| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200527054850.2067032-3-bjorn.andersson@linaro.org>
Date: Tue, 26 May 2020 22:48:46 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Ohad Ben-Cohen <ohad@...ery.com>
Cc: Rob Herring <robh+dt@...nel.org>, linux-arm-msm@...r.kernel.org,
linux-remoteproc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Mathieu Poirier <mathieu.poirier@...aro.org>,
Vinod Koul <vkoul@...nel.org>
Subject: [PATCH v6 2/5] remoteproc: qcom: Introduce helper to store pil info in IMEM
A region in IMEM is used to communicate load addresses of remoteproc to
post mortem debug tools. Implement a helper function that can be used to
store this information in order to enable these tools to process
collected ramdumps.
Reviewed-by: Mathieu Poirier <mathieu.poirier@...aro.org>
Reviewed-by: Vinod Koul <vkoul@...nel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
Changes since v5:
- Picked up reviewed-bys
drivers/remoteproc/Kconfig | 3 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/qcom_pil_info.c | 124 +++++++++++++++++++++++++++++
drivers/remoteproc/qcom_pil_info.h | 7 ++
4 files changed, 135 insertions(+)
create mode 100644 drivers/remoteproc/qcom_pil_info.c
create mode 100644 drivers/remoteproc/qcom_pil_info.h
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index c4d1731295eb..f4bd96d1a1a3 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -116,6 +116,9 @@ config KEYSTONE_REMOTEPROC
It's safe to say N here if you're not interested in the Keystone
DSPs or just want to use a bare minimum kernel.
+config QCOM_PIL_INFO
+ tristate
+
config QCOM_RPROC_COMMON
tristate
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index e8b886e511f0..fe398f82d550 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o
obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o
obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o
+obj-$(CONFIG_QCOM_PIL_INFO) += qcom_pil_info.o
obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o
obj-$(CONFIG_QCOM_Q6V5_COMMON) += qcom_q6v5.o
obj-$(CONFIG_QCOM_Q6V5_ADSP) += qcom_q6v5_adsp.o
diff --git a/drivers/remoteproc/qcom_pil_info.c b/drivers/remoteproc/qcom_pil_info.c
new file mode 100644
index 000000000000..0785c7cde2d3
--- /dev/null
+++ b/drivers/remoteproc/qcom_pil_info.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2019-2020 Linaro Ltd.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_address.h>
+
+#define PIL_RELOC_NAME_LEN 8
+
+struct pil_reloc_entry {
+ char name[PIL_RELOC_NAME_LEN];
+ __le64 base;
+ __le32 size;
+} __packed;
+
+struct pil_reloc {
+ struct device *dev;
+ void __iomem *base;
+ size_t num_entries;
+};
+
+static struct pil_reloc _reloc __read_mostly;
+static DEFINE_MUTEX(reloc_mutex);
+
+static int qcom_pil_info_init(void)
+{
+ struct device_node *np;
+ struct resource imem;
+ void __iomem *base;
+ int ret;
+
+ /* Already initialized? */
+ if (_reloc.base)
+ return 0;
+
+ np = of_find_compatible_node(NULL, NULL, "qcom,pil-reloc-info");
+ if (!np)
+ return -ENOENT;
+
+ ret = of_address_to_resource(np, 0, &imem);
+ of_node_put(np);
+ if (ret < 0)
+ return ret;
+
+ base = ioremap(imem.start, resource_size(&imem));
+ if (!base) {
+ pr_err("failed to map PIL relocation info region\n");
+ return -ENOMEM;
+ }
+
+ memset_io(base, 0, resource_size(&imem));
+
+ _reloc.base = base;
+ _reloc.num_entries = resource_size(&imem) / sizeof(struct pil_reloc_entry);
+
+ return 0;
+}
+
+/**
+ * qcom_pil_info_store() - store PIL information of image in IMEM
+ * @image: name of the image
+ * @base: base address of the loaded image
+ * @size: size of the loaded image
+ *
+ * Return: 0 on success, negative errno on failure
+ */
+int qcom_pil_info_store(const char *image, phys_addr_t base, size_t size)
+{
+ char buf[PIL_RELOC_NAME_LEN];
+ void __iomem *entry;
+ int ret;
+ int i;
+
+ mutex_lock(&reloc_mutex);
+ ret = qcom_pil_info_init();
+ if (ret < 0) {
+ mutex_unlock(&reloc_mutex);
+ return ret;
+ }
+
+ for (i = 0; i < _reloc.num_entries; i++) {
+ entry = _reloc.base + i * sizeof(struct pil_reloc_entry);
+
+ memcpy_fromio(buf, entry, PIL_RELOC_NAME_LEN);
+
+ /*
+ * An empty record means we didn't find it, given that the
+ * records are packed.
+ */
+ if (!buf[0])
+ goto found_unused;
+
+ if (!strncmp(buf, image, PIL_RELOC_NAME_LEN))
+ goto found_existing;
+ }
+
+ pr_warn("insufficient PIL info slots\n");
+ mutex_unlock(&reloc_mutex);
+ return -ENOMEM;
+
+found_unused:
+ memcpy_toio(entry, image, PIL_RELOC_NAME_LEN);
+found_existing:
+ writel(base, entry + offsetof(struct pil_reloc_entry, base));
+ writel(size, entry + offsetof(struct pil_reloc_entry, size));
+ mutex_unlock(&reloc_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_pil_info_store);
+
+static void __exit pil_reloc_exit(void)
+{
+ mutex_lock(&reloc_mutex);
+ iounmap(_reloc.base);
+ _reloc.base = NULL;
+ mutex_unlock(&reloc_mutex);
+}
+module_exit(pil_reloc_exit);
+
+MODULE_DESCRIPTION("Qualcomm PIL relocation info");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/remoteproc/qcom_pil_info.h b/drivers/remoteproc/qcom_pil_info.h
new file mode 100644
index 000000000000..1b89a63ba82f
--- /dev/null
+++ b/drivers/remoteproc/qcom_pil_info.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __QCOM_PIL_INFO_H__
+#define __QCOM_PIL_INFO_H__
+
+int qcom_pil_info_store(const char *image, phys_addr_t base, size_t size);
+
+#endif
--
2.26.2
Powered by blists - more mailing lists