linux-kernel - [PATCH 5.6 107/177] ARM: dts: mmp3-dell-ariel: Fix the SPI devices

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200601174057.533284548@linuxfoundation.org>
Date:   Mon,  1 Jun 2020 19:54:05 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Lubomir Rintel <lkundrak@...sk>,
        Arnd Bergmann <arnd@...db.de>, Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.6 107/177] ARM: dts: mmp3-dell-ariel: Fix the SPI devices

From: Lubomir Rintel <lkundrak@...sk>

[ Upstream commit 233cbffaa0b9ca874731efee67a11f005da1f87c ]

I've managed to get about everything wrong while digging these out of
OEM's board file.

Correct the bus numbers, the exact model of the NOR flash, polarity of
the chip selects and align the SPI frequency with the data sheet.

Tested that it works now, with a slight fix to the PXA SSP driver.

Link: https://lore.kernel.org/r/20200419171157.672999-16-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@...sk>
Cc: <stable@...r.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@...db.de>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 arch/arm/boot/dts/mmp3-dell-ariel.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts
index 15449c72c042..b0ec14c42164 100644
--- a/arch/arm/boot/dts/mmp3-dell-ariel.dts
+++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts
@@ -98,19 +98,19 @@
 	status = "okay";
 };
 
-&ssp3 {
+&ssp1 {
 	status = "okay";
-	cs-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
 
 	firmware-flash@0 {
-		compatible = "st,m25p80", "jedec,spi-nor";
+		compatible = "winbond,w25q32", "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <40000000>;
+		spi-max-frequency = <104000000>;
 		m25p,fast-read;
 	};
 };
 
-&ssp4 {
-	cs-gpios = <&gpio 56 GPIO_ACTIVE_HIGH>;
+&ssp2 {
+	cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
-- 
2.25.1