| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200528142805.29115-2-Sergey.Semin@baikalelectronics.ru>
Date: Thu, 28 May 2020 17:28:03 +0300
From: Serge Semin <Sergey.Semin@...kalelectronics.ru>
To: Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Rob Herring <robh+dt@...nel.org>
CC: Serge Semin <Sergey.Semin@...kalelectronics.ru>,
Serge Semin <fancer.lancer@...il.com>,
Maxim Kaurkin <maxim.kaurkin@...kalelectronics.ru>,
Rob Herring <robh@...nel.org>,
Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Arnd Bergmann <arnd@...db.de>, <linux-mips@...r.kernel.org>,
<linux-hwmon@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v4 1/3] dt-bindings: hwmon: Add Baikal-T1 PVT sensor binding
Baikal-T1 SoC is equipped with an embedded process, voltage and
temperature sensor to monitor the chip internal environment like
temperature, supply voltage and transistors performance.
This bindings describes the external Baikal-T1 PVT control interfaces
like MMIO registers space, interrupt request number and clocks source.
These are then used by the corresponding hwmon device driver to
implement the sysfs files-based access to the sensors functionality.
Co-developed-by: Maxim Kaurkin <maxim.kaurkin@...kalelectronics.ru>
Signed-off-by: Maxim Kaurkin <maxim.kaurkin@...kalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
Reviewed-by: Rob Herring <robh@...nel.org>
Cc: Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc: Arnd Bergmann <arnd@...db.de>
Cc: linux-mips@...r.kernel.org
---
Changelog v2:
- Lowercase the node-name in the example.
- Add dual-license header.
- Don't use a multi-arg clock phandle reference in the examples dt-binding
property. Thus reundant include pre-processor statement can be removed.
- Replace "additionalProperties: false" property with
"unevaluatedProperties: false".
- Discard label definition from the example.
- Align settings of the "#thermal-sensor-cells" property with two spaces
ahead of the property line start.
Changelog v3:
- Add "baikal,pvt-temp-trim-millicelsius" property support.
Changelog v4:
- Rename the "baikal,pvt-temp-trim-millicelsius" property to
"baikal,pvt-temp-offset-millicelsius".
---
.../bindings/hwmon/baikal,bt1-pvt.yaml | 107 ++++++++++++++++++
1 file changed, 107 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
new file mode 100644
index 000000000000..84ae4cdd08ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/baikal,bt1-pvt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 PVT Sensor
+
+maintainers:
+ - Serge Semin <fancer.lancer@...il.com>
+
+description: |
+ Baikal-T1 SoC provides an embedded process, voltage and temperature
+ sensor to monitor an internal SoC environment (chip temperature, supply
+ voltage and process monitor) and on time detect critical situations,
+ which may cause the system instability and even damages. The IP-block
+ is based on the Analog Bits PVT sensor, but is equipped with a dedicated
+ control wrapper, which provides a MMIO registers-based access to the
+ sensor core functionality (APB3-bus based) and exposes an additional
+ functions like thresholds/data ready interrupts, its status and masks,
+ measurements timeout. Its internal structure is depicted on the next
+ diagram:
+
+ Analog Bits core Bakal-T1 PVT control block
+ +--------------------+ +------------------------+
+ | Temperature sensor |-+ +------| Sensors control |
+ |--------------------| |<---En---| |------------------------|
+ | Voltage sensor |-|<--Mode--| +--->| Sampled data |
+ |--------------------| |<--Trim--+ | |------------------------|
+ | Low-Vt sensor |-| | +--| Thresholds comparator |
+ |--------------------| |---Data----| | |------------------------|
+ | High-Vt sensor |-| | +->| Interrupts status |
+ |--------------------| |--Valid--+-+ | |------------------------|
+ | Standard-Vt sensor |-+ +---+--| Interrupts mask |
+ +--------------------+ |------------------------|
+ ^ | Interrupts timeout |
+ | +------------------------+
+ | ^ ^
+ Rclk-----+----------------------------------------+ |
+ APB3-------------------------------------------------+
+
+ This bindings describes the external Baikal-T1 PVT control interfaces
+ like MMIO registers space, interrupt request number and clocks source.
+ These are then used by the corresponding hwmon device driver to
+ implement the sysfs files-based access to the sensors functionality.
+
+properties:
+ compatible:
+ const: baikal,bt1-pvt
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: PVT reference clock
+ - description: APB3 interface clock
+
+ clock-names:
+ items:
+ - const: ref
+ - const: pclk
+
+ "#thermal-sensor-cells":
+ description: Baikal-T1 can be referenced as the CPU thermal-sensor
+ const: 0
+
+ baikal,pvt-temp-offset-millicelsius:
+ description: |
+ Temperature sensor trimming factor. It can be used to manually adjust the
+ temperature measurements within 7.130 degrees Celsius.
+ maxItems: 1
+ items:
+ default: 0
+ minimum: 0
+ maximum: 7130
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+ pvt@...00000 {
+ compatible = "baikal,bt1-pvt";
+ reg = <0x1f200000 0x1000>;
+ #thermal-sensor-cells = <0>;
+
+ interrupts = <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>;
+
+ baikal,pvt-temp-trim-millicelsius = <1000>;
+
+ clocks = <&ccu_sys>, <&ccu_sys>;
+ clock-names = "ref", "pclk";
+ };
+...
--
2.26.2
Powered by blists - more mailing lists