[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.39 (oe-user@oe-host) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT Wed Jun 3 11:14:56 UTC 2020 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TQ TQMa6Q on MBa6x [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 160 MiB at 0x46000000 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 262144 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s50664 r8192 d23064 u81920 [ 0.000000] pcpu-alloc: s50664 r8192 d23064 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: root=/dev/mmcblk1p2 ro rootwait console=ttymxc1,115200 spi_imx.dyndbg=+p consoleblank=0 cma=160M [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 850004K/1048576K available (12288K kernel code, 942K rwdata, 3656K rodata, 1024K init, 6554K bss, 34732K reserved, 163840K cma-reserved, 0K highmem) [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x20/0x2b8 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 34625 entries in 68 pages [ 0.000000] Running RCU self tests [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 errata 752271 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000038] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001627] Console: colour dummy device 80x30 [ 0.001665] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001689] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001710] ... MAX_LOCK_DEPTH: 48 [ 0.001731] ... MAX_LOCKDEP_KEYS: 8192 [ 0.001753] ... CLASSHASH_SIZE: 4096 [ 0.001774] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001795] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001816] ... CHAINHASH_SIZE: 32768 [ 0.001837] memory used by lock dependency info: 3997 kB [ 0.001857] memory used for stack traces: 2112 kB [ 0.001879] per task-struct memory footprint: 1536 bytes [ 0.001954] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001990] pid_max: default: 32768 minimum: 301 [ 0.002529] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002577] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005100] CPU: Testing write buffer coherency: ok [ 0.005188] CPU0: Spectre v2: using BPIALL workaround [ 0.006476] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.059676] Setting up static identity map for 0x10100000 - 0x10100060 [ 0.079538] rcu: Hierarchical SRCU implementation. [ 0.129545] smp: Bringing up secondary CPUs ... [ 0.209998] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.210013] CPU1: Spectre v2: using BPIALL workaround [ 0.289893] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.289909] CPU2: Spectre v2: using BPIALL workaround [ 0.369890] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.369906] CPU3: Spectre v2: using BPIALL workaround [ 0.370530] smp: Brought up 1 node, 4 CPUs [ 0.370561] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.370588] CPU: All CPU(s) started in SVC mode. [ 0.372564] devtmpfs: initialized [ 0.410896] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.413030] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.413092] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.421441] pinctrl core: initialized pinctrl subsystem [ 0.426181] NET: Registered protocol family 16 [ 0.433762] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.437582] cpuidle: using governor ladder [ 0.437862] CPU identified as i.MX6Q, silicon rev 1.5 [ 0.471153] vdd1p1: supplied by regulator-dummy [ 0.473321] vdd3p0: supplied by regulator-dummy [ 0.475224] vdd2p5: supplied by regulator-dummy [ 0.477087] vddarm: supplied by regulator-dummy [ 0.479142] vddpu: supplied by regulator-dummy [ 0.481062] vddsoc: supplied by regulator-dummy [ 0.520323] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.520388] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.523550] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.648450] mxs-dma 110000.dma-apbh: initialized [ 0.657443] vgaarb: loaded [ 0.658868] SCSI subsystem initialized [ 0.659892] libata version 3.00 loaded. [ 0.660905] usbcore: registered new interface driver usbfs [ 0.661139] usbcore: registered new interface driver hub [ 0.661508] usbcore: registered new device driver usb [ 0.662004] usb_phy_generic usbphynop1: usbphynop1 supply vcc not found, using dummy regulator [ 0.662868] usb_phy_generic usbphynop2: usbphynop2 supply vcc not found, using dummy regulator [ 0.669828] i2c i2c-0: IMX I2C adapter registered [ 0.670672] pps_core: LinuxPPS API ver. 1 registered [ 0.670705] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.670785] PTP clock support registered [ 0.684612] clocksource: Switched to clocksource mxc_timer1 [ 1.749186] thermal_sys: Registered thermal governor 'fair_share' [ 1.749200] thermal_sys: Registered thermal governor 'step_wise' [ 1.749238] thermal_sys: Registered thermal governor 'user_space' [ 1.750134] NET: Registered protocol family 2 [ 1.752014] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear) [ 1.752157] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.752390] TCP bind hash table entries: 8192 (order: 6, 294912 bytes, linear) [ 1.753636] TCP: Hash tables configured (established 8192 bind 8192) [ 1.754236] UDP hash table entries: 512 (order: 3, 40960 bytes, linear) [ 1.754477] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes, linear) [ 1.755420] NET: Registered protocol family 1 [ 1.757776] RPC: Registered named UNIX socket transport module. [ 1.757840] RPC: Registered udp transport module. [ 1.757869] RPC: Registered tcp transport module. [ 1.757895] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.769238] PCI: CLS 0 bytes, default 64 [ 1.770213] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.771085] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.777023] Initialise system trusted keyrings [ 1.777727] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 1.801335] NFS: Registering the id_resolver key type [ 1.801491] Key type id_resolver registered [ 1.801559] Key type id_legacy registered [ 1.801620] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.802401] fuse: init (API version 7.31) [ 1.804515] NILFS version 2 loaded [ 1.847844] Key type asymmetric registered [ 1.847964] Asymmetric key parser 'x509' registered [ 1.848141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.848231] io scheduler mq-deadline registered [ 1.848264] io scheduler kyber registered [ 1.856264] imx6q-pcie 1ffc000.pcie: host bridge /soc/pcie@1ffc000 ranges: [ 1.856481] imx6q-pcie 1ffc000.pcie: IO 0x01f80000..0x01f8ffff -> 0x00000000 [ 1.856673] imx6q-pcie 1ffc000.pcie: MEM 0x01000000..0x01efffff -> 0x01000000 [ 1.867830] pfuze100-regulator 0-0008: Full layer: 2, Metal layer: 1 [ 1.868815] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 1.868848] pfuze100-regulator 0-0008: pfuze100 found. [ 1.902990] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 66, base_baud = 5000000) is a IMX [ 2.690418] printk: console [ttymxc1] enabled [ 2.696881] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 67, base_baud = 5000000) is a IMX [ 2.707411] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 68, base_baud = 5000000) is a IMX [ 2.717922] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 69, base_baud = 5000000) is a IMX [ 2.751447] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.757898] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.764265] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 2.770054] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 [ 2.777234] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 2.783499] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 [ 2.789718] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 2.798852] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 2.811155] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.819258] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.826022] [drm] No driver support for vblank timestamp query. [ 2.833058] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.840981] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.848989] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 2.856919] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 2.866114] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.874294] imx-ipuv3 2800000.ipu: IPUv3H probed [ 2.924219] loop: module loaded [ 2.930036] at24 0-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write [ 2.939241] at24 0-0057: 8192 byte 24c64 EEPROM, writable, 32 bytes/write [ 2.949052] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.957084] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.965190] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.973404] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.981446] ahci-imx 2200000.sata: 2200000.sata supply ahci not found, using dummy regulator [ 2.984638] imx6q-pcie 1ffc000.pcie: Phy link never came up [ 2.990418] ahci-imx 2200000.sata: 2200000.sata supply phy not found, using dummy regulator [ 2.999570] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00 [ 3.004871] ahci-imx 2200000.sata: 2200000.sata supply target not found, using dummy regulator [ 3.010435] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.022842] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 3.024522] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.031601] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 3.037746] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] [ 3.046606] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 3.063094] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400 [ 3.066852] scsi host0: ahci-imx [ 3.069297] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 3.073959] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 72 [ 3.078785] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 3.089243] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 3.093556] pci 0000:00:00.0: Limiting cfg_size to 512 [ 3.094869] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 3.099065] pci 0000:00:00.0: supports D1 [ 3.100886] libphy: Fixed MDIO Bus: probed [ 3.103111] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold [ 3.109042] CAN device driver interface [ 3.119205] PCI: bus0: Fast back to back transfers disabled [ 3.119729] flexcan 2090000.flexcan: 2090000.flexcan supply xceiver not found, using dummy regulator [ 3.129315] PCI: bus1: Fast back to back transfers enabled [ 3.137292] flexcan 2094000.flexcan: 2094000.flexcan supply xceiver not found, using dummy regulator [ 3.139708] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff] [ 3.155673] pci 0000:00:00.0: BAR 6: assigned [mem 0x01100000-0x0110ffff pref] [ 3.157913] pps pps0: new PPS source ptp0 [ 3.162940] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 3.174396] libphy: fec_enet_mii_bus: probed [ 3.175070] pcieport 0000:00:00.0: PME: Signaling with IRQ 306 [ 3.186110] pcieport 0000:00:00.0: AER: enabled with IRQ 306 [ 3.194299] fec 2188000.ethernet eth0: registered PHC device 0 [ 3.201060] usbcore: registered new interface driver cdc_ether [ 3.207280] usbcore: registered new interface driver smsc95xx [ 3.213078] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.219779] ehci-pci: EHCI PCI platform driver [ 3.229820] imx_usb 2184000.usb: No over current polarity defined [ 3.240623] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 3.246062] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 3.274682] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 3.281776] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 3.290256] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.297603] usb usb1: Product: EHCI Host Controller [ 3.302516] usb usb1: Manufacturer: Linux 5.4.39 ehci_hcd [ 3.308009] usb usb1: SerialNumber: ci_hdrc.0 [ 3.315501] hub 1-0:1.0: USB hub found [ 3.319564] hub 1-0:1.0: 1 port detected [ 3.327497] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 3.340408] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 3.345476] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 3.374666] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 3.381179] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 3.389597] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.396928] usb usb2: Product: EHCI Host Controller [ 3.401840] usb usb2: Manufacturer: Linux 5.4.39 ehci_hcd [ 3.407331] usb usb2: SerialNumber: ci_hdrc.1 [ 3.413602] hub 2-0:1.0: USB hub found [ 3.417637] hub 2-0:1.0: 1 port detected [ 3.426579] mousedev: PS/2 mouse device common for all mice [ 3.427092] ata1: SATA link down (SStatus 0 SControl 300) [ 3.437909] ahci-imx 2200000.sata: no device found, disabling link. [ 3.439873] rtc-ds1307 0-0068: SET TIME! [ 3.444206] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 3.453040] rtc-ds1307 0-0068: registered as rtc0 [ 3.462224] i2c /dev entries driver [ 3.467323] IR NEC protocol handler initialized [ 3.471896] IR RC5(x/sz) protocol handler initialized [ 3.477061] IR RC6 protocol handler initialized [ 3.481626] IR JVC protocol handler initialized [ 3.486257] IR Sony protocol handler initialized [ 3.490908] IR SANYO protocol handler initialized [ 3.495701] IR Sharp protocol handler initialized [ 3.500437] IR MCE Keyboard/mouse protocol handler initialized [ 3.506380] IR XMP protocol handler initialized [ 3.517639] lm75 0-0048: hwmon0: sensor 'lm75' [ 3.524506] lm75 0-0049: hwmon1: sensor 'lm75' [ 3.534892] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 3.543361] sdhci: Secure Digital Host Controller Interface driver [ 3.549645] sdhci: Copyright(c) Pierre Ossman [ 3.554034] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.561729] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 3.567078] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 3.609890] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 3.658834] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.664413] mmc1: new high speed SD card at address 1234 [ 3.681829] ledtrig-cpu: registered to indicate activity on CPUs [ 3.682852] mmcblk1: mmc1:1234 SA02G 1.84 GiB [ 3.693026] caam 2100000.caam: Entropy delay = 3200 [ 3.698041] caam 2100000.caam: Instantiated RNG4 SH0 [ 3.713163] mmcblk1: p1 p2 [ 3.758809] caam 2100000.caam: Instantiated RNG4 SH1 [ 3.759812] mmc0: new DDR MMC card at address 0001 [ 3.763816] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4) [ 3.770984] mmcblk0: mmc0:0001 MMC04G 3.52 GiB [ 3.775259] caam 2100000.caam: job rings = 2, qi = 0 [ 3.780796] mmcblk0boot0: mmc0:0001 MMC04G partition 1 16.0 MiB [ 3.790915] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 3.798971] mmcblk0boot1: mmc0:0001 MMC04G partition 2 16.0 MiB [ 3.806146] mmcblk0rpmb: mmc0:0001 MMC04G partition 3 128 KiB, chardev (248:0) [ 3.866261] caam algorithms registered in /proc/crypto [ 3.886189] caam_jr 2101000.jr0: registering rng-caam [ 3.893375] hidraw: raw HID events driver (C) Jiri Kosina [ 3.904241] NET: Registered protocol family 10 [ 3.913193] Segment Routing with IPv6 [ 3.918440] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.927153] NET: Registered protocol family 17 [ 3.931677] can: controller area network core (rev 20170425 abi 9) [ 3.938187] NET: Registered protocol family 29 [ 3.942677] can: raw protocol (rev 20170425) [ 3.947714] can: broadcast manager protocol (rev 20170425 t) [ 3.953440] can: netlink gateway (rev 20190810) max_hops=1 [ 3.959606] Key type dns_resolver registered [ 3.977194] Registering SWP/SWPB emulation handler [ 3.983357] Loading compiled-in X.509 certificates [ 3.990380] Key type ._fscrypt registered [ 3.994473] Key type .fscrypt registered [ 4.006996] usb 2-1: New USB device found, idVendor=0424, idProduct=2517, bcdDevice= 0.02 [ 4.015670] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.029074] hub 2-1:1.0: USB hub found [ 4.033212] hub 2-1:1.0: 7 ports detected [ 4.146893] random: fast init done [ 4.170985] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 4.173012] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 4.176802] imx_thermal tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 4.188966] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 4.190865] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 4.192982] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 4.194861] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 4.199313] rtc-ds1307 0-0068: setting system clock to 2000-01-01T00:00:21 UTC (946684821) [ 4.208146] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.228542] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.236822] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.245866] cfg80211: failed to load regulatory.db [ 4.291084] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.301061] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.311335] devtmpfs: mounted [ 4.330796] Freeing unused kernel memory: 1024K [ 4.336324] Run /sbin/init as init process [ 4.354877] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 4.506587] usb 2-1.1: New USB device found, idVendor=0424, idProduct=9e00, bcdDevice= 3.00 [ 4.515814] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.529638] smsc95xx v1.0.6 [ 4.655285] smsc95xx 2-1.1:1.0 eth1: register 'smsc95xx' at usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet, 8a:d5:54:85:6f:1e [ 4.669861] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 4.671791] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 4.902115] systemd[1]: System time before build time, advancing clock. [ 4.992154] systemd[1]: systemd 243.2+ running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 5.017893] systemd[1]: Detected architecture arm. [ 5.099516] systemd[1]: Set hostname to . [ 5.130656] random: systemd: uninitialized urandom read (16 bytes read) [ 5.138063] systemd[1]: Initializing machine ID from random generator. [ 5.147504] systemd[1]: Installed transient /etc/machine-id file. [ 5.977972] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly. [ 6.309996] systemd[1]: /lib/systemd/system/rpcbind.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/rpcbind.sock \xe2\x86\x92 /run/rpcbind.sock; please update the unit file accordingly. [ 6.356520] random: systemd: uninitialized urandom read (16 bytes read) [ 6.368254] systemd[1]: Created slice system-getty.slice. [ 6.405609] random: systemd: uninitialized urandom read (16 bytes read) [ 6.417127] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 6.455578] random: systemd: uninitialized urandom read (16 bytes read) [ 6.466150] systemd[1]: Created slice User and Session Slice. [ 7.468332] random: crng init done [ 7.475093] random: 6 urandom warning(s) missed due to ratelimiting [ 9.474902] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 9.480768] ext4 filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) [ 9.660308] systemd-journald[278]: Received client request to flush runtime journal. [ 13.253959] input: gpio-beeper as /devices/soc0/gpio-beeper/input/input0 [ 13.275416] input: gpio-buttons as /devices/soc0/gpio-buttons/input/input1 [ 13.286225] mc: Linux media interface: v0.10 [ 13.307788] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 13.310078] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 13.392651] videodev: Linux video capture interface: v2.00 [ 13.659543] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 13.661513] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 13.681591] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 13.683862] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 13.729475] imx_media_common: module is from the staging directory, the quality is unknown, you have been warned. [ 13.731144] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 13.756824] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 13.829961] imx6_media: module is from the staging directory, the quality is unknown, you have been warned. [ 13.887349] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 13.968992] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 13.971136] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 13.972839] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 14.192781] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 14.206348] spi spi0.0: spi_imx_setup: mode 0, 8 bpw, 50000000 hz [ 14.212670] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.213518] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.224910] spi-nor spi0.0: n25q128a13 [ 14.228868] spi-nor spi0.0: spi_nor_info_init_params: 03 [ 14.234331] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.264695] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.264854] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.264954] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.265116] spi-nor spi0.0: Header: 53 [ 14.268909] spi-nor spi0.0: Header: 46 [ 14.276284] spi-nor spi0.0: Header: 44 [ 14.288147] spi-nor spi0.0: Header: 50 [ 14.291946] spi-nor spi0.0: Header: 05 [ 14.296345] spi-nor spi0.0: Header: 01 [ 14.332012] spi-nor spi0.0: Header: 01 [ 14.336321] spi-nor spi0.0: Header: ff [ 14.340112] spi-nor spi0.0: Header: 00 [ 14.343896] spi-nor spi0.0: Header: 05 [ 14.384177] spi-nor spi0.0: Header: 01 [ 14.388354] spi-nor spi0.0: Header: 10 [ 14.392143] spi-nor spi0.0: Header: 30 [ 14.403490] spi-nor spi0.0: Header: 00 [ 14.407429] spi-nor spi0.0: Header: 00 [ 14.411222] spi-nor spi0.0: Header: ff [ 14.424870] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.425075] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.434672] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.434773] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.435531] spi-nor spi0.0: bfpt addr=30 len=40 [ 14.443924] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.444030] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.444117] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.444210] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 14.445225] spi-nor spi0.0: DMA transfer: -22 [ 14.445253] spi-nor spi0.0: Fallback to PIO mode [ 14.446604] spi-nor spi0.0: bfpt: 33 [ 14.464683] spi-nor spi0.0: bfpt: c2 [ 14.473031] spi-nor spi0.0: bfpt: c6 [ 14.476772] spi-nor spi0.0: bfpt: 73 [ 14.480388] spi-nor spi0.0: bfpt: 10 [ 14.483999] spi-nor spi0.0: bfpt: 30 [ 14.510280] spi-nor spi0.0: bfpt: 93 [ 14.517862] spi-nor spi0.0: bfpt: e5 [ 14.521532] spi-nor spi0.0: bfpt: 03 [ 14.534662] spi-nor spi0.0: bfpt: 00 [ 14.538284] spi-nor spi0.0: bfpt: 50 [ 14.541895] spi-nor spi0.0: bfpt: e1 [ 14.556758] spi-nor spi0.0: bfpt: 10 [ 14.560378] spi-nor spi0.0: bfpt: 30 [ 14.563987] spi-nor spi0.0: bfpt: 43 [ 14.584633] spi-nor spi0.0: bfpt: e2 [ 14.588256] spi-nor spi0.0: bfpt: f5 [ 14.591867] spi-nor spi0.0: bfpt: ff [ 14.614667] spi-nor spi0.0: bfpt: ff [ 14.620433] spi-nor spi0.0: bfpt: 1a [ 14.625628] spi-nor spi0.0: bfpt: 00 [ 14.630045] spi-nor spi0.0: bfpt: 00 [ 14.633723] spi-nor spi0.0: bfpt: a0 [ 14.637448] spi-nor spi0.0: bfpt: e3 [ 14.641062] spi-nor spi0.0: bfpt: 00 [ 14.654691] spi-nor spi0.0: bfpt: a8 [ 14.658465] spi-nor spi0.0: bfpt: 9d [ 14.662136] spi-nor spi0.0: bfpt: e8 [ 14.684649] spi-nor spi0.0: bfpt: 08 [ 14.688267] spi-nor spi0.0: bfpt: 00 [ 14.691879] spi-nor spi0.0: bfpt: 93 [ 14.695597] spi-nor spi0.0: bfpt: e5 [ 14.699209] spi-nor spi0.0: bfpt: 00 [ 14.702818] spi-nor spi0.0: bfpt: 00 [ 14.724643] spi-nor spi0.0: bfpt: 00 [ 14.728260] spi-nor spi0.0: bfpt: 00 [ 14.731869] spi-nor spi0.0: bfpt: 00 [ 14.744654] spi-nor spi0.0: bfpt: 00 [ 14.748271] spi-nor spi0.0: bfpt: 00 [ 14.751881] spi-nor spi0.0: bfpt: 00 [ 14.774626] spi-nor spi0.0: bfpt: 00 [ 14.778243] spi-nor spi0.0: bfpt: 00 [ 14.781852] spi-nor spi0.0: bfpt: 00 [ 14.785568] spi-nor spi0.0: bfpt: 00 [ 14.789183] spi-nor spi0.0: bfpt: 00 [ 14.792795] spi-nor spi0.0: bfpt: 00 [ 14.814630] spi-nor spi0.0: bfpt: 00 [ 14.818246] spi-nor spi0.0: bfpt: 00 [ 14.822997] spi-nor spi0.0: bfpt: 00 [ 14.826775] spi-nor spi0.0: bfpt: 00 [ 14.830393] spi-nor spi0.0: bfpt: 00 [ 14.834001] spi-nor spi0.0: bfpt: 00 [ 14.854653] spi-nor spi0.0: bfpt: 00 [ 14.858271] spi-nor spi0.0: bfpt: 00 [ 14.861880] spi-nor spi0.0: bfpt: 00 [ 14.884632] spi-nor spi0.0: bfpt: 00 [ 14.888248] spi-nor spi0.0: bfpt: 00 [ 14.891859] spi-nor spi0.0: bfpt: 00 [ 14.895564] spi-nor spi0.0: bfpt: 00 [ 14.899179] spi-nor spi0.0: bfpt: 00 [ 14.902786] spi-nor spi0.0: bfpt: 00 [ 14.924637] spi-nor spi0.0: bfpt: 00 [ 14.930956] spi-nor spi0.0: bfpt: 00 [ 14.935568] spi-nor spi0.0: bfpt: 00 [ 14.939515] spi-nor spi0.0: param headers: 03 [ 14.954619] spi-nor spi0.0: param headers: 00 [ 14.959019] spi-nor spi0.0: param headers: 01 [ 14.963411] spi-nor spi0.0: param headers: 02 [ 14.984628] spi-nor spi0.0: param headers: 00 [ 14.989027] spi-nor spi0.0: param headers: 01 [ 14.993420] spi-nor spi0.0: param headers: 00 [ 15.014635] spi-nor spi0.0: param headers: ff [ 15.019052] spi-nor spi0.0: has uniform erase [ 15.023446] spi-nor spi0.0: spi_nor_select_erase: 02 [ 15.044665] spi-nor spi0.0: n25q128a13 (16384 Kbytes) [ 15.061846] spi spi0.1: spi_imx_setup: mode 0, 8 bpw, 1000000 hz [ 15.075705] spi_imx 2008000.spi: probed [ 15.094925] spi spi4.0: spi_imx_setup: mode 0, 8 bpw, 1000000 hz [ 15.096762] spi_imx 2018000.spi: probed [ 15.101978] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 15.287829] imx-sdma 20ec000.sdma: loaded firmware 3.5 [ 15.296612] coda 2040000.vpu: Using fallback firmware vpu/vpu_fw_imx6q.bin [ 15.327734] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 15.327805] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 15.327815] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 15.347763] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 15.362182] coda 2040000.vpu: Firmware code revision: 570363 [ 15.410767] coda 2040000.vpu: Initialized CODA960. [ 15.415492] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 15.420845] coda 2040000.vpu: Firmware version: 3.1.1 [ 15.444982] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 15.452228] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 15.473450] coda 2040000.vpu: encoder registered as video3 [ 15.476427] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 15.483869] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 15.483971] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 15.483995] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 15.484017] imx-media: subdev ipu1_csi0 bound [ 15.489622] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video4 [ 15.489653] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 [ 15.489675] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 [ 15.489700] imx-media: subdev ipu1_csi1 bound [ 15.505049] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video5 [ 15.511006] coda 2040000.vpu: decoder registered as video7 [ 15.511124] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video6 [ 15.512195] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video8 [ 15.512285] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0 [ 15.512309] imx-media: ipu2_csi0:1 -> ipu2_vdic:0 [ 15.512329] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0 [ 15.512349] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0 [ 15.512368] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0 [ 15.512388] imx-media: subdev ipu2_csi0 bound [ 15.514171] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video9 [ 15.514198] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0 [ 15.514219] imx-media: ipu2_csi1:1 -> ipu2_vdic:0 [ 15.514243] imx-media: subdev ipu2_csi1 bound [ 15.865584] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:03: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:03, irq=104) [ 16.263698] imx-tlv320aic32x4 sound: tlv320aic32x4-hifi <-> 2028000.ssi mapping ok [ 18.313579] IPv6: ADDRCONF(NETDEV_CHANGE): can1: link becomes ready [ 18.928671] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 18.944737] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.316387] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready