[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200528151245.7592-7-vadym.kochan@plvision.eu>
Date: Thu, 28 May 2020 18:12:45 +0300
From: Vadym Kochan <vadym.kochan@...ision.eu>
To: "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Jiri Pirko <jiri@...lanox.com>,
Ido Schimmel <idosch@...lanox.com>,
Andrew Lunn <andrew@...n.ch>,
Oleksandr Mazur <oleksandr.mazur@...ision.eu>,
Serhiy Boiko <serhiy.boiko@...ision.eu>,
Serhiy Pshyk <serhiy.pshyk@...ision.eu>,
Volodymyr Mytnyk <volodymyr.mytnyk@...ision.eu>,
Taras Chornyi <taras.chornyi@...ision.eu>,
Andrii Savka <andrii.savka@...ision.eu>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Mickey Rachamim <mickeyr@...vell.com>,
Vadym Kochan <vadym.kochan@...ision.eu>
Subject: [net-next 6/6] dt-bindings: marvell,prestera: Add description for device-tree bindings
Add brief description how to configure base mac address binding in
device-tree.
Describe requirement for the PCI port which is connected to the ASIC, to
allow access to the firmware related registers.
Signed-off-by: Vadym Kochan <vadym.kochan@...ision.eu>
---
.../bindings/net/marvell,prestera.txt | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt
index 83370ebf5b89..e28938ddfdf5 100644
--- a/Documentation/devicetree/bindings/net/marvell,prestera.txt
+++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt
@@ -45,3 +45,37 @@ dfx-server {
ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
};
+
+Marvell Prestera SwitchDev bindings
+-----------------------------------
+Optional properties:
+- compatible: must be "marvell,prestera"
+- base-mac-provider: describes handle to node which provides base mac address,
+ might be a static base mac address or nvme cell provider.
+
+Example:
+
+eeprom_mac_addr: eeprom-mac-addr {
+ compatible = "eeprom,mac-addr-cell";
+ status = "okay";
+
+ nvmem = <&eeprom_at24>;
+};
+
+prestera {
+ compatible = "marvell,prestera";
+ status = "okay";
+
+ base-mac-provider = <&eeprom_mac_addr>;
+};
+
+The current implementation of Prestera Switchdev PCI interface driver requires
+that BAR2 is assigned to 0xf6000000 as base address from the PCI IO range:
+
+&cp0_pcie0 {
+ ranges = <0x81000000 0x0 0xfb000000 0x0 0xfb000000 0x0 0xf0000
+ 0x82000000 0x0 0xf6000000 0x0 0xf6000000 0x0 0x2000000
+ 0x82000000 0x0 0xf9000000 0x0 0xf9000000 0x0 0x100000>;
+ phys = <&cp0_comphy0 0>;
+ status = "okay";
+};
--
2.17.1
Powered by blists - more mailing lists