linux-kernel - [PATCH 1/3] ARM: dts: stm32: update uart4 pin configuration for low power on stm32mp157

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200528073853.24759-2-erwan.leray@st.com>
Date:   Thu, 28 May 2020 09:38:51 +0200
From:   Erwan Le Ray <erwan.leray@...com>
To:     Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>
CC:     <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Erwan Le Ray <erwan.leray@...com>,
        Fabrice Gasnier <fabrice.gasnier@...com>,
        Bich Hemon <bich.hemon@...com>
Subject: [PATCH 1/3] ARM: dts: stm32: update uart4 pin configuration for low power on stm32mp157

Sleep pin configuration is refined for low power modes:
- "sleep" (no wakeup & console suspend enabled): put pins in analog state
  to optimize power
- "idle" (wakeup capability): keep Rx pin in alternate function

Signed-off-by: Bich Hemon <bich.hemon@...com>
Signed-off-by: Erwan Le Ray <erwan.leray@...com>

diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 7eb858732d6d..7cf535dc05f5 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1648,6 +1648,23 @@
 		};
 	};
 
+	uart4_idle_pins_a: uart4-idle-0 {
+		   pins1 {
+			 pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+		   };
+		   pins2 {
+			 pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			 bias-disable;
+		   };
+	};
+
+	uart4_sleep_pins_a: uart4-sleep-0 {
+		   pins {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+		    };
+	};
+
 	uart4_pins_b: uart4-1 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
-- 
2.17.1