[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200529035915.20790-2-Sergey.Semin@baikalelectronics.ru>
Date: Fri, 29 May 2020 06:58:59 +0300
From: Serge Semin <Sergey.Semin@...kalelectronics.ru>
To: Mark Brown <broonie@...nel.org>
CC: Serge Semin <Sergey.Semin@...kalelectronics.ru>,
Serge Semin <fancer.lancer@...il.com>,
Georgy Vlasov <Georgy.Vlasov@...kalelectronics.ru>,
Ramil Zaripov <Ramil.Zaripov@...kalelectronics.ru>,
Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Arnd Bergmann <arnd@...db.de>, Feng Tang <feng.tang@...el.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Rob Herring <robh+dt@...nel.org>, <linux-mips@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-spi@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v5 01/16] spi: dw: Set xfer effective_speed_hz
Seeing DW APB SSI controller doesn't support setting the exactly
requested SPI bus frequency, but only a rounded frequency determined
by means of the odd-numbered half-worded reference clock divider,
it would be good tune the SPI core up and initialize the current
transfer effective_speed_hz. By doing so the core will be able to
execute the xfer-related delays with better accuracy.
Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
Cc: Georgy Vlasov <Georgy.Vlasov@...kalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@...kalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc: Arnd Bergmann <arnd@...db.de>
Cc: Feng Tang <feng.tang@...el.com>
Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: linux-mips@...r.kernel.org
Cc: devicetree@...r.kernel.org
---
drivers/spi/spi-dw.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 9d6904d30104..050cb2ea0812 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -352,6 +352,7 @@ static int dw_spi_transfer_one(struct spi_controller *master,
spi_set_clk(dws, chip->clk_div);
}
+ transfer->effective_speed_hz = dws->max_freq / chip->clk_div;
dws->n_bytes = DIV_ROUND_UP(transfer->bits_per_word, BITS_PER_BYTE);
cr0 = dws->update_cr0(master, spi, transfer);
--
2.26.2
Powered by blists - more mailing lists