linux-kernel - Re: [PATCH v4] bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <00A6B08C-CFDB-43A1-B813-CE3DF241FF33@holtmann.org>
Date:   Thu, 28 May 2020 10:19:53 +0200
From:   Marcel Holtmann <marcel@...tmann.org>
To:     Zijun Hu <zijuhu@...eaurora.org>
Cc:     Johan Hedberg <johan.hedberg@...il.com>,
        linux-kernel@...r.kernel.org, linux-bluetooth@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, bgodavar@...eaurora.org,
        c-hbandi@...eaurora.org, hemantg@...eaurora.org, mka@...omium.org,
        rjliao@...eaurora.org
Subject: Re: [PATCH v4] bluetooth: hci_qca: Fix qca6390 enable failure after
 warm reboot

Hi Zijun,

> Warm reboot can not restore qca6390 controller baudrate
> to default due to lack of controllable BT_EN pin or power
> supply, so fails to download firmware after warm reboot.
> 
> Fixed by sending EDL_SOC_RESET VSC to reset controller
> within added device shutdown implementation.
> 
> Signed-off-by: Zijun Hu <zijuhu@...eaurora.org>
> ---
> drivers/bluetooth/hci_qca.c | 33 +++++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
> 
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index e4a6823..8e03bfe 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1975,6 +1975,38 @@ static void qca_serdev_remove(struct serdev_device *serdev)
> 	hci_uart_unregister_device(&qcadev->serdev_hu);
> }
> 
> +static void qca_serdev_shutdown(struct device *dev)
> +{
> +	int ret;
> +	int timeout = msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS);
> +	struct serdev_device *serdev = to_serdev_device(dev);
> +	struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
> +	const u8 ibs_wake_cmd[] = { 0xFD };
> +	const u8 edl_reset_soc_cmd[] = { 0x01, 0x00, 0xFC, 0x01, 0x05 };

struct hci_dev *hdev = container_of(dev, struct hci_dev, dev);

> +
> +	if (qcadev->btsoc_type == QCA_QCA6390) {
> +		serdev_device_write_flush(serdev);
> +		ret = serdev_device_write_buf(serdev,
> +				ibs_wake_cmd, sizeof(ibs_wake_cmd));
> +		if (ret < 0) {
> +			BT_ERR("QCA send IBS_WAKE_IND error: %d", ret);

And then use bt_dev_err here.

> +			return;
> +		}
> +		serdev_device_wait_until_sent(serdev, timeout);
> +		usleep_range(8000, 10000);
> +
> +		serdev_device_write_flush(serdev);
> +		ret = serdev_device_write_buf(serdev,
> +				edl_reset_soc_cmd, sizeof(edl_reset_soc_cmd));
> +		if (ret < 0) {
> +			BT_ERR("QCA send EDL_RESET_REQ error: %d", ret);
> +			return;
> +		}
> +		serdev_device_wait_until_sent(serdev, timeout);
> +		usleep_range(8000, 10000);
> +	}
> +}
> +
> static int __maybe_unused qca_suspend(struct device *dev)
> {
> 	struct hci_dev *hdev = container_of(dev, struct hci_dev, dev);
> @@ -2100,6 +2132,7 @@ static struct serdev_device_driver qca_serdev_driver = {
> 		.name = "hci_uart_qca",
> 		.of_match_table = of_match_ptr(qca_bluetooth_of_match),
> 		.acpi_match_table = ACPI_PTR(qca_bluetooth_acpi_match),
> +		.shutdown = qca_serdev_shutdown,
> 		.pm = &qca_pm_ops,
> 	},
> };

Regards

Marcel