linux-kernel - Re: [PATCH] arm64: dts: qcom: sm8250: use dt-bindings defines for clocks

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20200529032248.GC279327@builder.lan>
Date:   Thu, 28 May 2020 20:22:48 -0700
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Jonathan Marek <jonathan@...ek.ca>
Cc:     linux-arm-msm@...r.kernel.org, Andy Gross <agross@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] arm64: dts: qcom: sm8250: use dt-bindings defines for
 clocks

On Sat 23 May 06:12 PDT 2020, Jonathan Marek wrote:

> Use the dt-bindings defines for qupv3_id_1 node's clocks.
> 

Applied

Thanks,
Bjorn

> Signed-off-by: Jonathan Marek <jonathan@...ek.ca>
> ---
>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 9c210fbac65e..04c9c215ffcd 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -292,7 +292,8 @@ qupv3_id_1: geniqup@...000 {
>  			compatible = "qcom,geni-se-qup";
>  			reg = <0x0 0x00ac0000 0x0 0x6000>;
>  			clock-names = "m-ahb", "s-ahb";
> -			clocks = <&gcc 133>, <&gcc 134>;
> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> +				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
>  			#address-cells = <2>;
>  			#size-cells = <2>;
>  			ranges;
> @@ -302,7 +303,7 @@ uart2: serial@...000 {
>  				compatible = "qcom,geni-debug-uart";
>  				reg = <0x0 0x00a90000 0x0 0x4000>;
>  				clock-names = "se";
> -				clocks = <&gcc 113>;
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>  				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>  				status = "disabled";
>  			};
> -- 
> 2.26.1
>