linux-kernel - Re: [PATCH] mtd: rawnand: arasan: select CONFIG

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200527155304.0cf42848@xps13>
Date:   Wed, 27 May 2020 15:53:04 +0200
From:   Miquel Raynal <miquel.raynal@...tlin.com>
To:     Arnd Bergmann <arnd@...db.de>
Cc:     Richard Weinberger <richard@....at>,
        Vignesh Raghavendra <vigneshr@...com>,
        Boris Brezillon <boris.brezillon@...labora.com>,
        Brendan Higgins <brendanhiggins@...gle.com>,
        Piotr Sroka <piotrs@...ence.com>,
        Mason Yang <masonccyang@...c.com.tw>,
        linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] mtd: rawnand: arasan: select CONFIG_BCH

Hi Arnd,

Arnd Bergmann <arnd@...db.de> wrote on Wed, 27 May 2020 15:42:03 +0200:

> Like several other nand flash drivers, this one requires the BCH
> library to be selected from Kconfig.

Actually most of the time these drivers do not depend on BCH directly.
Here it is a bit particular: the hardware ECC engine logic being
broken, I found a workaround by using BCH's library functions directly
to verify the hardware correctness.

Anyway, thank you very much for the fix but if I didn't make a mistake
it should have been fixed yesterday night already, so it's probably not
in linux-next yet.

> arm-linux-gnueabi-ld: drivers/mtd/nand/raw/arasan-nand-controller.o: in function `anfc_attach_chip':
> arasan-nand-controller.c:(.text+0x894): undefined reference to `bch_init'
> arm-linux-gnueabi-ld: drivers/mtd/nand/raw/arasan-nand-controller.o: in function `anfc_detach_chip':
> arasan-nand-controller.c:(.text+0x98c): undefined reference to `bch_free'
> arm-linux-gnueabi-ld: drivers/mtd/nand/raw/arasan-nand-controller.o: in function `anfc_read_page_hw_ecc':
> arasan-nand-controller.c:(.text+0x1080): undefined reference to `bch_decode'
> 
> Fixes: 197b88fecc50 ("mtd: rawnand: arasan: Add new Arasan NAND controller")
> Signed-off-by: Arnd Bergmann <arnd@...db.de>
> ---
>  drivers/mtd/nand/raw/Kconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
> index e2bc87779bf9..113f61052269 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -456,6 +456,7 @@ config MTD_NAND_CADENCE
>  config MTD_NAND_ARASAN
>  	tristate "Support for Arasan NAND flash controller"
>  	depends on HAS_IOMEM && HAS_DMA
> +	select BCH
>  	help
>  	  Enables the driver for the Arasan NAND flash controller on
>  	  Zynq Ultrascale+ MPSoC.

Thanks,
Miquèl