > + vip_dbg(1, port, "%s: 8 bit raw detected, adjusting width to %d\n",
> > + __func__, width);
> > + }
> > +
> > + /*
> > + * Set Parser Crop parameters to source size otherwise
> > + * scaler and colorspace converter will yield garbage.
> > + */
> > + hcrop = VIP_ACT_BYPASS;
> > + insert_field(&hcrop, 0, VIP_ACT_SKIP_NUMPIX_MASK,
> > + VIP_ACT_SKIP_NUMPIX_SHFT);
> > + insert_field(&hcrop, width,
> > + VIP_ACT_USE_NUMPIX_MASK, VIP_ACT_USE_NUMPIX_SHFT);
> > + reg_write(parser, VIP_PARSER_CROP_H_PORT(port->port_id), hcrop);
> > +
> > + insert_field(&vcrop, 0, VIP_ACT_SKIP_NUMLINES_MASK,
> > + VIP_ACT_SKIP_NUMLINES_SHFT);
> > + insert_field(&vcrop, port->mbus_framefmt.height,
> > + VIP_ACT_USE_NUMLINES_MASK, VIP_ACT_USE_NUMLINES_SHFT);
> > + reg_write(parser, VIP_PARSER_CROP_V_PORT(port->port_id), vcrop);
> > +
> > + return 0;
> > +}
> > +
> > +static int vip_setup_parser(struct vip_port *port)
> > +{
> > + struct vip_dev *dev = port->dev;
> > + struct vip_parser_data *parser = dev->parser;
> > + struct v4l2_fwnode_endpoint *endpoint = &port->endpoint;
> > + struct vip_bt656_bus *bt656_ep = &port->bt656_endpoint;
> > + int iface, sync_type;
> > + u32 flags = 0, config0;
> > +
> > + /* Reset the port */
> > + vip_reset_parser(port, true);
> > + usleep_range(200, 250);
> > + vip_reset_parser(port, false);
> > +
> > + config0 = reg_read(parser, VIP_PARSER_PORT(port->port_id));
> > +
> > + switch (endpoint->bus.parallel.bus_width) {
> > + case 24:
> > + iface = SINGLE_24B_INTERFACE;
> > + break;
> > + case 16:
> > + iface = SINGLE_16B_INTERFACE;
> > + break;
> > + case 8:
> > + default:
> > + iface = DUAL_8B_INTERFACE;
> > + }
> > +
> > + if (endpoint->bus_type == V4L2_MBUS_BT656) {
> > + flags = endpoint->bus.parallel.flags;
> > +
> > + /*
> > + * Ideally, this should come from subdev
> > + * port->fmt can be anything once CSC is enabled
> > + */
> > + if (vip_is_mbuscode_rgb(port->fmt->code)) {
> > + sync_type = EMBEDDED_SYNC_SINGLE_RGB_OR_YUV444;
> > + } else {
> > + switch (bt656_ep->num_channels) {
> > + case 4:
> > + sync_type = EMBEDDED_SYNC_4X_MULTIPLEXED_YUV422;
> > + break;
> > + case 2:
> > + sync_type = EMBEDDED_SYNC_2X_MULTIPLEXED_YUV422;
> > + break;
> > + case 1:
> > + sync_type = EMBEDDED_SYNC_SINGLE_YUV422;
> > + break;
> > + default:
> > + sync_type =
> > + EMBEDDED_SYNC_LINE_MULTIPLEXED_YUV422;
> > + }
> > + if (bt656_ep->pixmux == 0)
> > + sync_type =
> > + EMBEDDED_SYNC_LINE_MULTIPLEXED_YUV422;
> > + }
> > +
> > + } else if (endpoint->bus_type == V4L2_MBUS_PARALLEL) {
> > + flags = endpoint->bus.parallel.flags;
> > +
> > + if (vip_is_mbuscode_rgb(port->fmt->code))
> > + sync_type = DISCRETE_SYNC_SINGLE_RGB_24B;
> > + else
> > + sync_type = DISCRETE_SYNC_SINGLE_YUV422;
> > +
> > + if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
> > + config0 |= VIP_HSYNC_POLARITY;
> > + else if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
> > + config0 &= ~VIP_HSYNC_POLARITY;
> > +
> > + if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
> > + config0 |= VIP_VSYNC_POLARITY;
> > + else if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
> > + config0 &= ~VIP_VSYNC_POLARITY;
> > +
> > + config0 &= ~VIP_USE_ACTVID_HSYNC_ONLY;
> > + config0 |= VIP_ACTVID_POLARITY;
> > + config0 |= VIP_DISCRETE_BASIC_MODE;
> > +
> > + } else {
> > + vip_err(port, "Device doesn't support CSI2");
> > + return -EINVAL;
> > + }
> > +
> > + if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) {
> > + vip_set_pclk_invert(port);
> > + config0 |= VIP_PIXCLK_EDGE_POLARITY;
> > + } else {
> > + vip_clr_pclk_invert(port);
> > + config0 &= ~VIP_PIXCLK_EDGE_POLARITY;
> > + }
> > +
> > + config0 |= ((sync_type & VIP_SYNC_TYPE_MASK) << VIP_SYNC_TYPE_SHFT);
> > +
> > + reg_write(parser, VIP_PARSER_PORT(port->port_id), config0);
> > +
> > + vip_set_data_interface(port, iface);
> > + vip_set_crop_parser(port);
> > +
> > + return 0;
> > +}
> > +
> > +static void vip_enable_parser(struct vip_port *port, bool on)
> > +{
> > + u32 config0;
> > + struct vip_dev *dev = port->dev;
> > + struct vip_parser_data *parser = dev->parser;
> > +
> > + config0 = reg_read(parser, VIP_PARSER_PORT(port->port_id));
> > +
> > + if (on) {
> > + config0 |= VIP_PORT_ENABLE;
> > + config0 &= ~(VIP_ASYNC_FIFO_RD | VIP_ASYNC_FIFO_WR);
> > + } else {
> > + config0 &= ~VIP_PORT_ENABLE;
> > + config0 |= (VIP_ASYNC_FIFO_RD | VIP_ASYNC_FIFO_WR);
> > + }
> > + reg_write(parser, VIP_PARSER_PORT(port->port_id), config0);
> > +}
> > +
> > +static void vip_reset_parser(struct vip_port *port, bool on)
> > +{
> > + u32 config0;
> > + struct vip_dev *dev = port->dev;
> > + struct vip_parser_data *parser = dev->parser;
> > +
> > + config0 = reg_read(parser, VIP_PARSER_PORT(port->port_id));
> > +
> > + if (on)
> > + config0 |= VIP_SW_RESET;
> > + else
> > + config0 &= ~VIP_SW_RESET;
> > +
> > + reg_write(parser, VIP_PARSER_PORT(port->port_id), config0);
> > +}
> > +
> > +static void vip_parser_stop_imm(struct vip_port *port, bool on)
> > +{
> > + u32 config0;
> > + struct vip_dev *dev = port->dev;
> > + struct vip_parser_data *parser = dev->parser;
> > +
> > + config0 = reg_read(parser, VIP_PARSER_STOP_IMM_PORT(port->port_id));
> > +
> > + if (on)
> > + config0 = 0xffffffff;
> > + else
> > + config0 = 0;
> > +
> > + reg_write(parser, VIP_PARSER_STOP_IMM_PORT(port->port_id), config0);
> > +}
> > +
> > +static void vip_release_stream(struct vip_stream *stream)
> > +{
> > + struct vip_dev *dev = stream->port->dev;
> > +
> > + vip_dbg(1, stream, "%s: stream instance %pa\n",
> > + __func__, &stream);
> > +
> > + vpdma_unmap_desc_buf(dev->shared->vpdma, &stream->desc_list.buf);
> > + vpdma_free_desc_buf(&stream->desc_list.buf);
> > + vpdma_free_desc_list(&stream->desc_list);
> > +}
> > +
> > +static void vip_release_port(struct vip_port *port)
> > +{
> > + vip_dbg(1, port, "%s: port instance %pa\n",
> > + __func__, &port);
> > +
> > + vpdma_free_desc_buf(&port->mmr_adb);
> > + vpdma_free_desc_buf(&port->sc_coeff_h);
> > + vpdma_free_desc_buf(&port->sc_coeff_v);
> > +}
> > +
> > +static void stop_dma(struct vip_stream *stream, bool clear_list)
> > +{
> > + struct vip_dev *dev = stream->port->dev;
> > + int ch, size = 0;
> > +
> > + /* Create a list of channels to be cleared */
> > + for (ch = 0; ch < VPDMA_MAX_CHANNELS; ch++) {
> > + if (stream->vpdma_channels[ch] == 1) {
> > + stream->vpdma_channels_to_abort[size++] = ch;
> > + vip_dbg(2, stream, "Clear channel no: %d\n", ch);
> > + }
> > + }
> > +
> > + /* Clear all the used channels for the list */
> > + vpdma_list_cleanup(dev->shared->vpdma, stream->list_num,
> > + stream->vpdma_channels_to_abort, size);
> > +
> > + if (clear_list)
> > + for (ch = 0; ch < VPDMA_MAX_CHANNELS; ch++)
> > + stream->vpdma_channels[ch] = 0;
> > +}
> > +
> > +static int vip_open(struct file *file)
> > +{
> > + struct vip_stream *stream = video_drvdata(file);
> > + struct vip_port *port = stream->port;
> > + struct vip_dev *dev = port->dev;
> > + int ret = 0;
> > +
> > + vip_dbg(2, stream, "%s\n", __func__);
> > +
> > + mutex_lock(&dev->mutex);
> > +
> > + ret = v4l2_fh_open(file);
> > + if (ret) {
> > + vip_err(stream, "v4l2_fh_open failed\n");
> > + goto unlock;
> > + }
> > +
> > + /*
> > + * If this is the first open file.
> > + * Then initialize hw module.
> > + */
> > + if (!v4l2_fh_is_singular_file(file))
> > + goto unlock;
> > +
> > + if (vip_init_stream(stream))
> > + ret = -ENODEV;
> > +unlock:
> > + mutex_unlock(&dev->mutex);
> > + return ret;
> > +}
> > +
> > +static int vip_release(struct file *file)
> > +{
> > + struct vip_stream *stream = video_drvdata(file);
> > + struct vip_port *port = stream->port;
> > + struct vip_dev *dev = port->dev;
> > + bool fh_singular;
> > + int ret;
> > +
> > + vip_dbg(2, stream, "%s\n", __func__);
> > +
> > + mutex_lock(&dev->mutex);
> > +
> > + /* Save the singular status before we call the clean-up helper */
> > + fh_singular = v4l2_fh_is_singular_file(file);
> > +
> > + /* the release helper will cleanup any on-going streaming */
> > + ret = _vb2_fop_release(file, NULL);
> > +
> > + free_csc(port);
> > + free_scaler(port);
> > +
> > + /*
> > + * If this is the last open file.
> > + * Then de-initialize hw module.
> > + */
> > + if (fh_singular) {
> > + vip_release_stream(stream);
> > +
> > + if (--port->num_streams == 0) {
> > + vip_release_port(port);
> > + vip_release_dev(port->dev);
> > + }
> > + }
> > +
> > + mutex_unlock(&dev->mutex);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct v4l2_file_operations vip_fops = {
> > + .owner = THIS_MODULE,
> > + .open = vip_open,
> > + .release = vip_release,
> > + .read = vb2_fop_read,
> > + .poll = vb2_fop_poll,
> > + .unlocked_ioctl = video_ioctl2,
> > + .mmap = vb2_fop_mmap,
> > +};
> > +
> > +static struct video_device vip_videodev = {
> > + .name = VIP_MODULE_NAME,
> > + .fops = &vip_fops,
> > + .ioctl_ops = &vip_ioctl_ops,
> > + .minor = -1,
> > + .release = video_device_release,
> > + .tvnorms = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM,
> > + .device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE |
> > + V4L2_CAP_READWRITE,
> > +};
> > +
> > +static int alloc_stream(struct vip_port *port, int stream_id, int vfl_type)
> > +{
> > + struct vip_stream *stream;
> > + struct vip_dev *dev = port->dev;
> > + struct vb2_queue *q;
> > + struct video_device *vfd;
> > + struct vip_buffer *buf;
> > + struct list_head *pos, *tmp;
> > + int ret, i;
> > +
> > + stream = kzalloc(sizeof(*stream), GFP_KERNEL);
> > + if (!stream)
> > + return -ENOMEM;
> > +
> > + stream->port = port;
> > + stream->stream_id = stream_id;
> > + stream->vfl_type = vfl_type;
> > + port->cap_streams[stream_id] = stream;
> > +
> > + snprintf(stream->name, sizeof(stream->name), "%s-%d",
> > + port->name, stream_id);
> > +
> > + stream->list_num = vpdma_hwlist_alloc(dev->shared->vpdma, stream);
> > + if (stream->list_num < 0) {
> > + vip_err(stream, "Could not get VPDMA hwlist");
> > + ret = -ENODEV;
> > + goto do_free_stream;
> > + }
> > +
> > + INIT_LIST_HEAD(&stream->post_bufs);
> > +
> > + /*
> > + * Initialize queue
> > + */
> > + q = &stream->vb_vidq;
> > + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> > + q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
> > + q->drv_priv = stream;
> > + q->buf_struct_size = sizeof(struct vip_buffer);
> > + q->ops = &vip_video_qops;
> > + q->mem_ops = &vb2_dma_contig_memops;
> > + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> > + q->lock = &dev->mutex;
> > + q->min_buffers_needed = 3;
> > + q->dev = dev->v4l2_dev->dev;
> > +
> > + ret = vb2_queue_init(q);
> > + if (ret)
> > + goto do_free_hwlist;
> > +
> > + INIT_WORK(&stream->recovery_work, vip_overflow_recovery_work);
> > +
> > + INIT_LIST_HEAD(&stream->vidq);
> > +
> > + /* Allocate/populate Drop queue entries */
> > + INIT_LIST_HEAD(&stream->dropq);
> > + for (i = 0; i < VIP_DROPQ_SIZE; i++) {
> > + buf = kzalloc(sizeof(*buf), GFP_ATOMIC);
> > + if (!buf) {
> > + ret = -ENOMEM;
> > + goto do_free_dropq;
> > + }
> > + buf->drop = true;
> > + list_add(&buf->list, &stream->dropq);
> > + }
> > +
> > + vfd = video_device_alloc();
> > + if (!vfd)
> > + goto do_free_dropq;
> > + *vfd = vip_videodev;
> > + vfd->v4l2_dev = dev->v4l2_dev;
> > + vfd->queue = q;
> > +
> > + vfd->lock = &dev->mutex;
> > + video_set_drvdata(vfd, stream);
> > +
> > + ret = video_register_device(vfd, vfl_type, -1);
> > + if (ret) {
> > + vip_err(stream, "Failed to register video device\n");
> > + goto do_free_vfd;
> > + }
> > +
> > + stream->vfd = vfd;
>
> Shouldn't this be done before the call to video_register_device()?
Yep most likely.
>
> > +
> > + vip_info(stream, "device registered as %s\n",
> > + video_device_node_name(vfd));
> > + return 0;
> > +
> > +do_free_vfd:
> > + video_device_release(vfd);
> > +do_free_dropq:
> > + list_for_each_safe(pos, tmp, &stream->dropq) {
> > + buf = list_entry(pos,
> > + struct vip_buffer, list);
> > + vip_dbg(1, dev, "dropq buffer\n");
> > + list_del(pos);
> > + kfree(buf);
> > + }
> > +do_free_hwlist:
> > + vpdma_hwlist_release(dev->shared->vpdma, stream->list_num);
> > +do_free_stream:
> > + kfree(stream);
> > + return ret;
> > +}
> > +
> > +static void free_stream(struct vip_stream *stream)
> > +{
> > + struct vip_dev *dev;
> > + struct vip_buffer *buf;
> > + struct list_head *pos, *q;
> > +
> > + if (!stream)
> > + return;
> > +
> > + dev = stream->port->dev;
> > + /* Free up the Drop queue */
> > + list_for_each_safe(pos, q, &stream->dropq) {
> > + buf = list_entry(pos,
> > + struct vip_buffer, list);
> > + vip_dbg(1, stream, "dropq buffer\n");
> > + list_del(pos);
> > + kfree(buf);
> > + }
> > +
> > + video_unregister_device(stream->vfd);
> > + vpdma_hwlist_release(dev->shared->vpdma, stream->list_num);
> > + stream->port->cap_streams[stream->stream_id] = NULL;
> > + kfree(stream);
> > +}
> > +
> > +static int get_subdev_active_format(struct vip_port *port,
> > + struct v4l2_subdev *subdev)
> > +{
> > + struct vip_fmt *fmt;
> > + struct v4l2_subdev_mbus_code_enum mbus_code;
> > + int ret = 0;
> > + unsigned int k, i, j;
> > + enum vip_csc_state csc;
> > +
> > + /* Enumerate sub device formats and enable all matching local formats */
> > + port->num_active_fmt = 0;
> > + for (k = 0, i = 0; (ret != -EINVAL); k++) {
> > + memset(&mbus_code, 0, sizeof(mbus_code));
> > + mbus_code.index = k;
> > + mbus_code.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > + ret = v4l2_subdev_call(subdev, pad, enum_mbus_code,
> > + NULL, &mbus_code);
> > + if (ret)
> > + continue;
> > +
> > + vip_dbg(2, port,
> > + "subdev %s: code: %04x idx: %d\n",
> > + subdev->name, mbus_code.code, k);
> > +
> > + for (j = 0; j < ARRAY_SIZE(vip_formats); j++) {
> > + fmt = &vip_formats[j];
> > + if (mbus_code.code != fmt->code)
> > + continue;
> > +
> > + /*
> > + * When the port is configured for BT656
> > + * then none of the downstream unit can be used.
> > + * So here we need to skip all format requiring
> > + * either CSC or CHR_DS
> > + */
> > + csc = vip_csc_direction(fmt->code, fmt->finfo);
> > + if (port->endpoint.bus_type == V4L2_MBUS_BT656 &&
> > + (csc != VIP_CSC_NA || fmt->coplanar))
> > + continue;
> > +
> > + port->active_fmt[i] = fmt;
> > + vip_dbg(2, port,
> > + "matched fourcc: %s: code: %04x idx: %d\n",
> > + fourcc_to_str(fmt->fourcc), fmt->code, i);
> > + port->num_active_fmt = ++i;
> > + }
> > + }
> > +
> > + if (i == 0) {
> > + vip_err(port, "No suitable format reported by subdev %s\n",
> > + subdev->name);
> > + return -EINVAL;
> > + }
> > + return 0;
> > +}
> > +
> > +static int alloc_port(struct vip_dev *dev, int id, const char *name)
> > +{
> > + struct vip_port *port;
> > +
> > + if (dev->ports[id])
> > + return -EINVAL;
> > +
> > + port = devm_kzalloc(&dev->pdev->dev, sizeof(*port), GFP_KERNEL);
> > + if (!port)
> > + return -ENOMEM;
> > +
> > + dev->ports[id] = port;
> > + port->dev = dev;
> > + port->port_id = id;
> > + port->name = name;
> > + port->num_streams = 0;
> > + return 0;
> > +}
> > +
> > +static void free_port(struct vip_port *port)
> > +{
> > + if (!port)
> > + return;
> > +
> > + v4l2_async_notifier_unregister(&port->notifier);
> > + v4l2_async_notifier_cleanup(&port->notifier);
> > + free_stream(port->cap_streams[0]);
> > +}
> > +
> > +static int get_field(u32 value, u32 mask, int shift)
> > +{
> > + return (value & (mask << shift)) >> shift;
> > +}
> > +
> > +static int vip_probe_complete(struct platform_device *pdev);
> > +static void vip_vpdma_fw_cb(struct platform_device *pdev)
> > +{
> > + dev_info(&pdev->dev, "VPDMA firmware loaded\n");
> > +
> > + if (pdev->dev.of_node)
> > + vip_probe_complete(pdev);
> > +}
> > +
> > +static int vip_create_streams(struct vip_port *port,
> > + struct v4l2_subdev *subdev)
> > +{
> > + struct v4l2_fwnode_bus_parallel *bus;
> > + struct vip_bt656_bus *bt656_ep;
> > + int i;
> > +
> > + for (i = 0; i < VIP_CAP_STREAMS_PER_PORT; i++)
> > + free_stream(port->cap_streams[i]);
> > +
> > + if (get_subdev_active_format(port, subdev))
> > + return -ENODEV;
> > +
> > + port->subdev = subdev;
> > +
> > + if (port->endpoint.bus_type == V4L2_MBUS_PARALLEL) {
> > + port->flags |= FLAG_MULT_PORT;
> > + port->num_streams_configured = 1;
> > + alloc_stream(port, 0, VFL_TYPE_VIDEO);
> > + } else if (port->endpoint.bus_type == V4L2_MBUS_BT656) {
> > + port->flags |= FLAG_MULT_PORT;
> > + bus = &port->endpoint.bus.parallel;
> > + bt656_ep = &port->bt656_endpoint;
> > + port->num_streams_configured = bt656_ep->num_channels;
> > + for (i = 0; i < bt656_ep->num_channels; i++) {
> > + if (bt656_ep->channels[i] >= 16)
> > + continue;
> > + alloc_stream(port, bt656_ep->channels[i],
> > + VFL_TYPE_VIDEO);
> > + }
> > + }
> > + return 0;
> > +}
> > +
> > +static int vip_async_bound(struct v4l2_async_notifier *notifier,
> > + struct v4l2_subdev *subdev,
> > + struct v4l2_async_subdev *asd)
> > +{
> > + struct vip_port *port = notifier_to_vip_port(notifier);
> > + int ret;
> > +
> > + vip_dbg(1, port, "%s\n", __func__);
> > +
> > + if (port->subdev) {
> > + vip_info(port, "Rejecting subdev %s (Already set!!)",
> > + subdev->name);
> > + return 0;
> > + }
> > +
> > + vip_info(port, "Port %c: Using subdev %s for capture\n",
> > + port->port_id == VIP_PORTA ? 'A' : 'B', subdev->name);
> > +
> > + ret = vip_find_pad(subdev, MEDIA_PAD_FL_SOURCE);
> > + if (ret < 0)
> > + return ret;
> > + port->source_pad = ret;
> > + vip_dbg(1, port, "subdev source_pad: %d\n", port->source_pad);
> > +
> > + ret = vip_create_streams(port, subdev);
> > + if (ret)
> > + return ret;
> > +
> > + return 0;
> > +}
> > +
> > +static int vip_async_complete(struct v4l2_async_notifier *notifier)
> > +{
> > + struct vip_port *port = notifier_to_vip_port(notifier);
> > +
> > + vip_dbg(1, port, "%s\n", __func__);
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_async_notifier_operations vip_async_ops = {
> > + .bound = vip_async_bound,
> > + .complete = vip_async_complete,
> > +};
> > +
> > +static struct fwnode_handle *
> > +fwnode_graph_get_next_endpoint_by_regs(const struct fwnode_handle *fwnode,
> > + int port_reg, int reg)
> > +{
> > + return of_fwnode_handle(of_graph_get_endpoint_by_regs(to_of_node(fwnode),
> > + port_reg, reg));
> > +}
> > +
> > +static int vip_register_subdev_notif(struct vip_port *port,
> > + struct fwnode_handle *ep)
> > +{
> > + struct v4l2_async_notifier *notifier = &port->notifier;
> > + struct vip_dev *dev = port->dev;
> > + struct fwnode_handle *subdev;
> > + struct v4l2_fwnode_endpoint *vep;
> > + struct vip_bt656_bus *bt656_vep;
> > + struct v4l2_async_subdev *asd;
> > + int ret, rval;
> > +
> > + vep = &port->endpoint;
> > + bt656_vep = &port->bt656_endpoint;
> > +
> > + subdev = fwnode_graph_get_remote_port_parent(ep);
> > + if (!subdev) {
> > + vip_dbg(3, port, "can't get remote parent\n");
> > + return -EINVAL;
> > + }
> > +
> > + ret = v4l2_fwnode_endpoint_parse(ep, vep);
> > + if (ret) {
> > + vip_dbg(3, port, "Failed to parse endpoint:\n");
> > + fwnode_handle_put(subdev);
> > + return -EINVAL;
> > + }
> > +
> > + if (vep->bus_type == V4L2_MBUS_BT656) {
> > + if (fwnode_property_present(ep, "ti,vip-pixel-mux"))
> > + bt656_vep->pixmux = 1;
> > + else
> > + bt656_vep->pixmux = 0;
> > + vip_dbg(3, port, "ti,vip-pixel-mux %u\n", bt656_vep->pixmux);
> > +
> > + bt656_vep->num_channels = 0;
> > + rval = fwnode_property_read_u8_array(ep, "ti,vip-channels",
> > + NULL, 0);
> > + if (rval > 0) {
> > + bt656_vep->num_channels =
> > + min_t(int, ARRAY_SIZE(bt656_vep->channels),
> > + rval);
> > +
> > + fwnode_property_read_u8_array(ep, "ti,vip-channels",
> > + bt656_vep->channels,
> > + bt656_vep->num_channels);
> > + } else {
> > + /* channels is not specified then assume 1 channel */
> > + bt656_vep->num_channels = 1;
> > + bt656_vep->channels[0] = 0;
> > + }
> > +
> > + vip_dbg(3, port, "ti,vip-channels %u\n",
> > + bt656_vep->num_channels);
> > +
> > + if (bt656_vep->pixmux &&
> > + (bt656_vep->num_channels != 1 ||
> > + bt656_vep->num_channels != 2 ||
> > + bt656_vep->num_channels != 4)) {
> > + vip_warn(port,
> > + "ti,vip-pixel-mux is set but number of channels is not 1, 2 or 4: (%u), disabling ti,vip-pixel-mux.\n",
> > + bt656_vep->num_channels);
> > + bt656_vep->pixmux = 0;
> > + }
> > + }
> > +
> > + v4l2_async_notifier_init(notifier);
> > +
> > + asd = v4l2_async_notifier_add_fwnode_subdev(notifier, subdev,
> > + sizeof(*asd));
> > + if (IS_ERR(asd)) {
> > + vip_dbg(1, port, "Error adding asd\n");
> > + fwnode_handle_put(subdev);
> > + v4l2_async_notifier_cleanup(notifier);
> > + return -EINVAL;
> > + }
> > +
> > + notifier->ops = &vip_async_ops;
> > + ret = v4l2_async_notifier_register(dev->v4l2_dev, notifier);
> > + if (ret) {
> > + vip_dbg(1, port, "Error registering async notifier\n");
> > + v4l2_async_notifier_cleanup(notifier);
> > + ret = -EINVAL;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int vip_endpoint_scan(struct platform_device *pdev)
> > +{
> > + struct device_node *parent = pdev->dev.of_node;
> > + struct device_node *ep = NULL;
> > + int count = 0, p;
> > +
> > + for (p = 0; p < (VIP_NUM_PORTS * VIP_NUM_SLICES); p++) {
> > + ep = of_graph_get_endpoint_by_regs(parent, p, 0);
> > + if (!ep)
> > + continue;
> > +
> > + count++;
> > + of_node_put(ep);
> > + }
> > +
> > + return count;
> > +}
> > +
> > +static const char *vip_parse_fwnode_label(struct fwnode_handle *fwnode)
> > +{
> > + const char *label = NULL;
> > + int ret;
> > +
> > + if (!fwnode)
> > + return NULL;
> > +
> > + ret = fwnode_property_read_string(fwnode, "label", &label);
> > + if (ret)
> > + return ERR_PTR(ret);
> > +
> > + return label;
> > +}
> > +
> > +static int vip_get_clk_polarity(struct platform_device *pdev,
> > + struct vip_clk_polarity *pol)
> > +{
> > + struct device_node *parent = pdev->dev.of_node;
> > + struct of_phandle_args args;
> > + int ret, i;
> > +
> > + if (!pol || !parent ||
> > + !of_property_read_bool(parent, "ti,vip-clk-polarity"))
> > + return -EINVAL;
> > +
> > + pol->rm_pol = syscon_regmap_lookup_by_phandle(parent,
> > + "ti,vip-clk-polarity");
> > + if (IS_ERR(pol->rm_pol)) {
> > + dev_err(&pdev->dev, "failed to get ti,vip-clk-polarity regmap\n");
> > + return PTR_ERR(pol->rm_pol);
> > + }
> > +
> > + ret = of_parse_phandle_with_fixed_args(parent, "ti,vip-clk-polarity",
> > + 5, 0, &args);
> > + if (ret) {
> > + dev_err(&pdev->dev, "failed to parse ti,vip-clk-polarity\n");
> > + return ret;
> > + }
> > +
> > + pol->rm_offset = args.args[0];
> > +
> > + for (i = 0; i < ARRAY_SIZE(pol->rm_bit_field); i++)
> > + pol->rm_bit_field[i] = args.args[i + 1];
> > +
> > + return 0;
> > +}
> > +
> > +static int vip_probe_complete(struct platform_device *pdev)
> > +{
> > + struct vip_shared *shared = platform_get_drvdata(pdev);
> > + struct vip_clk_polarity *pol;
> > + struct vip_port *port;
> > + struct vip_dev *dev;
> > + struct device_node *parent = pdev->dev.of_node;
> > + struct fwnode_handle *ep, *port_node;
> > + const char *port_name;
> > + int ret, slice_id, port_id, p;
> > +
> > + pol = devm_kzalloc(&pdev->dev, sizeof(*pol), GFP_KERNEL);
> > + if (!pol)
> > + return -ENOMEM;
> > +
> > + ret = vip_get_clk_polarity(pdev, pol);
> > + if (ret)
> > + return ret;
> > +
> > + for (p = 0; p < (VIP_NUM_PORTS * VIP_NUM_SLICES); p++) {
> > + ep = fwnode_graph_get_next_endpoint_by_regs(of_fwnode_handle(parent),
> > + p, 0);
> > + if (!ep)
> > + continue;
> > +
> > + port_node = fwnode_get_parent(ep);
> > + if (!port_node) {
> > + dev_err(&pdev->dev, "can't get port of ep(%s)\n",
> > + ep->ops->get_name(ep));
> > + fwnode_handle_put(ep);
> > + return -EINVAL;
> > + }
> > +
> > + port_name = vip_parse_fwnode_label(port_node);
> > + if (IS_ERR_OR_NULL(port_name)) {
> > + dev_err(&pdev->dev, "can't get label of port(%s)\n",
> > + port_node->ops->get_name(port_node));
> > + fwnode_handle_put(ep);
> > + fwnode_handle_put(port_node);
> > + return PTR_ERR(port_name);
> > + }
> > +
> > + switch (p) {
> > + case 0:
> > + slice_id = VIP_SLICE1; port_id = VIP_PORTA;
> > + break;
> > + case 1:
> > + slice_id = VIP_SLICE1; port_id = VIP_PORTB;
> > + break;
> > + case 2:
> > + slice_id = VIP_SLICE2; port_id = VIP_PORTA;
> > + break;
> > + case 3:
> > + slice_id = VIP_SLICE2; port_id = VIP_PORTB;
> > + break;
> > + default:
> > + dev_err(&pdev->dev, "Unknown port reg=<%d>\n", p);
> > + continue;
> > + }
> > +
> > + ret = alloc_port(shared->devs[slice_id], port_id, port_name);
> > + if (ret < 0)
> > + continue;
> > +
> > + dev = shared->devs[slice_id];
> > + dev->pclk_pol = pol;
> > + port = dev->ports[port_id];
> > +
> > + vip_register_subdev_notif(port, ep);
> > + fwnode_handle_put(ep);
> > + fwnode_handle_put(port_node);
> > + }
> > + return 0;
> > +}
> > +
> > +static int vip_probe_slice(struct platform_device *pdev, int slice)
> > +{
> > + struct vip_shared *shared = platform_get_drvdata(pdev);
> > + struct vip_dev *dev;
> > + struct vip_parser_data *parser;
> > + int ret;
> > +
> > + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> > + if (!dev)
> > + return -ENOMEM;
> > +
> > + snprintf(dev->name, sizeof(dev->name), "%ss%d", shared->name, slice);
> > +
> > + dev->irq = platform_get_irq(pdev, slice);
> > + if (dev->irq < 0)
> > + return dev->irq;
> > +
> > + ret = devm_request_irq(&pdev->dev, dev->irq, vip_irq,
> > + 0, dev->name, dev);
> > + if (ret < 0)
> > + return -ENOMEM;
> > +
> > + spin_lock_init(&dev->slock);
> > + mutex_init(&dev->mutex);
> > +
> > + dev->slice_id = slice;
> > + dev->pdev = pdev;
> > + dev->res = shared->res;
> > + dev->base = shared->base;
> > + dev->v4l2_dev = &shared->v4l2_dev;
> > +
> > + dev->shared = shared;
> > + shared->devs[slice] = dev;
> > +
> > + vip_top_reset(dev);
> > + vip_set_slice_path(dev, VIP_MULTI_CHANNEL_DATA_SELECT, 1);
> > +
> > + parser = devm_kzalloc(&pdev->dev, sizeof(*dev->parser), GFP_KERNEL);
> > + if (!parser)
> > + return PTR_ERR(parser);
> > +
> > + parser->res = platform_get_resource_byname(pdev,
> > + IORESOURCE_MEM,
> > + (slice == 0) ?
> > + "parser0" :
> > + "parser1");
> > + parser->base = devm_ioremap_resource(&pdev->dev, parser->res);
> > + if (IS_ERR(parser->base))
> > + return PTR_ERR(parser->base);
> > +
> > + parser->pdev = pdev;
> > + dev->parser = parser;
> > +
> > + dev->sc_assigned = VIP_NOT_ASSIGNED;
> > + dev->sc = sc_create(pdev, (slice == 0) ? "sc0" : "sc1");
> > + if (IS_ERR(dev->sc))
> > + return PTR_ERR(dev->sc);
> > +
> > + dev->csc_assigned = VIP_NOT_ASSIGNED;
> > + dev->csc = csc_create(pdev, (slice == 0) ? "csc0" : "csc1");
> > + if (IS_ERR(dev->sc))
> > + return PTR_ERR(dev->sc);
> > +
> > + return 0;
> > +}
> > +
> > +static int vip_probe(struct platform_device *pdev)
> > +{
> > + struct vip_shared *shared;
> > + struct pinctrl *pinctrl;
> > + int ret, slice = VIP_SLICE1;
> > + u32 tmp, pid;
> > + const char *instance_name;
> > + struct fwnode_handle *fwnode;
> > +
> > + fwnode = of_fwnode_handle(pdev->dev.of_node);
> > + if (!fwnode)
> > + return -ENODEV;
> > +
> > + instance_name = vip_parse_fwnode_label(fwnode);
> > + if (IS_ERR_OR_NULL(instance_name))
> > + return PTR_ERR(instance_name);
> > +
> > + /* If there are no endpoint defined there is nothing to do */
> > + if (!vip_endpoint_scan(pdev))
> > + return -ENODEV;
> > +
> > + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> > + if (ret) {
> > + dev_err(&pdev->dev,
> > + "32-bit consistent DMA enable failed\n");
> > + return ret;
> > + }
> > +
> > + shared = devm_kzalloc(&pdev->dev, sizeof(*shared), GFP_KERNEL);
> > + if (!shared)
> > + return -ENOMEM;
> > +
> > + shared->res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vip");
> > + shared->base = devm_ioremap_resource(&pdev->dev, shared->res);
> > + if (IS_ERR(shared->base))
> > + return PTR_ERR(shared->base);
> > +
> > + shared->name = instance_name;
> > +
> > + vip_init_format_info(&pdev->dev);
> > +
> > + pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
> > +
> > + pm_runtime_enable(&pdev->dev);
> > +
> > + ret = pm_runtime_get_sync(&pdev->dev);
> > + if (ret)
> > + goto err_runtime_disable;
> > +
> > + /* Make sure H/W module has the right functionality */
> > + pid = reg_read(shared, VIP_PID);
> > + tmp = get_field(pid, VIP_PID_FUNC_MASK, VIP_PID_FUNC_SHIFT);
> > +
> > + if (tmp != VIP_PID_FUNC) {
> > + dev_info(&pdev->dev, "vip: unexpected PID function: 0x%x\n",
> > + tmp);
> > + ret = -ENODEV;
> > + goto err_runtime_put;
> > + }
> > +
> > + ret = v4l2_device_register(&pdev->dev, &shared->v4l2_dev);
> > + if (ret)
> > + goto err_runtime_put;
> > +
> > + /* enable clocks, so the firmware will load properly */
> > + vip_shared_set_clock_enable(shared, 1);
> > + vip_top_vpdma_reset(shared);
> > +
> > + platform_set_drvdata(pdev, shared);
> > +
> > + v4l2_ctrl_handler_init(&shared->ctrl_handler, 11);
> > + shared->v4l2_dev.ctrl_handler = &shared->ctrl_handler;
> > +
> > + for (slice = VIP_SLICE1; slice < VIP_NUM_SLICES; slice++) {
> > + ret = vip_probe_slice(pdev, slice);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Creating slice failed");
> > + goto err_dev_unreg;
> > + }
> > + }
> > +
> > + shared->vpdma = &shared->vpdma_data;
> > + ret = vpdma_create(pdev, shared->vpdma, vip_vpdma_fw_cb);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Creating VPDMA failed");
> > + goto err_dev_unreg;
> > + }
> > +
> > + return 0;
> > +
> > +err_dev_unreg:
> > + v4l2_ctrl_handler_free(&shared->ctrl_handler);
> > + v4l2_device_unregister(&shared->v4l2_dev);
> > +err_runtime_put:
> > + pm_runtime_put_sync(&pdev->dev);
> > +err_runtime_disable:
> > + pm_runtime_disable(&pdev->dev);
> > +
> > + return ret;
> > +}
> > +
> > +static int vip_remove(struct platform_device *pdev)
> > +{
> > + struct vip_shared *shared = platform_get_drvdata(pdev);
> > + struct vip_dev *dev;
> > + int slice;
> > +
> > + for (slice = 0; slice < VIP_NUM_SLICES; slice++) {
> > + dev = shared->devs[slice];
> > + if (!dev)
> > + continue;
> > +
> > + free_port(dev->ports[VIP_PORTA]);
> > + free_port(dev->ports[VIP_PORTB]);
> > + }
> > +
> > + v4l2_ctrl_handler_free(&shared->ctrl_handler);
> > +
> > + pm_runtime_put_sync(&pdev->dev);
> > + pm_runtime_disable(&pdev->dev);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id vip_of_match[] = {
> > + {
> > + .compatible = "ti,dra7-vip",
> > + },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, vip_of_match);
> > +
> > +static struct platform_driver vip_pdrv = {
> > + .probe = vip_probe,
> > + .remove = vip_remove,
> > + .driver = {
> > + .name = VIP_MODULE_NAME,
> > + .of_match_table = vip_of_match,
> > + },
> > +};
> > +
> > +module_platform_driver(vip_pdrv);
> > +
> > +MODULE_DESCRIPTION("TI VIP driver");
> > +MODULE_AUTHOR("Texas Instruments");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/drivers/media/platform/ti-vpe/vip.h b/drivers/media/platform/ti-vpe/vip.h
> > new file mode 100644
> > index 000000000000..f078a16a85b7
> > --- /dev/null
> > +++ b/drivers/media/platform/ti-vpe/vip.h
> > @@ -0,0 +1,724 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * TI VIP capture driver
> > + *
> > + * Copyright (C) 2018 Texas Instruments Incorpated - http://www.ti.com/
> > + * David Griego, <dagriego@...lakesoftware.com>
> > + * Dale Farnsworth, <dale@...nsworth.org>
> > + * Nikhil Devshatwar, <nikhil.nd@...com>
> > + * Benoit Parrot, <bparrot@...com>
> > + */
> > +
> > +#ifndef __TI_VIP_H
> > +#define __TI_VIP_H
> > +
> > +#include <linux/videodev2.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-event.h>
> > +#include <media/v4l2-ioctl.h>
> > +#include <media/videobuf2-core.h>
> > +#include <media/videobuf2-dma-contig.h>
> > +#include <media/videobuf2-memops.h>
> > +#include <media/v4l2-fwnode.h>
> > +
> > +#include "vpdma.h"
> > +#include "vpdma_priv.h"
> > +#include "sc.h"
> > +#include "csc.h"
> > +
> > +#define VIP_SLICE1 0
> > +#define VIP_SLICE2 1
> > +#define VIP_NUM_SLICES 2
> > +
> > +/*
> > + * Additionnal client identifiers used for VPDMA configuration descriptors
> > + */
> > +#define VIP_SLICE1_CFD_SC_CLIENT 7
> > +#define VIP_SLICE2_CFD_SC_CLIENT 8
> > +
> > +#define VIP_PORTA 0
> > +#define VIP_PORTB 1
> > +#define VIP_NUM_PORTS 2
> > +
> > +#define VIP_MAX_PLANES 2
> > +#define VIP_LUMA 0
> > +#define VIP_CHROMA 1
> > +
> > +#define VIP_CAP_STREAMS_PER_PORT 16
> > +#define VIP_VBI_STREAMS_PER_PORT 16
> > +
> > +#define VIP_MAX_SUBDEV 5
> > +/*
> > + * This value needs to be at least as large as the number of entry in
> > + * vip_formats[].
> > + * When vip_formats[] is modified make sure to adjust this value also.
> > + */
> > +#define VIP_MAX_ACTIVE_FMT 16
> > +/*
> > + * Colorspace conversion unit can be in one of 3 modes:
> > + * NA - Not Available on this port
> > + * Y2R - Needed for YUV to RGB on this port
> > + * R2Y - Needed for RGB to YUV on this port
> > + */
> > +enum vip_csc_state {
> > + VIP_CSC_NA = 0,
> > + VIP_CSC_Y2R,
> > + VIP_CSC_R2Y,
> > +};
> > +
> > +/* buffer for one video frame */
> > +struct vip_buffer {
> > + /* common v4l buffer stuff */
> > + struct vb2_v4l2_buffer vb;
> > + struct list_head list;
> > + bool drop;
> > +};
> > +
> > +/*
> > + * struct vip_fmt - VIP media bus format information
> > + * @fourcc: V4L2 pixel format FCC identifier
> > + * @code: V4L2 media bus format code
> > + * @colorspace: V4L2 colorspace identifier
> > + * @coplanar: 1 if unpacked Luma and Chroma, 0 otherwise (packed/interleaved)
> > + * @vpdma_fmt: VPDMA data format per plane.
> > + * @finfo: Cache v4l2_format_info for associated fourcc
> > + */
> > +struct vip_fmt {
> > + u32 fourcc;
> > + u32 code;
> > + u32 colorspace;
> > + u8 coplanar;
> > + const struct vpdma_data_format *vpdma_fmt[VIP_MAX_PLANES];
> > + const struct v4l2_format_info *finfo;
> > +};
> > +
> > +/*
> > + * The vip_parser_data structures contains the memory mapped
> > + * info to access the parser registers.
> > + */
> > +struct vip_parser_data {
> > + void __iomem *base;
> > + struct resource *res;
> > +
> > + struct platform_device *pdev;
> > +};
> > +
> > +/*
> > + * The vip_shared structure contains data that is shared by both
> > + * the VIP1 and VIP2 slices.
> > + */
> > +struct vip_shared {
> > + struct list_head list;
> > + struct resource *res;
> > + void __iomem *base;
> > + struct vpdma_data vpdma_data;
> > + struct vpdma_data *vpdma;
> > + struct v4l2_device v4l2_dev;
> > + struct vip_dev *devs[VIP_NUM_SLICES];
> > + struct v4l2_ctrl_handler ctrl_handler;
> > + const char *name;
> > +};
> > +
> > +/*
> > + * The vip_bt656_bus structure contains vip specific bt656 bus data.
> > + */
> > +struct vip_bt656_bus {
> > + unsigned char num_channels;
> > + unsigned char pixmux;
> > + unsigned char channels[16];
> > +};
> > +
> > +/*
> > + * The vip_clk_polarity structure contains the regmap, offset and bit field
> > + * definitions to control each port clock polarity.
> > + */
> > +struct vip_clk_polarity {
> > + struct regmap *rm_pol;
> > + u32 rm_offset;
> > + u32 rm_bit_field[4];
> > +};
> > +/*
> > + * There are two vip_dev structure, one for each vip slice: VIP1 & VIP2.
> > + */
> > +struct vip_dev {
> > + struct v4l2_device *v4l2_dev;
> > + struct platform_device *pdev;
> > + struct vip_shared *shared;
> > + struct resource *res;
> > + struct vip_clk_polarity *pclk_pol;
> > + int slice_id;
> > + int num_ports; /* count of open ports */
> > + struct mutex mutex;
> > + spinlock_t slock;
> > +
> > + int irq;
> > + void __iomem *base;
> > +
> > + struct vip_port *ports[VIP_NUM_PORTS];
> > +
> > + char name[16];
> > + /* parser data handle */
> > + struct vip_parser_data *parser;
> > + /* scaler data handle */
> > + struct sc_data *sc;
> > + /* scaler port assignation */
> > + int sc_assigned;
> > + /* csc data handle */
> > + struct csc_data *csc;
> > + /* csc port assignation */
> > + int csc_assigned;
> > +};
> > +
> > +/*
> > + * There are two vip_port structures for each vip_dev, one for port A
> > + * and one for port B.
> > + */
> > +struct vip_port {
> > + struct vip_dev *dev;
> > + int port_id;
> > +
> > + unsigned int flags;
> > + struct v4l2_rect c_rect; /* crop rectangle */
> > + struct v4l2_mbus_framefmt mbus_framefmt;
> > + struct v4l2_mbus_framefmt try_mbus_framefmt;
> > +
> > + const char *name;
> > + struct vip_fmt *fmt; /* current format info */
> > + /* Number of channels/streams configured */
> > + int num_streams_configured;
> > + int num_streams; /* count of open streams */
> > + struct vip_stream *cap_streams[VIP_CAP_STREAMS_PER_PORT];
> > +
> > + struct v4l2_async_notifier notifier;
> > + struct v4l2_subdev *subdev;
> > + struct v4l2_fwnode_endpoint endpoint;
> > + struct vip_bt656_bus bt656_endpoint;
> > + unsigned int source_pad;
> > + struct vip_fmt *active_fmt[VIP_MAX_ACTIVE_FMT];
> > + int num_active_fmt;
> > + /* have new shadow reg values */
> > + bool load_mmrs;
> > + /* shadow reg addr/data block */
> > + struct vpdma_buf mmr_adb;
> > + /* h coeff buffer */
> > + struct vpdma_buf sc_coeff_h;
> > + /* v coeff buffer */
> > + struct vpdma_buf sc_coeff_v;
> > + /* Show if scaler resource is available on this port */
> > + bool scaler;
> > + /* Show the csc resource state on this port */
> > + enum vip_csc_state csc;
> > +};
> > +
> > +/*
> > + * When handling multiplexed video, there can be multiple streams for each
> > + * port. The vip_stream structure holds per-stream data.
> > + */
> > +struct vip_stream {
> > + struct video_device *vfd;
> > + struct vip_port *port;
> > + int stream_id;
> > + int list_num;
> > + int vfl_type;
> > + char name[16];
> > + struct work_struct recovery_work;
> > + int num_recovery;
> > + enum v4l2_field field; /* current field */
> > + unsigned int sequence; /* current frame/field seq */
> > + enum v4l2_field sup_field; /* supported field value */
> > + unsigned int width; /* frame width */
> > + unsigned int height; /* frame height */
> > + unsigned int bytesperline; /* bytes per line in memory */
> > + unsigned int sizeimage; /* image size in memory */
> > + struct list_head vidq; /* incoming vip_bufs queue */
> > + struct list_head dropq; /* drop vip_bufs queue */
> > + struct list_head post_bufs; /* vip_bufs to be DMAed */
> > + /* Maintain a list of used channels - Needed for VPDMA cleanup */
> > + int vpdma_channels[VPDMA_MAX_CHANNELS];
> > + int vpdma_channels_to_abort[VPDMA_MAX_CHANNELS];
> > + struct vpdma_desc_list desc_list; /* DMA descriptor list */
> > + struct vpdma_dtd *write_desc;
> > + /* next unused desc_list addr */
> > + void *desc_next;
> > + struct vb2_queue vb_vidq;
> > +};
> > +
> > +/*
> > + * VIP Enumerations
> > + */
> > +enum data_path_select {
> > + ALL_FIELDS_DATA_SELECT = 0,
> > + VIP_CSC_SRC_DATA_SELECT,
> > + VIP_SC_SRC_DATA_SELECT,
> > + VIP_RGB_SRC_DATA_SELECT,
> > + VIP_RGB_OUT_LO_DATA_SELECT,
> > + VIP_RGB_OUT_HI_DATA_SELECT,
> > + VIP_CHR_DS_1_SRC_DATA_SELECT,
> > + VIP_CHR_DS_2_SRC_DATA_SELECT,
> > + VIP_MULTI_CHANNEL_DATA_SELECT,
> > + VIP_CHR_DS_1_DATA_BYPASS,
> > + VIP_CHR_DS_2_DATA_BYPASS,
> > +};
> > +
> > +
> > +enum data_interface_modes {
> > + SINGLE_24B_INTERFACE = 0,
> > + SINGLE_16B_INTERFACE = 1,
> > + DUAL_8B_INTERFACE = 2,
> > +};
> > +
> > +enum sync_types {
> > + EMBEDDED_SYNC_SINGLE_YUV422 = 0,
> > + EMBEDDED_SYNC_2X_MULTIPLEXED_YUV422 = 1,
> > + EMBEDDED_SYNC_4X_MULTIPLEXED_YUV422 = 2,
> > + EMBEDDED_SYNC_LINE_MULTIPLEXED_YUV422 = 3,
> > + DISCRETE_SYNC_SINGLE_YUV422 = 4,
> > + EMBEDDED_SYNC_SINGLE_RGB_OR_YUV444 = 5,
> > + DISCRETE_SYNC_SINGLE_RGB_24B = 10,
> > +};
> > +
> > +#define VIP_NOT_ASSIGNED -1
> > +
> > +/*
> > + * Register offsets and field selectors
> > + */
> > +#define VIP_PID_FUNC 0xf02
> > +
> > +#define VIP_PID 0x0000
> > +#define VIP_PID_MINOR_MASK 0x3f
> > +#define VIP_PID_MINOR_SHIFT 0
> > +#define VIP_PID_CUSTOM_MASK 0x03
> > +#define VIP_PID_CUSTOM_SHIFT 6
> > +#define VIP_PID_MAJOR_MASK 0x07
> > +#define VIP_PID_MAJOR_SHIFT 8
> > +#define VIP_PID_RTL_MASK 0x1f
> > +#define VIP_PID_RTL_SHIFT 11
> > +#define VIP_PID_FUNC_MASK 0xfff
> > +#define VIP_PID_FUNC_SHIFT 16
> > +#define VIP_PID_SCHEME_MASK 0x03
> > +#define VIP_PID_SCHEME_SHIFT 30
> > +
> > +#define VIP_SYSCONFIG 0x0010
> > +#define VIP_SYSCONFIG_IDLE_MASK 0x03
> > +#define VIP_SYSCONFIG_IDLE_SHIFT 2
> > +#define VIP_SYSCONFIG_STANDBY_MASK 0x03
> > +#define VIP_SYSCONFIG_STANDBY_SHIFT 4
> > +#define VIP_FORCE_IDLE_MODE 0
> > +#define VIP_NO_IDLE_MODE 1
> > +#define VIP_SMART_IDLE_MODE 2
> > +#define VIP_SMART_IDLE_WAKEUP_MODE 3
> > +#define VIP_FORCE_STANDBY_MODE 0
> > +#define VIP_NO_STANDBY_MODE 1
> > +#define VIP_SMART_STANDBY_MODE 2
> > +#define VIP_SMART_STANDBY_WAKEUP_MODE 3
> > +
> > +#define VIP_INTC_INTX_OFFSET 0x0020
> > +
> > +#define VIP_INT0_STATUS0_RAW_SET 0x0020
> > +#define VIP_INT0_STATUS0_RAW VIP_INT0_STATUS0_RAW_SET
> > +#define VIP_INT0_STATUS0_CLR 0x0028
> > +#define VIP_INT0_STATUS0 VIP_INT0_STATUS0_CLR
> > +#define VIP_INT0_ENABLE0_SET 0x0030
> > +#define VIP_INT0_ENABLE0 VIP_INT0_ENABLE0_SET
> > +#define VIP_INT0_ENABLE0_CLR 0x0038
> > +#define VIP_INT0_LIST0_COMPLETE BIT(0)
> > +#define VIP_INT0_LIST0_NOTIFY BIT(1)
> > +#define VIP_INT0_LIST1_COMPLETE BIT(2)
> > +#define VIP_INT0_LIST1_NOTIFY BIT(3)
> > +#define VIP_INT0_LIST2_COMPLETE BIT(4)
> > +#define VIP_INT0_LIST2_NOTIFY BIT(5)
> > +#define VIP_INT0_LIST3_COMPLETE BIT(6)
> > +#define VIP_INT0_LIST3_NOTIFY BIT(7)
> > +#define VIP_INT0_LIST4_COMPLETE BIT(8)
> > +#define VIP_INT0_LIST4_NOTIFY BIT(9)
> > +#define VIP_INT0_LIST5_COMPLETE BIT(10)
> > +#define VIP_INT0_LIST5_NOTIFY BIT(11)
> > +#define VIP_INT0_LIST6_COMPLETE BIT(12)
> > +#define VIP_INT0_LIST6_NOTIFY BIT(13)
> > +#define VIP_INT0_LIST7_COMPLETE BIT(14)
> > +#define VIP_INT0_LIST7_NOTIFY BIT(15)
> > +#define VIP_INT0_DESCRIPTOR BIT(16)
> > +#define VIP_VIP1_PARSER_INT BIT(20)
> > +#define VIP_VIP2_PARSER_INT BIT(21)
> > +
> > +#define VIP_INT0_STATUS1_RAW_SET 0x0024
> > +#define VIP_INT0_STATUS1_RAW VIP_INT0_STATUS0_RAW_SET
> > +#define VIP_INT0_STATUS1_CLR 0x002c
> > +#define VIP_INT0_STATUS1 VIP_INT0_STATUS0_CLR
> > +#define VIP_INT0_ENABLE1_SET 0x0034
> > +#define VIP_INT0_ENABLE1 VIP_INT0_ENABLE0_SET
> > +#define VIP_INT0_ENABLE1_CLR 0x003c
> > +#define VIP_INT0_ENABLE1_STAT 0x004c
> > +#define VIP_INT0_CHANNEL_GROUP0 BIT(0)
> > +#define VIP_INT0_CHANNEL_GROUP1 BIT(1)
> > +#define VIP_INT0_CHANNEL_GROUP2 BIT(2)
> > +#define VIP_INT0_CHANNEL_GROUP3 BIT(3)
> > +#define VIP_INT0_CHANNEL_GROUP4 BIT(4)
> > +#define VIP_INT0_CHANNEL_GROUP5 BIT(5)
> > +#define VIP_INT0_CLIENT BIT(7)
> > +#define VIP_VIP1_DS1_UV_ERROR_INT BIT(22)
> > +#define VIP_VIP1_DS2_UV_ERROR_INT BIT(23)
> > +#define VIP_VIP2_DS1_UV_ERROR_INT BIT(24)
> > +#define VIP_VIP2_DS2_UV_ERROR_INT BIT(25)
> > +
> > +#define VIP_INTC_E0I 0x00a0
> > +
> > +#define VIP_CLK_ENABLE 0x0100
> > +#define VIP_VPDMA_CLK_ENABLE BIT(0)
> > +#define VIP_VIP1_DATA_PATH_CLK_ENABLE BIT(16)
> > +#define VIP_VIP2_DATA_PATH_CLK_ENABLE BIT(17)
> > +
> > +#define VIP_CLK_RESET 0x0104
> > +#define VIP_VPDMA_RESET BIT(0)
> > +#define VIP_VPDMA_CLK_RESET_MASK 0x1
> > +#define VIP_VPDMA_CLK_RESET_SHIFT 0
> > +#define VIP_DATA_PATH_CLK_RESET_MASK 0x1
> > +#define VIP_VIP1_DATA_PATH_RESET_SHIFT 16
> > +#define VIP_VIP2_DATA_PATH_RESET_SHIFT 17
> > +#define VIP_VIP1_DATA_PATH_RESET BIT(16)
> > +#define VIP_VIP2_DATA_PATH_RESET BIT(17)
> > +#define VIP_VIP1_PARSER_RESET BIT(18)
> > +#define VIP_VIP2_PARSER_RESET BIT(19)
> > +#define VIP_VIP1_CSC_RESET BIT(20)
> > +#define VIP_VIP2_CSC_RESET BIT(21)
> > +#define VIP_VIP1_SC_RESET BIT(22)
> > +#define VIP_VIP2_SC_RESET BIT(23)
> > +#define VIP_VIP1_DS1_RESET BIT(25)
> > +#define VIP_VIP2_DS1_RESET BIT(26)
> > +#define VIP_VIP1_DS2_RESET BIT(27)
> > +#define VIP_VIP2_DS2_RESET BIT(28)
> > +#define VIP_MAIN_RESET BIT(31)
> > +
> > +#define VIP_VIP1_DATA_PATH_SELECT 0x010c
> > +#define VIP_VIP2_DATA_PATH_SELECT 0x0110
> > +#define VIP_CSC_SRC_SELECT_MASK 0x07
> > +#define VIP_CSC_SRC_SELECT_SHFT 0
> > +#define VIP_SC_SRC_SELECT_MASK 0x07
> > +#define VIP_SC_SRC_SELECT_SHFT 3
> > +#define VIP_RGB_SRC_SELECT BIT(6)
> > +#define VIP_RGB_OUT_LO_SRC_SELECT BIT(7)
> > +#define VIP_RGB_OUT_HI_SRC_SELECT BIT(8)
> > +#define VIP_DS1_SRC_SELECT_MASK 0x07
> > +#define VIP_DS1_SRC_SELECT_SHFT 9
> > +#define VIP_DS2_SRC_SELECT_MASK 0x07
> > +#define VIP_DS2_SRC_SELECT_SHFT 12
> > +#define VIP_MULTI_CHANNEL_SELECT BIT(15)
> > +#define VIP_DS1_BYPASS BIT(16)
> > +#define VIP_DS2_BYPASS BIT(17)
> > +#define VIP_TESTPORT_B_SELECT BIT(26)
> > +#define VIP_TESTPORT_A_SELECT BIT(27)
> > +#define VIP_DATAPATH_SELECT_MASK 0x0f
> > +#define VIP_DATAPATH_SELECT_SHFT 28
> > +
> > +#define VIP1_PARSER_REG_OFFSET 0x5500
> > +#define VIP2_PARSER_REG_OFFSET 0x5a00
> > +
> > +#define VIP_PARSER_MAIN_CFG 0x0000
> > +#define VIP_DATA_INTERFACE_MODE_MASK 0x03
> > +#define VIP_DATA_INTERFACE_MODE_SHFT 0
> > +#define VIP_CLIP_BLANK BIT(4)
> > +#define VIP_CLIP_ACTIVE BIT(5)
> > +
> > +#define VIP_PARSER_PORTA_0 0x0004
> > +#define VIP_PARSER_PORTB_0 0x000c
> > +#define VIP_SYNC_TYPE_MASK 0x0f
> > +#define VIP_SYNC_TYPE_SHFT 0
> > +#define VIP_CTRL_CHANNEL_SEL_MASK 0x03
> > +#define VIP_CTRL_CHANNEL_SEL_SHFT 4
> > +#define VIP_ASYNC_FIFO_WR BIT(6)
> > +#define VIP_ASYNC_FIFO_RD BIT(7)
> > +#define VIP_PORT_ENABLE BIT(8)
> > +#define VIP_FID_POLARITY BIT(9)
> > +#define VIP_PIXCLK_EDGE_POLARITY BIT(10)
> > +#define VIP_HSYNC_POLARITY BIT(11)
> > +#define VIP_VSYNC_POLARITY BIT(12)
> > +#define VIP_ACTVID_POLARITY BIT(13)
> > +#define VIP_FID_DETECT_MODE BIT(14)
> > +#define VIP_USE_ACTVID_HSYNC_ONLY BIT(15)
> > +#define VIP_FID_SKEW_PRECOUNT_MASK 0x3f
> > +#define VIP_FID_SKEW_PRECOUNT_SHFT 16
> > +#define VIP_DISCRETE_BASIC_MODE BIT(22)
> > +#define VIP_SW_RESET BIT(23)
> > +#define VIP_FID_SKEW_POSTCOUNT_MASK 0x3f
> > +#define VIP_FID_SKEW_POSTCOUNT_SHFT 24
> > +#define VIP_ANALYZER_2X4X_SRCNUM_POS BIT(30)
> > +#define VIP_ANALYZER_FVH_ERR_COR_EN BIT(31)
> > +
> > +#define VIP_PARSER_PORTA_1 0x0008
> > +#define VIP_PARSER_PORTB_1 0x0010
> > +#define VIP_SRC0_NUMLINES_MASK 0x0fff
> > +#define VIP_SRC0_NUMLINES_SHFT 0
> > +#define VIP_ANC_CHAN_SEL_8B_MASK 0x03
> > +#define VIP_ANC_CHAN_SEL_8B_SHFT 13
> > +#define VIP_SRC0_NUMPIX_MASK 0x0fff
> > +#define VIP_SRC0_NUMPIX_SHFT 16
> > +#define VIP_REPACK_SEL_MASK 0x07
> > +#define VIP_REPACK_SEL_SHFT 28
> > +
> > +#define VIP_PARSER_FIQ_MASK 0x0014
> > +#define VIP_PARSER_FIQ_CLR 0x0018
> > +#define VIP_PARSER_FIQ_STATUS 0x001c
> > +#define VIP_PORTA_VDET BIT(0)
> > +#define VIP_PORTB_VDET BIT(1)
> > +#define VIP_PORTA_ASYNC_FIFO_OF BIT(2)
> > +#define VIP_PORTB_ASYNC_FIFO_OF BIT(3)
> > +#define VIP_PORTA_OUTPUT_FIFO_YUV BIT(4)
> > +#define VIP_PORTA_OUTPUT_FIFO_ANC BIT(6)
> > +#define VIP_PORTB_OUTPUT_FIFO_YUV BIT(7)
> > +#define VIP_PORTB_OUTPUT_FIFO_ANC BIT(9)
> > +#define VIP_PORTA_CONN BIT(10)
> > +#define VIP_PORTA_DISCONN BIT(11)
> > +#define VIP_PORTB_CONN BIT(12)
> > +#define VIP_PORTB_DISCONN BIT(13)
> > +#define VIP_PORTA_SRC0_SIZE BIT(14)
> > +#define VIP_PORTB_SRC0_SIZE BIT(15)
> > +#define VIP_PORTA_YUV_PROTO_VIOLATION BIT(16)
> > +#define VIP_PORTA_ANC_PROTO_VIOLATION BIT(17)
> > +#define VIP_PORTB_YUV_PROTO_VIOLATION BIT(18)
> > +#define VIP_PORTB_ANC_PROTO_VIOLATION BIT(19)
> > +#define VIP_PORTA_CFG_DISABLE_COMPLETE BIT(20)
> > +#define VIP_PORTB_CFG_DISABLE_COMPLETE BIT(21)
> > +
> > +#define VIP_PARSER_PORTA_SOURCE_FID 0x0020
> > +#define VIP_PARSER_PORTA_ENCODER_FID 0x0024
> > +#define VIP_PARSER_PORTB_SOURCE_FID 0x0028
> > +#define VIP_PARSER_PORTB_ENCODER_FID 0x002c
> > +
> > +#define VIP_PARSER_PORTA_SRC0_SIZE 0x0030
> > +#define VIP_PARSER_PORTB_SRC0_SIZE 0x0070
> > +#define VIP_SOURCE_HEIGHT_MASK 0x0fff
> > +#define VIP_SOURCE_HEIGHT_SHFT 0
> > +#define VIP_SOURCE_WIDTH_MASK 0x0fff
> > +#define VIP_SOURCE_WIDTH_SHFT 16
> > +
> > +#define VIP_PARSER_PORTA_VDET_VEC 0x00b0
> > +#define VIP_PARSER_PORTB_VDET_VEC 0x00b4
> > +
> > +#define VIP_PARSER_PORTA_EXTRA2 0x00b8
> > +#define VIP_PARSER_PORTB_EXTRA2 0x00c8
> > +#define VIP_ANC_SKIP_NUMPIX_MASK 0x0fff
> > +#define VIP_ANC_SKIP_NUMPIX_SHFT 0
> > +#define VIP_ANC_BYPASS BIT(15)
> > +#define VIP_ANC_USE_NUMPIX_MASK 0x0fff
> > +#define VIP_ANC_USE_NUMPIX_SHFT 16
> > +#define VIP_ANC_TARGET_SRCNUM_MASK 0x0f
> > +#define VIP_ANC_TARGET_SRCNUM_SHFT 28
> > +
> > +#define VIP_PARSER_PORTA_EXTRA3 0x00bc
> > +#define VIP_PARSER_PORTB_EXTRA3 0x00cc
> > +#define VIP_ANC_SKIP_NUMLINES_MASK 0x0fff
> > +#define VIP_ANC_SKIP_NUMLINES_SHFT 0
> > +#define VIP_ANC_USE_NUMLINES_MASK 0x0fff
> > +#define VIP_ANC_USE_NUMLINES_SHFT 16
> > +
> > +#define VIP_PARSER_PORTA_EXTRA4 0x00c0
> > +#define VIP_PARSER_PORTB_EXTRA4 0x00d0
> > +#define VIP_ACT_SKIP_NUMPIX_MASK 0x0fff
> > +#define VIP_ACT_SKIP_NUMPIX_SHFT 0
> > +#define VIP_ACT_BYPASS BIT(15)
> > +#define VIP_ACT_USE_NUMPIX_MASK 0x0fff
> > +#define VIP_ACT_USE_NUMPIX_SHFT 16
> > +#define VIP_ACT_TARGET_SRCNUM_MASK 0x0f
> > +#define VIP_ACT_TARGET_SRCNUM_SHFT 28
> > +
> > +#define VIP_PARSER_PORTA_EXTRA5 0x00c4
> > +#define VIP_PARSER_PORTB_EXTRA5 0x00d4
> > +#define VIP_ACT_SKIP_NUMLINES_MASK 0x0fff
> > +#define VIP_ACT_SKIP_NUMLINES_SHFT 0
> > +#define VIP_ACT_USE_NUMLINES_MASK 0x0fff
> > +#define VIP_ACT_USE_NUMLINES_SHFT 16
> > +
> > +#define VIP_PARSER_PORTA_EXTRA6 0x00d8
> > +#define VIP_PARSER_PORTB_EXTRA6 0x00dc
> > +#define VIP_ANC_SRCNUM_STOP_IMM_SHFT 0
> > +#define VIP_YUV_SRCNUM_STOP_IMM_SHFT 16
> > +
> > +#define VIP_CSC_CSC00 0x0200
> > +#define VIP_CSC_A0_MASK 0x1fff
> > +#define VIP_CSC_A0_SHFT 0
> > +#define VIP_CSC_B0_MASK 0x1fff
> > +#define VIP_CSC_B0_SHFT 16
> > +
> > +#define VIP_CSC_CSC01 0x0204
> > +#define VIP_CSC_C0_MASK 0x1fff
> > +#define VIP_CSC_C0_SHFT 0
> > +#define VIP_CSC_A1_MASK 0x1fff
> > +#define VIP_CSC_A1_SHFT 16
> > +
> > +#define VIP_CSC_CSC02 0x0208
> > +#define VIP_CSC_B1_MASK 0x1fff
> > +#define VIP_CSC_B1_SHFT 0
> > +#define VIP_CSC_C1_MASK 0x1fff
> > +#define VIP_CSC_C1_SHFT 16
> > +
> > +#define VIP_CSC_CSC03 0x020c
> > +#define VIP_CSC_A2_MASK 0x1fff
> > +#define VIP_CSC_A2_SHFT 0
> > +#define VIP_CSC_B2_MASK 0x1fff
> > +#define VIP_CSC_B2_SHFT 16
> > +
> > +#define VIP_CSC_CSC04 0x0210
> > +#define VIP_CSC_C2_MASK 0x1fff
> > +#define VIP_CSC_C2_SHFT 0
> > +#define VIP_CSC_D0_MASK 0x0fff
> > +#define VIP_CSC_D0_SHFT 16
> > +
> > +#define VIP_CSC_CSC05 0x0214
> > +#define VIP_CSC_D1_MASK 0x0fff
> > +#define VIP_CSC_D1_SHFT 0
> > +#define VIP_CSC_D2_MASK 0x0fff
> > +#define VIP_CSC_D2_SHFT 16
> > +#define VIP_CSC_BYPASS BIT(28)
> > +
> > +#define VIP_SC_MP_SC0 0x0300
> > +#define VIP_INTERLACE_O BIT(0)
> > +#define VIP_LINEAR BIT(1)
> > +#define VIP_SC_BYPASS BIT(2)
> > +#define VIP_INVT_FID BIT(3)
> > +#define VIP_USE_RAV BIT(4)
> > +#define VIP_ENABLE_EV BIT(5)
> > +#define VIP_AUTH_HS BIT(6)
> > +#define VIP_DCM_2X BIT(7)
> > +#define VIP_DCM_4X BIT(8)
> > +#define VIP_HP_BYPASS BIT(9)
> > +#define VIP_INTERLACE_I BIT(10)
> > +#define VIP_ENABLE_SIN2_VER_INTP BIT(11)
> > +#define VIP_Y_PK_EN BIT(14)
> > +#define VIP_TRIM BIT(15)
> > +#define VIP_SELFGEN_FID BIT(16)
> > +
> > +#define VIP_SC_MP_SC1 0x0304
> > +#define VIP_ROW_ACC_INC_MASK 0x07ffffff
> > +#define VIP_ROW_ACC_INC_SHFT 0
> > +
> > +#define VIP_SC_MP_SC2 0x0308
> > +#define VIP_ROW_ACC_OFFSET_MASK 0x0fffffff
> > +#define VIP_ROW_ACC_OFFSET_SHFT 0
> > +
> > +#define VIP_SC_MP_SC3 0x030c
> > +#define VIP_ROW_ACC_OFFSET_B_MASK 0x0fffffff
> > +#define VIP_ROW_ACC_OFFSET_B_SHFT 0
> > +
> > +#define VIP_SC_MP_SC4 0x0310
> > +#define VIP_TAR_H_MASK 0x07ff
> > +#define VIP_TAR_H_SHFT 0
> > +#define VIP_TAR_W_MASK 0x07ff
> > +#define VIP_TAR_W_SHFT 12
> > +#define VIP_LIN_ACC_INC_U_MASK 0x07
> > +#define VIP_LIN_ACC_INC_U_SHFT 24
> > +#define VIP_NLIN_ACC_INIT_U_MASK 0x07
> > +#define VIP_NLIN_ACC_INIT_U_SHFT 28
> > +
> > +#define VIP_SC_MP_SC5 0x0314
> > +#define VIP_SRC_H_MASK 0x03ff
> > +#define VIP_SRC_H_SHFT 0
> > +#define VIP_SRC_W_MASK 0x07ff
> > +#define VIP_SRC_W_SHFT 12
> > +#define VIP_NLIN_ACC_INC_U_MASK 0x07
> > +#define VIP_NLIN_ACC_INC_U_SHFT 24
> > +
> > +#define VIP_SC_MP_SC6 0x0318
> > +#define VIP_ROW_ACC_INIT_RAV_MASK 0x03ff
> > +#define VIP_ROW_ACC_INIT_RAV_SHFT 0
> > +#define VIP_ROW_ACC_INIT_RAV_B_MASK 0x03ff
> > +#define VIP_ROW_ACC_INIT_RAV_B_SHFT 10
> > +
> > +#define VIP_SC_MP_SC8 0x0320
> > +#define VIP_NLIN_LEFT_MASK 0x07ff
> > +#define VIP_NLIN_LEFT_SHFT 0
> > +#define VIP_NLIN_RIGHT_MASK 0x07ff
> > +#define VIP_NLIN_RIGHT_SHFT 12
> > +
> > +#define VIP_SC_MP_SC9 0x0324
> > +#define VIP_LIN_ACC_INC VIP_SC_MP_SC9
> > +
> > +#define VIP_SC_MP_SC10 0x0328
> > +#define VIP_NLIN_ACC_INIT VIP_SC_MP_SC10
> > +
> > +#define VIP_SC_MP_SC11 0x032c
> > +#define VIP_NLIN_ACC_INC VIP_SC_MP_SC11
> > +
> > +#define VIP_SC_MP_SC12 0x0330
> > +#define VIP_COL_ACC_OFFSET_MASK 0x01ffffff
> > +#define VIP_COL_ACC_OFFSET_SHFT 0
> > +
> > +#define VIP_SC_MP_SC13 0x0334
> > +#define VIP_SC_FACTOR_RAV_MASK 0x03ff
> > +#define VIP_SC_FACTOR_RAV_SHFT 0
> > +#define VIP_CHROMA_INTP_THR_MASK 0x03ff
> > +#define VIP_CHROMA_INTP_THR_SHFT 12
> > +#define VIP_DELTA_CHROMA_THR_MASK 0x0f
> > +#define VIP_DELTA_CHROMA_THR_SHFT 24
> > +
> > +#define VIP_SC_MP_SC17 0x0344
> > +#define VIP_EV_THR_MASK 0x03ff
> > +#define VIP_EV_THR_SHFT 12
> > +#define VIP_DELTA_LUMA_THR_MASK 0x0f
> > +#define VIP_DELTA_LUMA_THR_SHFT 24
> > +#define VIP_DELTA_EV_THR_MASK 0x0f
> > +#define VIP_DELTA_EV_THR_SHFT 28
> > +
> > +#define VIP_SC_MP_SC18 0x0348
> > +#define VIP_HS_FACTOR_MASK 0x03ff
> > +#define VIP_HS_FACTOR_SHFT 0
> > +#define VIP_CONF_DEFAULT_MASK 0x01ff
> > +#define VIP_CONF_DEFAULT_SHFT 16
> > +
> > +#define VIP_SC_MP_SC19 0x034c
> > +#define VIP_HPF_COEFF0_MASK 0xff
> > +#define VIP_HPF_COEFF0_SHFT 0
> > +#define VIP_HPF_COEFF1_MASK 0xff
> > +#define VIP_HPF_COEFF1_SHFT 8
> > +#define VIP_HPF_COEFF2_MASK 0xff
> > +#define VIP_HPF_COEFF2_SHFT 16
> > +#define VIP_HPF_COEFF3_MASK 0xff
> > +#define VIP_HPF_COEFF3_SHFT 23
> > +
> > +#define VIP_SC_MP_SC20 0x0350
> > +#define VIP_HPF_COEFF4_MASK 0xff
> > +#define VIP_HPF_COEFF4_SHFT 0
> > +#define VIP_HPF_COEFF5_MASK 0xff
> > +#define VIP_HPF_COEFF5_SHFT 8
> > +#define VIP_HPF_NORM_SHFT_MASK 0x07
> > +#define VIP_HPF_NORM_SHFT_SHFT 16
> > +#define VIP_NL_LIMIT_MASK 0x1ff
> > +#define VIP_NL_LIMIT_SHFT 20
> > +
> > +#define VIP_SC_MP_SC21 0x0354
> > +#define VIP_NL_LO_THR_MASK 0x01ff
> > +#define VIP_NL_LO_THR_SHFT 0
> > +#define VIP_NL_LO_SLOPE_MASK 0xff
> > +#define VIP_NL_LO_SLOPE_SHFT 16
> > +
> > +#define VIP_SC_MP_SC22 0x0358
> > +#define VIP_NL_HI_THR_MASK 0x01ff
> > +#define VIP_NL_HI_THR_SHFT 0
> > +#define VIP_NL_HI_SLOPE_SH_MASK 0x07
> > +#define VIP_NL_HI_SLOPE_SH_SHFT 16
> > +
> > +#define VIP_SC_MP_SC23 0x035c
> > +#define VIP_GRADIENT_THR_MASK 0x07ff
> > +#define VIP_GRADIENT_THR_SHFT 0
> > +#define VIP_GRADIENT_THR_RANGE_MASK 0x0f
> > +#define VIP_GRADIENT_THR_RANGE_SHFT 12
> > +#define VIP_MIN_GY_THR_MASK 0xff
> > +#define VIP_MIN_GY_THR_SHFT 16
> > +#define VIP_MIN_GY_THR_RANGE_MASK 0x0f
> > +#define VIP_MIN_GY_THR_RANGE_SHFT 28
> > +
> > +#define VIP_SC_MP_SC24 0x0360
> > +#define VIP_ORG_H_MASK 0x07ff
> > +#define VIP_ORG_H_SHFT 0
> > +#define VIP_ORG_W_MASK 0x07ff
> > +#define VIP_ORG_W_SHFT 16
> > +
> > +#define VIP_SC_MP_SC25 0x0364
> > +#define VIP_OFF_H_MASK 0x07ff
> > +#define VIP_OFF_H_SHFT 0
> > +#define VIP_OFF_W_MASK 0x07ff
> > +#define VIP_OFF_W_SHFT 16
> > +
> > +#define VIP_VPDMA_REG_OFFSET 0xd000
> > +
> > +#endif
> >
>
> Regards,
>
> Hans
Regards,
Benoit
Powered by blists - more mailing lists