lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 27 May 2020 11:42:22 +0300
From:   Andrey Konovalov <andrey.konovalov@...aro.org>
To:     Dave Stevenson <dave.stevenson@...pberrypi.com>
Cc:     Mauro Carvalho Chehab <mchehab@...nel.org>,
        Sakari Ailus <sakari.ailus@....fi>,
        manivannan.sadhasivam@...aro.org,
        Linux Media Mailing List <linux-media@...r.kernel.org>,
        LKML <linux-kernel@...r.kernel.org>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, c.barrett@...mos.com,
        a.brela@...mos.com, Peter Griffin <peter.griffin@...aro.org>
Subject: Re: [PATCH v3 07/10] media: i2c: imx290: Add RAW12 mode support

Hi Dave,

On 26.05.2020 19:05, Dave Stevenson wrote:
> Hi Andrey
> 
> Thanks for the patch.
> 
> On Sun, 24 May 2020 at 20:26, Andrey Konovalov
> <andrey.konovalov@...aro.org> wrote:
>>
>> From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
>>
>> IMX290 is capable of outputting frames in both Raw Bayer (packed) 10 and
>> 12 bit formats. Since the driver already supports RAW10 mode, let's add
>> the missing RAW12 mode as well.
>>
>> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
>> Signed-off-by: Andrey Konovalov <andrey.konovalov@...aro.org>
>> ---
>>   drivers/media/i2c/imx290.c | 36 +++++++++++++++++++++++++++++++++---
>>   1 file changed, 33 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
>> index 162c345fffac..6e70ff22bc5f 100644
>> --- a/drivers/media/i2c/imx290.c
>> +++ b/drivers/media/i2c/imx290.c
>> @@ -71,6 +71,7 @@ struct imx290 {
>>          struct clk *xclk;
>>          struct regmap *regmap;
>>          u8 nlanes;
>> +       u8 bpp;
>>
>>          struct v4l2_subdev sd;
>>          struct v4l2_fwnode_endpoint ep;
>> @@ -90,10 +91,12 @@ struct imx290 {
>>
>>   struct imx290_pixfmt {
>>          u32 code;
>> +       u8 bpp;
>>   };
>>
>>   static const struct imx290_pixfmt imx290_formats[] = {
>> -       { MEDIA_BUS_FMT_SRGGB10_1X10 },
>> +       { MEDIA_BUS_FMT_SRGGB10_1X10, 10 },
>> +       { MEDIA_BUS_FMT_SRGGB12_1X12, 12 },
>>   };
>>
>>   static const struct regmap_config imx290_regmap_config = {
>> @@ -261,6 +264,18 @@ static const struct imx290_regval imx290_10bit_settings[] = {
>>          { 0x300b, 0x00},
>>   };
>>
>> +static const struct imx290_regval imx290_12bit_settings[] = {
>> +       { 0x3005, 0x01 },
>> +       { 0x3046, 0x01 },
>> +       { 0x3129, 0x00 },
>> +       { 0x317c, 0x00 },
>> +       { 0x31ec, 0x0e },
>> +       { 0x3441, 0x0c },
>> +       { 0x3442, 0x0c },
>> +       { 0x300a, 0xf0 },
>> +       { 0x300b, 0x00 },
>> +};
>> +
>>   /* supported link frequencies */
>>   static const s64 imx290_link_freq_2lanes[] = {
>>          891000000, /* 1920x1080 -  2 lane */
>> @@ -421,7 +436,12 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
>>                  } else {
>>                          imx290_write_reg(imx290, IMX290_PGCTRL, 0x00);
>>                          msleep(10);
>> -                       imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW, 0x3c);
>> +                       if (imx290->bpp == 10)
>> +                               imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW,
>> +                                                0x3c);
>> +                       else /* 12 bits per pixel */
>> +                               imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW,
>> +                                                0xf0);
>>                          imx290_write_reg(imx290, IMX290_BLKLEVEL_HIGH, 0x00);
>>                  }
>>                  break;
>> @@ -496,7 +516,7 @@ static u64 imx290_calc_pixel_rate(struct imx290 *imx290)
>>          u8 nlanes = imx290->nlanes;
>>
>>          /* pixel rate = link_freq * 2 * nr_of_lanes / bits_per_sample */
>> -       return (link_freq * 2 * nlanes / 10);
>> +       return (link_freq * 2 * nlanes / imx290->bpp);
> 
> This doesn't link on a 32bit system as it's a 64bit divide:
> ERROR: "__aeabi_ldivmod" [drivers/media/i2c/imx290.ko] undefined!
> It ought to be using do_div().

Nice catch, thanks!
I'll fix this in the next version of the patchset.

Thanks,
Andrey

> Admittedly it didn't compile before as you still had a s64 divide by
> 10, but I hadn't tried that :-)
> 
>    Dave
> 
>>   }
>>
>>   static int imx290_set_fmt(struct v4l2_subdev *sd,
>> @@ -533,6 +553,7 @@ static int imx290_set_fmt(struct v4l2_subdev *sd,
>>          } else {
>>                  format = &imx290->current_format;
>>                  imx290->current_mode = mode;
>> +               imx290->bpp = imx290_formats[i].bpp;
>>
>>                  if (imx290->link_freq)
>>                          __v4l2_ctrl_s_ctrl(imx290->link_freq,
>> @@ -577,6 +598,15 @@ static int imx290_write_current_format(struct imx290 *imx290)
>>                          return ret;
>>                  }
>>                  break;
>> +       case MEDIA_BUS_FMT_SRGGB12_1X12:
>> +               ret = imx290_set_register_array(imx290, imx290_12bit_settings,
>> +                                               ARRAY_SIZE(
>> +                                                       imx290_12bit_settings));
>> +               if (ret < 0) {
>> +                       dev_err(imx290->dev, "Could not set format registers\n");
>> +                       return ret;
>> +               }
>> +               break;
>>          default:
>>                  dev_err(imx290->dev, "Unknown pixel format\n");
>>                  return -EINVAL;
>> --
>> 2.17.1
>>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ