Date:   Tue, 26 May 2020 12:57:33 +0200
From:   Hans Verkuil <hverkuil@...all.nl>
To:     Dikshita Agarwal <dikshita@...eaurora.org>,
        linux-media@...r.kernel.org, stanimir.varbanov@...aro.org
Cc:     linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        vgarodia@...eaurora.org, majja@...eaurora.org, jdas@...eaurora.org
Subject: Re: [RFC] METADATA design using V4l2 Request API

Hi Dikshita,

My apologies for the delay, this was (mostly) due to various vacation days.

On 08/05/2020 08:21, Dikshita Agarwal wrote:
> There are many commercialized video use cases which needs metadata info
> to be circulated between v4l2 client and v4l2 driver.
> 
> METADATA has following requirements associated:
> •Metadata is an optional info available for a buffer. It is not mandatorily for every buffer.
>  For ex. consider metadata ROI (Region Of Interest). ROI is specified by clients to indicate
>  the region where enhanced quality is desired. This metadata is given as an input information
>  to encoder output plane. Client may or may not specify the ROI for a frame during encode as
>  an input metadata. Also if the client has not provided ROI metadata for a given frame,
>  it would be incorrect to take the metadata from previous frame. If the data and
>  metadata is asynchronous, it would be difficult for hardware to decide if it
>  needs to wait for metadata buffer or not before processing the input frame for encoding.
> •Synchronize the buffer requirement across both the video node/session
>  (incase metadata is being processed as a separate v4l2 video node/session).
>  This is to avoid buffer starvation.
> •Associate the metadata buffer with the data buffer without adding any pipeline delay
>  in waiting for each other. This is applicable both at the hardware side (the processing end)
>  and client side (the receiving end).
> •Low latency usecases like WFD/split rendering/game streaming/IMS have sub-50ms e2e latency
>  requirements, and it is not practical to stall the pipeline due to inherent framework latencies.
>  High performance usecase like high-frame rate playback/record can lead to frame loss during any pipeline latency.
>  
> To address all above requirements, we used v4l2 Request API as interlace.
> 
> As an experiment, We have introduced new control V4L2_CID_MPEG_VIDEO_VENUS_METADATA
> to contain the METADATA info. Exact controls can be finalized once the interface is discussed.
> 
> For setting metadata from userspace to kernel, let say on encode output plane,
> following code sequence was followed
> 1. Video driver is registering for media device and creating a media node in /dev
> 2. Request fd is allocated by calling MEDIA_IOC_REQUEST_ALLOC IOCTL on media fd.
> 3. METADATA configuration is being applied on request fd using VIDIOC_S_EXT_CTRLS IOCTL
>    and the same request fd is added to buf structure structure before calling VIDIOC_QBUF on video fd.
> 4. The same request is queued through MEDIA_REQUEST_IOC_QUEUE IOCTL to driver then, as a result
>    to which METADATA control will be applied to buffer through S_CTRL.
> 5. Once control is applied and request is completed, MEDIA_REQUEST_IOC_REINIT IOCTL is called
>    to re-initialize the request.

This is fine and should work well. It's what the Request API is for, so no problems here.

> 
> We could achieve the same on capture plane as well by removing few checks present currently
> in v4l2 core which restrict the implementation to only output plane.

Why do you need the Request API for the capture side in a memory-to-memory driver? It is not
clear from this patch series what the use-case is. There are reasons why this is currently
not allowed. So I need to know more about this.

Regards,

	Hans

> 
> We profiled below data with this implementation :
> 1. Total time taken ( round trip ) for setting up control data on video driver
>    with VIDIOC_S_EXT_CTRLS, QBUF and Queue Request: 737us
> 2. Time taken for first QBUF on Output plane to reach driver with REQUEST API enabled (One way): 723us
> 3. Time taken for first QBUF on Output plane to reach driver without REQUEST API (One way) : 250us
> 4. Time taken by each IOCTL to complete ( round trip ) with REQUEST API enabled :
>     a. VIDIOC_S_EXT_CTRLS : 201us
>     b. VIDIOC_QBUF : 92us
>     c. MEDIA_REQUEST_IOC_QUEUE: 386us
> 
> Kindly share your feedback/comments on the design/call sequence.
> Also as we experimented and enabled the metadata on capture plane as well, please comment if any issue in
> allowing the metadata exchange on capture plane as well.
> 
> Reference for client side implementation can be found at [1].
> 
> Thanks,
> Dikshita
> 
> [1] https://git.linaro.org/people/stanimir.varbanov/v4l2-encode.git/log/?h=dikshita/request-api
> 
> Dikshita Agarwal (3):
>   Register for media device     
>     - Initialize and register for media device     
>     - define venus_m2m_media_ops     
>     - Implement APIs to register/unregister media controller.
>   Enable Request API for output buffers     
>     - Add dependency on MEDIA_CONTROLLER_REQUEST_API in Kconfig.     
>     - Initialize vb2 ops buf_out_validate and buf_request_complete.     
>     - Add support for custom Metadata control V4L2_CID_MPEG_VIDEO_VENUS_METADATA     
>     - Implemeted/Integrated APIs for Request setup/complete.
>   Enable Request API for Capture Buffers
> 
>  drivers/media/common/videobuf2/videobuf2-v4l2.c |   4 +-
>  drivers/media/platform/Kconfig                  |   2 +-
>  drivers/media/platform/qcom/venus/core.h        |  36 ++++
>  drivers/media/platform/qcom/venus/helpers.c     | 247 +++++++++++++++++++++++-
>  drivers/media/platform/qcom/venus/helpers.h     |  15 ++
>  drivers/media/platform/qcom/venus/venc.c        |  63 +++++-
>  drivers/media/platform/qcom/venus/venc_ctrls.c  |  61 +++++-
>  drivers/media/v4l2-core/v4l2-ctrls.c            |  10 +
>  drivers/media/v4l2-core/v4l2-mem2mem.c          |  17 +-
>  include/media/v4l2-ctrls.h                      |   1 +
>  include/media/venus-ctrls.h                     |  22 +++
>  11 files changed, 465 insertions(+), 13 deletions(-)
>  create mode 100644 include/media/venus-ctrls.h
> 

Powered by blists - more mailing lists