[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200529193315.GA2807797@bogus>
Date: Fri, 29 May 2020 13:33:15 -0600
From: Rob Herring <robh@...nel.org>
To: Florian Fainelli <f.fainelli@...il.com>
Cc: linux-kernel@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
"maintainer:BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE..."
<bcm-kernel-feedback-list@...adcom.com>,
Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
Stefan Wahren <stefan.wahren@...e.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Matti Vaittinen <matti.vaittinen@...rohmeurope.com>,
"open list:PIN CONTROL SUBSYSTEM" <linux-gpio@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE"
<linux-rpi-kernel@...ts.infradead.org>,
"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 2/4] dt-bindings: pinctrl: Document optional BCM7211
wake-up interrupts
On Thu, May 28, 2020 at 12:21:10PM -0700, Florian Fainelli wrote:
> BCM7211 supports wake-up interrupts in the form of optional interrupt
> lines, one per bank, plus the "all banks" interrupt line.
>
> Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
> ---
> .../devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
> index dfc67b90591c..5682b2010e50 100644
> --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
> @@ -16,7 +16,9 @@ Required properties:
> second cell is used to specify optional parameters:
> - bit 0 specifies polarity (0 for normal, 1 for inverted)
> - interrupts : The interrupt outputs from the controller. One interrupt per
> - individual bank followed by the "all banks" interrupt.
> + individual bank followed by the "all banks" interrupt. For BCM7211, an
> + additional set of per-bank interrupt line and an "all banks" wake-up
> + interrupt may be specified.
Is 'all banks' the name? Generally 'wakeup' is used for a wake up irq.
Rob
Powered by blists - more mailing lists