linux-kernel - Re: [Freedreno] [PATCH 5/6] drm: msm: a6xx: use dev_pm_opp_set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAGETcx_fuS8cmTwCbZ024gqWOmeAc_ytZZ2P6yReBi7Y9O+qMQ@mail.gmail.com>
Date:   Wed, 27 May 2020 10:31:55 -0700
From:   Saravana Kannan <saravanak@...gle.com>
To:     Rob Clark <robdclark@...il.com>
Cc:     Sharat Masetty <smasetty@...eaurora.org>,
        freedreno <freedreno@...ts.freedesktop.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>, dri-devel@...edesktop.org,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Georgi Djakov <georgi.djakov@...aro.org>,
        Matthias Kaehlcke <mka@...omium.org>,
        Viresh Kumar <viresh.kumar@...aro.org>,
        Sibi Sankar <sibis@...eaurora.org>,
        Rajendra Nayak <rnayak@...eaurora.org>,
        Jordan Crouse <jcrouse@...eaurora.org>
Subject: Re: [Freedreno] [PATCH 5/6] drm: msm: a6xx: use dev_pm_opp_set_bw to
 set DDR bandwidth

On Wed, May 27, 2020 at 8:38 AM Rob Clark <robdclark@...il.com> wrote:
>
> On Wed, May 27, 2020 at 1:47 AM Sharat Masetty <smasetty@...eaurora.org> wrote:
> >
> > + more folks
> >
> > On 5/18/2020 9:55 PM, Rob Clark wrote:
> > > On Mon, May 18, 2020 at 7:23 AM Jordan Crouse <jcrouse@...eaurora.org> wrote:
> > >> On Thu, May 14, 2020 at 04:24:18PM +0530, Sharat Masetty wrote:
> > >>> This patches replaces the previously used static DDR vote and uses
> > >>> dev_pm_opp_set_bw() to scale GPU->DDR bandwidth along with scaling
> > >>> GPU frequency.
> > >>>
> > >>> Signed-off-by: Sharat Masetty <smasetty@...eaurora.org>
> > >>> ---
> > >>>   drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 6 +-----
> > >>>   1 file changed, 1 insertion(+), 5 deletions(-)
> > >>>
> > >>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> > >>> index 2d8124b..79433d3 100644
> > >>> --- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> > >>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> > >>> @@ -141,11 +141,7 @@ void a6xx_gmu_set_freq(struct msm_gpu *gpu, struct dev_pm_opp *opp)
> > >>>
> > >>>        gmu->freq = gmu->gpu_freqs[perf_index];
> > >>>
> > >>> -     /*
> > >>> -      * Eventually we will want to scale the path vote with the frequency but
> > >>> -      * for now leave it at max so that the performance is nominal.
> > >>> -      */
> > >>> -     icc_set_bw(gpu->icc_path, 0, MBps_to_icc(7216));
> > >>> +     dev_pm_opp_set_bw(&gpu->pdev->dev, opp);
> > >>>   }
> > >> This adds an implicit requirement that all targets need bandwidth settings
> > >> defined in the OPP or they won't get a bus vote at all. I would prefer that
> > >> there be an default escape valve but if not you'll need to add
> > >> bandwidth values for the sdm845 OPP that target doesn't regress.
> > >>
> > > it looks like we could maybe do something like:
> > >
> > >    ret = dev_pm_opp_set_bw(...);
> > >    if (ret) {
> > >        dev_warn_once(dev, "no bandwidth settings");
> > >        icc_set_bw(...);
> > >    }
> > >
> > > ?
> > >
> > > BR,
> > > -R
> >
> > There is a bit of an issue here - Looks like its not possible to two icc
> > handles to the same path.  Its causing double enumeration of the paths
> > in the icc core and messing up path votes. With [1] Since opp/core
> > already gets a handle to the icc path as part of table add,  drm/msm
> > could do either

Are you sure this is the real issue? I'd be surprised if this is a
real limitation. And if it is, it either needs to be fixed in the ICC
framework or OPP shouldn't be getting path handles by default (and
maybe let the driver set the handles before using OPP APIs to change
BW). I'd lean towards the former.

> > a) Conditionally enumerate gpu->icc_path handle only when pm/opp core
> > has not got the icc path handle. I could use something like [2] to
> > determine if should initialize gpu->icc_path*

This seems like a bandaid. Let's fix it correctly in ICC framework or
OPP framework.

> > b) Add peak-opp-configs in 845 dt and mandate all future versions to use
> > this bindings. With this, I can remove gpu->icc_path from msm/drm
> > completely and only rely on opp/core for bw voting.

I don't know what you mean by "peak-opp-configs" but I guess you are
referring to some kind of DT flag to say if you should vote for BW
directly or use the OPP framework? If so, I'm pretty sure that won't
fly. That's an OS implementation specific flag.

-Saravana