[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200528135312.GA4156923@bogus>
Date: Thu, 28 May 2020 07:53:12 -0600
From: Rob Herring <robh@...nel.org>
To: Ricardo Rivera-Matos <r-rivera-matos@...com>
Cc: dmurphy@...com, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, sspatil@...roid.com,
devicetree@...r.kernel.org, afd@...com, sre@...nel.org,
pali@...nel.org
Subject: Re: [PATCH v10 3/4] dt-bindings: power: Add the bindings for the
bq2515x family of chargers.
On Wed, 27 May 2020 18:17:42 -0500, Ricardo Rivera-Matos wrote:
> The BQ2515X family of devices are highly integrated battery management
> ICs that integrate the most common functions for wearable devices
> namely a charger, an output voltage rail, ADC for battery and system
> monitoring, and a push-button controller.
>
> Datasheets:
> http://www.ti.com/lit/ds/symlink/bq25150.pdf
> http://www.ti.com/lit/ds/symlink/bq25155.pdf
>
> Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@...com>
> ---
> .../bindings/power/supply/bq2515x.yaml | 91 +++++++++++++++++++
> 1 file changed, 91 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/supply/bq2515x.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/supply/bq2515x.example.dt.yaml: charger@6b: 'low-power-gpios' does not match any of the regexes: 'pinctrl-[0-9]+'
See https://patchwork.ozlabs.org/patch/1299261
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.
Powered by blists - more mailing lists