[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200526050452.8837-1-wan.ahmad.zainie.wan.mohamad@intel.com>
Date: Tue, 26 May 2020 13:04:50 +0800
From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@...el.com>
To: kishon@...com, vkoul@...nel.org, robh+dt@...nel.org
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
andriy.shevchenko@...el.com, adrian.hunter@...el.com,
wan.ahmad.zainie.wan.mohamad@...el.com
Subject: [PATCH v2 0/2] phy: intel: Add Keem Bay eMMC PHY support
Hi.
The first part is to document DT bindings for Keem Bay eMMC PHY.
The second is the driver file, loosely based on phy-rockchip-emmc.c
and phy-intel-emmc.c. The latter is not being reused as there are
quite a number of differences i.e. registers offset, supported clock
rates, bitfield to set.
The patch was tested with Keem Bay evaluation module board.
Thank you.
Best regards,
Zainie
Changes since v1:
- Rework phy-keembay-emmc.c to make it similar to phy-intel-emmc.c.
- Use regmap_mmio, and remove reference to intel,syscon.
- Use node name phy@....
- Update license i.e. use dual license.
Wan Ahmad Zainie (2):
dt-bindings: phy: intel: Add Keem Bay eMMC PHY bindings
phy: intel: Add Keem Bay eMMC PHY support
.../bindings/phy/intel,keembay-emmc-phy.yaml | 45 +++
drivers/phy/intel/Kconfig | 8 +
drivers/phy/intel/Makefile | 1 +
drivers/phy/intel/phy-keembay-emmc.c | 321 ++++++++++++++++++
4 files changed, 375 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/intel,keembay-emmc-phy.yaml
create mode 100644 drivers/phy/intel/phy-keembay-emmc.c
--
2.17.1
Powered by blists - more mailing lists