[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200527005224.GF782807@lunn.ch>
Date: Wed, 27 May 2020 02:52:24 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Dan Murphy <dmurphy@...com>
Cc: f.fainelli@...il.com, hkallweit1@...il.com, davem@...emloft.net,
robh@...nel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH net-next v3 4/4] net: dp83869: Add RGMII internal delay
configuration
> @@ -218,6 +224,7 @@ static int dp83869_of_init(struct phy_device *phydev)
> ret = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_STRAP_STS1);
> if (ret < 0)
> return ret;
> +
> if (ret & DP83869_STRAP_MIRROR_ENABLED)
> dp83869->port_mirroring = DP83869_PORT_MIRRORING_EN;
> else
This random white space change does not belong in this patch.
> @@ -232,6 +239,20 @@ static int dp83869_of_init(struct phy_device *phydev)
> &dp83869->tx_fifo_depth))
> dp83869->tx_fifo_depth = DP83869_PHYCR_FIFO_DEPTH_4_B_NIB;
>
> + ret = of_property_read_u32(of_node, "rx-internal-delay-ps",
> + &dp83869->rx_id_delay);
> + if (ret) {
> + dp83869->rx_id_delay = ret;
> + ret = 0;
> + }
This looks odd.
If this optional property is not found, -EINVAL will be returned. It
could also return -ENODATA. You then assign this error value to
dp83869->rx_id_delay? I would of expected you to assign 2000, the
default value?
> +
> + ret = of_property_read_u32(of_node, "tx-internal-delay-ps",
> + &dp83869->tx_id_delay);
> + if (ret) {
> + dp83869->tx_id_delay = ret;
> + ret = 0;
> + }
> +
> return ret;
> }
> #else
> @@ -367,10 +388,45 @@ static int dp83869_configure_mode(struct phy_device *phydev,
> return ret;
> }
>
> +static int dp83869_get_delay(struct phy_device *phydev)
> +{
> + struct dp83869_private *dp83869 = phydev->priv;
> + int delay_size = ARRAY_SIZE(dp83869_internal_delay);
> + int tx_delay = 0;
> + int rx_delay = 0;
> +
> + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID ||
> + phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
> + tx_delay = phy_get_delay_index(phydev,
> + &dp83869_internal_delay[0],
> + delay_size, dp83869->tx_id_delay,
> + false);
> + if (tx_delay < 0) {
> + phydev_err(phydev, "Tx internal delay is invalid\n");
> + return tx_delay;
> + }
> + }
> +
> + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
> + phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
> + rx_delay = phy_get_delay_index(phydev,
> + &dp83869_internal_delay[0],
> + delay_size, dp83869->rx_id_delay,
> + false);
> + if (rx_delay < 0) {
> + phydev_err(phydev, "Rx internal delay is invalid\n");
> + return rx_delay;
> + }
> + }
So any PHY using these properties is going to pretty much reproduce
this code. Meaning is should all be in a helper.
Andrew
Powered by blists - more mailing lists