| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200529033720.GE279327@builder.lan>
Date: Thu, 28 May 2020 20:37:20 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Jonathan Marek <jonathan@...ek.ca>
Cc: linux-arm-msm@...r.kernel.org, Andy Gross <agross@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] arm64: dts: qcom: sm8250: sort nodes by physical address
On Sat 23 May 06:22 PDT 2020, Jonathan Marek wrote:
> Other dts have nodes sorted by physical address, be consistent with that.
>
This didn't apply cleanly, because we haven't yet migrated the hwlock to
the yet to be approved binding and I don't have a usb node.
I resolved it and applied the patch.
Thanks,
Bjorn
> Signed-off-by: Jonathan Marek <jonathan@...ek.ca>
> ---
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 176 +++++++++++++--------------
> 1 file changed, 88 insertions(+), 88 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index a273b99bf1e6..bc8a14df60e5 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -379,6 +379,12 @@ ufs_mem_phy_lanes: lanes@...7400 {
> };
> };
>
> + tcsr_mutex: hwlock@...0000 {
> + compatible = "qcom,tcsr-mutex";
> + reg = <0x0 0x01f40000 0x0 0x40000>;
> + #hwlock-cells = <1>;
> + };
> +
> usb_1_hsphy: phy@...3000 {
> compatible = "qcom,sm8250-usb-hs-phy",
> "qcom,usb-snps-hs-7nm-phy";
> @@ -559,15 +565,6 @@ usb_2_dwc3: dwc3@...0000 {
> };
> };
>
> - intc: interrupt-controller@...00000 {
> - compatible = "arm,gic-v3";
> - #interrupt-cells = <3>;
> - interrupt-controller;
> - reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
> - <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
> - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> - };
> -
> pdc: interrupt-controller@...0000 {
> compatible = "qcom,sm8250-pdc", "qcom,pdc";
> reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
> @@ -596,85 +593,6 @@ spmi_bus: qcom,spmi@...0000 {
> #interrupt-cells = <4>;
> };
>
> - apps_rsc: rsc@...00000 {
> - label = "apps_rsc";
> - compatible = "qcom,rpmh-rsc";
> - reg = <0x0 0x18200000 0x0 0x10000>,
> - <0x0 0x18210000 0x0 0x10000>,
> - <0x0 0x18220000 0x0 0x10000>;
> - reg-names = "drv-0", "drv-1", "drv-2";
> - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> - qcom,tcs-offset = <0xd00>;
> - qcom,drv-id = <2>;
> - qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> - <WAKE_TCS 3>, <CONTROL_TCS 1>;
> -
> - rpmhcc: clock-controller {
> - compatible = "qcom,sm8250-rpmh-clk";
> - #clock-cells = <1>;
> - clock-names = "xo";
> - clocks = <&xo_board>;
> - };
> -
> - rpmhpd: power-controller {
> - compatible = "qcom,sm8250-rpmhpd";
> - #power-domain-cells = <1>;
> - operating-points-v2 = <&rpmhpd_opp_table>;
> -
> - rpmhpd_opp_table: opp-table {
> - compatible = "operating-points-v2";
> -
> - rpmhpd_opp_ret: opp1 {
> - opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> - };
> -
> - rpmhpd_opp_min_svs: opp2 {
> - opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> - };
> -
> - rpmhpd_opp_low_svs: opp3 {
> - opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> - };
> -
> - rpmhpd_opp_svs: opp4 {
> - opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> - };
> -
> - rpmhpd_opp_svs_l1: opp5 {
> - opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> - };
> -
> - rpmhpd_opp_nom: opp6 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> - };
> -
> - rpmhpd_opp_nom_l1: opp7 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> - };
> -
> - rpmhpd_opp_nom_l2: opp8 {
> - opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> - };
> -
> - rpmhpd_opp_turbo: opp9 {
> - opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> - };
> -
> - rpmhpd_opp_turbo_l1: opp10 {
> - opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> - };
> - };
> - };
> - };
> -
> - tcsr_mutex: hwlock@...0000 {
> - compatible = "qcom,tcsr-mutex";
> - reg = <0x0 0x01f40000 0x0 0x40000>;
> - #hwlock-cells = <1>;
> - };
> -
> tlmm: pinctrl@...0000 {
> compatible = "qcom,sm8250-pinctrl";
> reg = <0 0x0f100000 0 0x300000>,
> @@ -690,6 +608,15 @@ tlmm: pinctrl@...0000 {
> wakeup-parent = <&pdc>;
> };
>
> + intc: interrupt-controller@...00000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
> + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> timer@...20000 {
> #address-cells = <2>;
> #size-cells = <2>;
> @@ -749,6 +676,79 @@ frame@...2d000 {
> };
> };
>
> + apps_rsc: rsc@...00000 {
> + label = "apps_rsc";
> + compatible = "qcom,rpmh-rsc";
> + reg = <0x0 0x18200000 0x0 0x10000>,
> + <0x0 0x18210000 0x0 0x10000>,
> + <0x0 0x18220000 0x0 0x10000>;
> + reg-names = "drv-0", "drv-1", "drv-2";
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,tcs-offset = <0xd00>;
> + qcom,drv-id = <2>;
> + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> + <WAKE_TCS 3>, <CONTROL_TCS 1>;
> +
> + rpmhcc: clock-controller {
> + compatible = "qcom,sm8250-rpmh-clk";
> + #clock-cells = <1>;
> + clock-names = "xo";
> + clocks = <&xo_board>;
> + };
> +
> + rpmhpd: power-controller {
> + compatible = "qcom,sm8250-rpmhpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmhpd_opp_table>;
> +
> + rpmhpd_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + rpmhpd_opp_ret: opp1 {
> + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> + };
> +
> + rpmhpd_opp_min_svs: opp2 {
> + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> + };
> +
> + rpmhpd_opp_low_svs: opp3 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> + };
> +
> + rpmhpd_opp_svs: opp4 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> + };
> +
> + rpmhpd_opp_svs_l1: opp5 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> + };
> +
> + rpmhpd_opp_nom: opp6 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> + };
> +
> + rpmhpd_opp_nom_l1: opp7 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> + };
> +
> + rpmhpd_opp_nom_l2: opp8 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> + };
> +
> + rpmhpd_opp_turbo: opp9 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> + };
> +
> + rpmhpd_opp_turbo_l1: opp10 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> + };
> + };
> + };
> + };
> +
> cpufreq_hw: cpufreq@...91000 {
> compatible = "qcom,cpufreq-hw";
> reg = <0 0x18591000 0 0x1000>,
> --
> 2.26.1
>
Powered by blists - more mailing lists