| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 29 May 2020 16:05:02 +0300
From: <alexandru.tachici@...log.com>
To: <linux-hwmon@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>
CC: <robh+dt@...nel.org>, <linux@...ck-us.net>,
Alexandru Tachici <alexandru.tachici@...log.com>
Subject: [PATCH v3 2/6] hwmon: (pmbus/core) Add Block WR
From: Alexandru Tachici <alexandru.tachici@...log.com>
PmBus devices support Block Write-Block Read Process
Call described in SMBus specification v 2.0 with the
exception that Block writes and reads are permitted to
have up 255 data bytes instead of max 32 bytes (SMBus).
This patch adds Block WR process call support for PMBus.
Signed-off-by: Alexandru Tachici <alexandru.tachici@...log.com>
---
drivers/hwmon/pmbus/Kconfig | 2 +-
drivers/hwmon/pmbus/pmbus.h | 4 ++
drivers/hwmon/pmbus/pmbus_core.c | 88 ++++++++++++++++++++++++++++++++
3 files changed, 93 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 6949483aa732..f11712fdcea8 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -5,7 +5,7 @@
menuconfig PMBUS
tristate "PMBus support"
- depends on I2C
+ depends on I2C && CRC8
help
Say yes here if you want to enable PMBus support.
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index 18e06fc6c53f..ae4e15c5dff2 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -392,6 +392,8 @@ enum pmbus_sensor_classes {
#define PMBUS_PHASE_VIRTUAL BIT(30) /* Phases on this page are virtual */
#define PMBUS_PAGE_VIRTUAL BIT(31) /* Page is virtual */
+#define PMBUS_BLOCK_MAX 255
+
enum pmbus_data_format { linear = 0, direct, vid };
enum vrm_version { vr11 = 0, vr12, vr13, imvp9, amd625mv };
@@ -467,6 +469,8 @@ int pmbus_read_word_data(struct i2c_client *client, int page, int phase,
u8 reg);
int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg,
u16 word);
+int pmbus_block_wr(struct i2c_client *client, u8 cmd, u8 w_len, u8 *data_w,
+ u8 *data_r);
int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg,
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 8d321bf7d15b..ef63468da3b5 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -6,6 +6,7 @@
* Copyright (c) 2012 Guenter Roeck
*/
+#include <linux/crc8.h>
#include <linux/debugfs.h>
#include <linux/kernel.h>
#include <linux/math64.h>
@@ -44,6 +45,8 @@
#define PMBUS_NAME_SIZE 24
+DECLARE_CRC8_TABLE(pmbus_crc_table);
+
struct pmbus_sensor {
struct pmbus_sensor *next;
char name[PMBUS_NAME_SIZE]; /* sysfs sensor name */
@@ -184,6 +187,89 @@ int pmbus_set_page(struct i2c_client *client, int page, int phase)
}
EXPORT_SYMBOL_GPL(pmbus_set_page);
+/* Block Write/Read command.
+ * @client: Handle to slave device
+ * @cmd: Byte interpreted by slave
+ * @w_len: Size of write data block; PMBus allows at most 255 bytes
+ * @data_w: byte array which will be written.
+ * @data_r: Byte array into which data will be read; big enough to hold
+ * the data returned by the slave. PMBus allows at most 255 bytes.
+ *
+ * Different from Block Read as it sends data and waits for the slave to
+ * return a value dependent on that data. The protocol is simply a Write Block
+ * followed by a Read Block without the Read-Block command field and the
+ * Write-Block STOP bit.
+ *
+ * Returns number of bytes read or negative errno.
+ */
+int pmbus_block_wr(struct i2c_client *client, u8 cmd, u8 w_len,
+ u8 *data_w, u8 *data_r)
+{
+ u8 write_buf[PMBUS_BLOCK_MAX + 1];
+ struct i2c_msg msgs[2] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .buf = write_buf,
+ .len = w_len + 2,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = PMBUS_BLOCK_MAX,
+ }
+ };
+ u8 addr = 0;
+ u8 crc = 0;
+ int ret;
+
+ msgs[0].buf[0] = cmd;
+ msgs[0].buf[1] = w_len;
+ memcpy(&msgs[0].buf[2], data_w, w_len);
+
+ msgs[0].buf = i2c_get_dma_safe_msg_buf(&msgs[0], 1);
+ if (!msgs[0].buf)
+ return -ENOMEM;
+
+ msgs[1].buf = i2c_get_dma_safe_msg_buf(&msgs[1], 1);
+ if (!msgs[1].buf) {
+ i2c_put_dma_safe_msg_buf(msgs[0].buf, &msgs[0], false);
+ return -ENOMEM;
+ }
+
+ ret = i2c_transfer(client->adapter, msgs, 2);
+ if (ret != 2) {
+ dev_err(&client->dev, "I2C transfer error.");
+ goto cleanup;
+ }
+
+ if (client->flags & I2C_CLIENT_PEC) {
+ addr = i2c_8bit_addr_from_msg(&msgs[0]);
+ crc = crc8(pmbus_crc_table, &addr, 1, crc);
+ crc = crc8(pmbus_crc_table, msgs[0].buf, msgs[0].len, crc);
+
+ addr = i2c_8bit_addr_from_msg(&msgs[1]);
+ crc = crc8(pmbus_crc_table, &addr, 1, crc);
+ crc = crc8(pmbus_crc_table, msgs[1].buf, msgs[1].buf[0] + 1,
+ crc);
+
+ if (crc != msgs[1].buf[msgs[1].buf[0] + 1]) {
+ ret = -EBADMSG;
+ goto cleanup;
+ }
+ }
+
+ memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]);
+ ret = msgs[1].buf[0];
+
+cleanup:
+ i2c_put_dma_safe_msg_buf(msgs[0].buf, &msgs[0], true);
+ i2c_put_dma_safe_msg_buf(msgs[1].buf, &msgs[1], true);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pmbus_block_wr);
+
int pmbus_write_byte(struct i2c_client *client, int page, u8 value)
{
int rv;
@@ -2522,6 +2608,8 @@ int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
if (!data->groups)
return -ENOMEM;
+ crc8_populate_msb(pmbus_crc_table, 0x7);
+
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
data->dev = dev;
--
2.20.1
Powered by blists - more mailing lists