| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1590650879-18288-4-git-send-email-Anson.Huang@nxp.com>
Date: Thu, 28 May 2020 15:27:53 +0800
From: Anson Huang <Anson.Huang@....com>
To: mturquette@...libre.com, sboyd@...nel.org, robh+dt@...nel.org,
shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
festevam@...il.com, shc_work@...l.ru, s.trumtrar@...gutronix.de,
linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: Linux-imx@....com
Subject: [PATCH 3/9] dt-bindings: clock: Convert i.MX31 clock to json-schema
Convert the i.MX31 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@....com>
---
.../devicetree/bindings/clock/imx31-clock.txt | 90 ----------------
.../devicetree/bindings/clock/imx31-clock.yaml | 118 +++++++++++++++++++++
2 files changed, 118 insertions(+), 90 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx31-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx31-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.txt b/Documentation/devicetree/bindings/clock/imx31-clock.txt
deleted file mode 100644
index 0a29109..0000000
--- a/Documentation/devicetree/bindings/clock/imx31-clock.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-* Clock bindings for Freescale i.MX31
-
-Required properties:
-- compatible: Should be "fsl,imx31-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX31
-clocks and IDs.
-
- Clock ID
- -----------------------
- dummy 0
- ckih 1
- ckil 2
- mpll 3
- spll 4
- upll 5
- mcu_main 6
- hsp 7
- ahb 8
- nfc 9
- ipg 10
- per_div 11
- per 12
- csi_sel 13
- fir_sel 14
- csi_div 15
- usb_div_pre 16
- usb_div_post 17
- fir_div_pre 18
- fir_div_post 19
- sdhc1_gate 20
- sdhc2_gate 21
- gpt_gate 22
- epit1_gate 23
- epit2_gate 24
- iim_gate 25
- ata_gate 26
- sdma_gate 27
- cspi3_gate 28
- rng_gate 29
- uart1_gate 30
- uart2_gate 31
- ssi1_gate 32
- i2c1_gate 33
- i2c2_gate 34
- i2c3_gate 35
- hantro_gate 36
- mstick1_gate 37
- mstick2_gate 38
- csi_gate 39
- rtc_gate 40
- wdog_gate 41
- pwm_gate 42
- sim_gate 43
- ect_gate 44
- usb_gate 45
- kpp_gate 46
- ipu_gate 47
- uart3_gate 48
- uart4_gate 49
- uart5_gate 50
- owire_gate 51
- ssi2_gate 52
- cspi1_gate 53
- cspi2_gate 54
- gacc_gate 55
- emi_gate 56
- rtic_gate 57
- firi_gate 58
-
-Examples:
-
-clks: ccm@...80000{
- compatible = "fsl,imx31-ccm";
- reg = <0x53f80000 0x4000>;
- interrupts = <31>, <53>;
- #clock-cells = <1>;
-};
-
-uart1: serial@...90000 {
- compatible = "fsl,imx31-uart", "fsl,imx21-uart";
- reg = <0x43f90000 0x4000>;
- interrupts = <45>;
- clocks = <&clks 10>, <&clks 30>;
- clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
new file mode 100644
index 0000000..2d9220e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx31-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX31
+
+maintainers:
+ - Fabio Estevam <fabio.estevam@...escale.com>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. The following is a full list of i.MX31
+ clocks and IDs.
+
+ Clock ID
+ -----------------------
+ dummy 0
+ ckih 1
+ ckil 2
+ mpll 3
+ spll 4
+ upll 5
+ mcu_main 6
+ hsp 7
+ ahb 8
+ nfc 9
+ ipg 10
+ per_div 11
+ per 12
+ csi_sel 13
+ fir_sel 14
+ csi_div 15
+ usb_div_pre 16
+ usb_div_post 17
+ fir_div_pre 18
+ fir_div_post 19
+ sdhc1_gate 20
+ sdhc2_gate 21
+ gpt_gate 22
+ epit1_gate 23
+ epit2_gate 24
+ iim_gate 25
+ ata_gate 26
+ sdma_gate 27
+ cspi3_gate 28
+ rng_gate 29
+ uart1_gate 30
+ uart2_gate 31
+ ssi1_gate 32
+ i2c1_gate 33
+ i2c2_gate 34
+ i2c3_gate 35
+ hantro_gate 36
+ mstick1_gate 37
+ mstick2_gate 38
+ csi_gate 39
+ rtc_gate 40
+ wdog_gate 41
+ pwm_gate 42
+ sim_gate 43
+ ect_gate 44
+ usb_gate 45
+ kpp_gate 46
+ ipu_gate 47
+ uart3_gate 48
+ uart4_gate 49
+ uart5_gate 50
+ owire_gate 51
+ ssi2_gate 52
+ cspi1_gate 53
+ cspi2_gate 54
+ gacc_gate 55
+ emi_gate 56
+ rtic_gate 57
+ firi_gate 58
+
+properties:
+ compatible:
+ const: fsl,imx31-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for DVFS when a frequency change is requested, request 2 is
+ to generate interrupt for DPTC when a voltage change is requested.
+ items:
+ - description: CCM DVFS interrupt request 1
+ - description: CCM DPTC interrupt request 2
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+examples:
+ - |
+ clock-controller@...80000 {
+ compatible = "fsl,imx31-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>, <53>;
+ #clock-cells = <1>;
+ };
+
+ serial@...90000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ clocks = <&clks 10>, <&clks 30>;
+ clock-names = "ipg", "per";
+ };
--
2.7.4
Powered by blists - more mailing lists