[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.39 (oe-user@oe-host) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT Wed Jun 3 11:14:56 UTC 2020 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TQ TQMa6Q on MBa6x [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 160 MiB at 0x46000000 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 262144 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s50664 r8192 d23064 u81920 [ 0.000000] pcpu-alloc: s50664 r8192 d23064 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: root=/dev/mmcblk1p2 ro rootwait console=ttymxc1,115200 spi_imx.dyndbg=+p spi_imx.use_dma=0 consoleblank=0 cma=160M [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 850004K/1048576K available (12288K kernel code, 942K rwdata, 3656K rodata, 1024K init, 6554K bss, 34732K reserved, 163840K cma-reserved, 0K highmem) [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x20/0x2b8 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 34625 entries in 68 pages [ 0.000000] Running RCU self tests [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 errata 752271 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000040] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001631] Console: colour dummy device 80x30 [ 0.001669] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001692] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001715] ... MAX_LOCK_DEPTH: 48 [ 0.001736] ... MAX_LOCKDEP_KEYS: 8192 [ 0.001757] ... CLASSHASH_SIZE: 4096 [ 0.001778] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001800] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001820] ... CHAINHASH_SIZE: 32768 [ 0.001842] memory used by lock dependency info: 3997 kB [ 0.001863] memory used for stack traces: 2112 kB [ 0.001885] per task-struct memory footprint: 1536 bytes [ 0.001960] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001996] pid_max: default: 32768 minimum: 301 [ 0.002539] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002587] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005096] CPU: Testing write buffer coherency: ok [ 0.005184] CPU0: Spectre v2: using BPIALL workaround [ 0.006475] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.059672] Setting up static identity map for 0x10100000 - 0x10100060 [ 0.079538] rcu: Hierarchical SRCU implementation. [ 0.129545] smp: Bringing up secondary CPUs ... [ 0.209991] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.210006] CPU1: Spectre v2: using BPIALL workaround [ 0.289888] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.289904] CPU2: Spectre v2: using BPIALL workaround [ 0.369890] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.369905] CPU3: Spectre v2: using BPIALL workaround [ 0.370528] smp: Brought up 1 node, 4 CPUs [ 0.370561] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.370588] CPU: All CPU(s) started in SVC mode. [ 0.372568] devtmpfs: initialized [ 0.410888] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.413025] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.413085] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.421403] pinctrl core: initialized pinctrl subsystem [ 0.426128] NET: Registered protocol family 16 [ 0.433661] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.437456] cpuidle: using governor ladder [ 0.437748] CPU identified as i.MX6Q, silicon rev 1.5 [ 0.471008] vdd1p1: supplied by regulator-dummy [ 0.473182] vdd3p0: supplied by regulator-dummy [ 0.475073] vdd2p5: supplied by regulator-dummy [ 0.476908] vddarm: supplied by regulator-dummy [ 0.478967] vddpu: supplied by regulator-dummy [ 0.480889] vddsoc: supplied by regulator-dummy [ 0.520030] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.520096] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.523265] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.648107] mxs-dma 110000.dma-apbh: initialized [ 0.657074] vgaarb: loaded [ 0.658511] SCSI subsystem initialized [ 0.659369] libata version 3.00 loaded. [ 0.660475] usbcore: registered new interface driver usbfs [ 0.660709] usbcore: registered new interface driver hub [ 0.661072] usbcore: registered new device driver usb [ 0.661594] usb_phy_generic usbphynop1: usbphynop1 supply vcc not found, using dummy regulator [ 0.662432] usb_phy_generic usbphynop2: usbphynop2 supply vcc not found, using dummy regulator [ 0.669188] i2c i2c-0: IMX I2C adapter registered [ 0.670341] pps_core: LinuxPPS API ver. 1 registered [ 0.670374] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.670456] PTP clock support registered [ 0.676353] clocksource: Switched to clocksource mxc_timer1 [ 1.737078] thermal_sys: Registered thermal governor 'fair_share' [ 1.737092] thermal_sys: Registered thermal governor 'step_wise' [ 1.737130] thermal_sys: Registered thermal governor 'user_space' [ 1.738017] NET: Registered protocol family 2 [ 1.739904] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear) [ 1.740045] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.740284] TCP bind hash table entries: 8192 (order: 6, 294912 bytes, linear) [ 1.741532] TCP: Hash tables configured (established 8192 bind 8192) [ 1.742172] UDP hash table entries: 512 (order: 3, 40960 bytes, linear) [ 1.742412] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes, linear) [ 1.743199] NET: Registered protocol family 1 [ 1.745671] RPC: Registered named UNIX socket transport module. [ 1.745740] RPC: Registered udp transport module. [ 1.745769] RPC: Registered tcp transport module. [ 1.745796] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.757323] PCI: CLS 0 bytes, default 64 [ 1.758307] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.759172] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.765027] Initialise system trusted keyrings [ 1.765726] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 1.789539] NFS: Registering the id_resolver key type [ 1.789704] Key type id_resolver registered [ 1.789773] Key type id_legacy registered [ 1.789835] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.790627] fuse: init (API version 7.31) [ 1.792764] NILFS version 2 loaded [ 1.835404] Key type asymmetric registered [ 1.835520] Asymmetric key parser 'x509' registered [ 1.835696] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.835784] io scheduler mq-deadline registered [ 1.835819] io scheduler kyber registered [ 1.843810] imx6q-pcie 1ffc000.pcie: host bridge /soc/pcie@1ffc000 ranges: [ 1.844039] imx6q-pcie 1ffc000.pcie: IO 0x01f80000..0x01f8ffff -> 0x00000000 [ 1.844226] imx6q-pcie 1ffc000.pcie: MEM 0x01000000..0x01efffff -> 0x01000000 [ 1.858225] pfuze100-regulator 0-0008: Full layer: 2, Metal layer: 1 [ 1.859205] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 1.859238] pfuze100-regulator 0-0008: pfuze100 found. [ 1.890339] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 66, base_baud = 5000000) is a IMX [ 2.680255] printk: console [ttymxc1] enabled [ 2.686801] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 67, base_baud = 5000000) is a IMX [ 2.697330] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 68, base_baud = 5000000) is a IMX [ 2.707805] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 69, base_baud = 5000000) is a IMX [ 2.741460] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.748059] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.754360] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 2.760245] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 [ 2.767417] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 2.773680] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 [ 2.779902] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 2.789034] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 2.801365] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.809445] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.816130] [drm] No driver support for vblank timestamp query. [ 2.823228] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.831124] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.839160] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 2.847137] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 2.856233] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.864612] imx-ipuv3 2800000.ipu: IPUv3H probed [ 2.914658] loop: module loaded [ 2.920485] at24 0-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write [ 2.929692] at24 0-0057: 8192 byte 24c64 EEPROM, writable, 32 bytes/write [ 2.939479] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.947642] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.955689] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.964010] imx6q-pcie 1ffc000.pcie: Phy link never came up [ 2.966389] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.973648] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00 [ 2.977739] ahci-imx 2200000.sata: 2200000.sata supply ahci not found, using dummy regulator [ 2.983685] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.992706] ahci-imx 2200000.sata: 2200000.sata supply phy not found, using dummy regulator [ 2.998303] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.006598] ahci-imx 2200000.sata: 2200000.sata supply target not found, using dummy regulator [ 3.012421] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] [ 3.024478] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 3.028211] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400 [ 3.034996] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 3.041143] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 3.050001] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 3.056237] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 3.072398] pci 0000:00:00.0: Limiting cfg_size to 512 [ 3.076365] scsi host0: ahci-imx [ 3.077943] pci 0000:00:00.0: supports D1 [ 3.082449] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 72 [ 3.084843] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold [ 3.095327] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 3.101754] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 3.104858] PCI: bus0: Fast back to back transfers disabled [ 3.106597] libphy: Fixed MDIO Bus: probed [ 3.115001] PCI: bus1: Fast back to back transfers enabled [ 3.116403] CAN device driver interface [ 3.120655] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff] [ 3.125099] flexcan 2090000.flexcan: 2090000.flexcan supply xceiver not found, using dummy regulator [ 3.131427] pci 0000:00:00.0: BAR 6: assigned [mem 0x01100000-0x0110ffff pref] [ 3.143698] flexcan 2094000.flexcan: 2094000.flexcan supply xceiver not found, using dummy regulator [ 3.147756] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 3.164254] pcieport 0000:00:00.0: PME: Signaling with IRQ 305 [ 3.170613] pps pps0: new PPS source ptp0 [ 3.171747] pcieport 0000:00:00.0: AER: enabled with IRQ 305 [ 3.183196] libphy: fec_enet_mii_bus: probed [ 3.192249] fec 2188000.ethernet eth0: registered PHC device 0 [ 3.199001] usbcore: registered new interface driver cdc_ether [ 3.205054] usbcore: registered new interface driver smsc95xx [ 3.210919] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.217682] ehci-pci: EHCI PCI platform driver [ 3.227720] imx_usb 2184000.usb: No over current polarity defined [ 3.238373] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 3.243746] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 3.276411] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 3.283528] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 3.291994] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.299318] usb usb1: Product: EHCI Host Controller [ 3.304231] usb usb1: Manufacturer: Linux 5.4.39 ehci_hcd [ 3.309716] usb usb1: SerialNumber: ci_hdrc.0 [ 3.317202] hub 1-0:1.0: USB hub found [ 3.321265] hub 1-0:1.0: 1 port detected [ 3.329209] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 3.342112] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 3.347176] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 3.376393] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 3.382894] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 3.391272] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.398583] usb usb2: Product: EHCI Host Controller [ 3.403493] usb usb2: Manufacturer: Linux 5.4.39 ehci_hcd [ 3.408978] usb usb2: SerialNumber: ci_hdrc.1 [ 3.415229] hub 2-0:1.0: USB hub found [ 3.419248] hub 2-0:1.0: 1 port detected [ 3.427951] mousedev: PS/2 mouse device common for all mice [ 3.428839] ata1: SATA link down (SStatus 0 SControl 300) [ 3.439416] ahci-imx 2200000.sata: no device found, disabling link. [ 3.442758] rtc-ds1307 0-0068: registered as rtc0 [ 3.445717] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 3.454943] i2c /dev entries driver [ 3.462641] IR NEC protocol handler initialized [ 3.467289] IR RC5(x/sz) protocol handler initialized [ 3.472376] IR RC6 protocol handler initialized [ 3.476994] IR JVC protocol handler initialized [ 3.481558] IR Sony protocol handler initialized [ 3.486205] IR SANYO protocol handler initialized [ 3.490990] IR Sharp protocol handler initialized [ 3.495727] IR MCE Keyboard/mouse protocol handler initialized [ 3.501637] IR XMP protocol handler initialized [ 3.512833] lm75 0-0048: hwmon0: sensor 'lm75' [ 3.519831] lm75 0-0049: hwmon1: sensor 'lm75' [ 3.530185] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 3.538884] sdhci: Secure Digital Host Controller Interface driver [ 3.545099] sdhci: Copyright(c) Pierre Ossman [ 3.549544] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.557199] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 3.562477] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 3.605232] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 3.653852] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.665614] mmc1: new high speed SD card at address 1234 [ 3.671379] ledtrig-cpu: registered to indicate activity on CPUs [ 3.676733] mmcblk1: mmc1:1234 SA02G 1.84 GiB [ 3.682576] caam 2100000.caam: Entropy delay = 3200 [ 3.712975] mmcblk1: p1 p2 [ 3.746619] mmc0: new DDR MMC card at address 0001 [ 3.748340] caam 2100000.caam: Instantiated RNG4 SH0 [ 3.753640] mmcblk0: mmc0:0001 MMC04G 3.52 GiB [ 3.762081] mmcblk0boot0: mmc0:0001 MMC04G partition 1 16.0 MiB [ 3.769401] mmcblk0boot1: mmc0:0001 MMC04G partition 2 16.0 MiB [ 3.776217] mmcblk0rpmb: mmc0:0001 MMC04G partition 3 128 KiB, chardev (248:0) [ 3.786601] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 3.809107] caam 2100000.caam: Instantiated RNG4 SH1 [ 3.814128] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4) [ 3.820658] caam 2100000.caam: job rings = 2, qi = 0 [ 3.880079] caam algorithms registered in /proc/crypto [ 3.900455] caam_jr 2101000.jr0: registering rng-caam [ 3.907616] hidraw: raw HID events driver (C) Jiri Kosina [ 3.918604] NET: Registered protocol family 10 [ 3.927540] Segment Routing with IPv6 [ 3.931378] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.940432] NET: Registered protocol family 17 [ 3.944955] can: controller area network core (rev 20170425 abi 9) [ 3.951491] NET: Registered protocol family 29 [ 3.955980] can: raw protocol (rev 20170425) [ 3.961494] can: broadcast manager protocol (rev 20170425 t) [ 3.967278] can: netlink gateway (rev 20190810) max_hops=1 [ 3.973382] Key type dns_resolver registered [ 3.991361] Registering SWP/SWPB emulation handler [ 3.997852] Loading compiled-in X.509 certificates [ 4.004844] Key type ._fscrypt registered [ 4.008700] usb 2-1: New USB device found, idVendor=0424, idProduct=2517, bcdDevice= 0.02 [ 4.009670] Key type .fscrypt registered [ 4.017420] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.034111] hub 2-1:1.0: USB hub found [ 4.038408] hub 2-1:1.0: 7 ports detected [ 4.178587] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 4.180625] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 4.184304] imx_thermal tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 4.198751] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 4.202494] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 4.206768] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 4.209072] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 4.212563] random: fast init done [ 4.217265] rtc-ds1307 0-0068: setting system clock to 2000-01-01T00:02:49 UTC (946684969) [ 4.226041] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.240578] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.248850] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.257793] cfg80211: failed to load regulatory.db [ 4.284573] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 4.292215] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 4.396600] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc [ 4.577913] usb 2-1.1: New USB device found, idVendor=0424, idProduct=9e00, bcdDevice= 3.00 [ 4.586513] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.599418] smsc95xx v1.0.6 [ 4.749453] smsc95xx 2-1.1:1.0 eth1: register 'smsc95xx' at usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet, 82:2d:52:34:cf:2a [ 4.765314] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 4.769182] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 4.780142] EXT4-fs (mmcblk1p2): recovery complete [ 4.797452] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.806747] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.818722] devtmpfs: mounted [ 4.851029] Freeing unused kernel memory: 1024K [ 4.856666] Run /sbin/init as init process [ 5.418635] systemd[1]: System time before build time, advancing clock. [ 5.508743] systemd[1]: systemd 243.2+ running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 5.535563] systemd[1]: Detected architecture arm. [ 5.611280] systemd[1]: Set hostname to . [ 6.401685] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly. [ 6.782349] systemd[1]: /lib/systemd/system/rpcbind.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/rpcbind.sock \xe2\x86\x92 /run/rpcbind.sock; please update the unit file accordingly. [ 6.830107] random: systemd: uninitialized urandom read (16 bytes read) [ 6.841514] systemd[1]: Created slice system-getty.slice. [ 6.887096] random: systemd: uninitialized urandom read (16 bytes read) [ 6.897900] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 6.947264] random: systemd: uninitialized urandom read (16 bytes read) [ 6.957658] systemd[1]: Created slice User and Session Slice. [ 6.999521] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 7.039178] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.950566] random: crng init done [ 7.954034] random: 7 urandom warning(s) missed due to ratelimiting [ 8.497381] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 8.503256] ext4 filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) [ 8.964912] systemd[295]: systemd-udevd.service: ProtectHostname=yes is configured, but the kernel does not support UTS namespaces, ignoring namespace setup. [ 9.174457] systemd-journald[277]: Received client request to flush runtime journal. [ 11.049679] input: gpio-buttons as /devices/soc0/gpio-buttons/input/input1 [ 11.049787] input: gpio-beeper as /devices/soc0/gpio-beeper/input/input0 [ 11.068230] mc: Linux media interface: v0.10 [ 11.083566] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 11.085501] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 11.095673] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 11.097824] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 11.197809] videodev: Linux video capture interface: v2.00 [ 11.351020] imx_media_common: module is from the staging directory, the quality is unknown, you have been warned. [ 11.351685] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 11.374712] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 11.423080] imx6_media: module is from the staging directory, the quality is unknown, you have been warned. [ 11.481814] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 11.622670] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 11.624876] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 11.633873] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 11.674681] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 11.697069] spi_imx 2008000.spi: can't get the TX DMA channel, error -517! [ 11.699226] spi_imx 2018000.spi: can't get the TX DMA channel, error -517! [ 11.700980] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 11.761861] spi spi0.0: spi_imx_setup: mode 0, 8 bpw, 50000000 hz [ 11.764793] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 11.787745] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 11.788056] spi-nor spi0.0: n25q128a13 [ 11.794833] coda 2040000.vpu: Using fallback firmware vpu/vpu_fw_imx6q.bin [ 11.807919] spi-nor spi0.0: spi_nor_info_init_params: 03 [ 11.870437] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 11.870594] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 11.870678] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 11.870765] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 11.872719] spi-nor spi0.0: Header: 53 [ 11.876721] spi-nor spi0.0: Header: 46 [ 11.936444] spi-nor spi0.0: Header: 44 [ 11.940282] spi-nor spi0.0: Header: 50 [ 11.944121] spi-nor spi0.0: Header: 05 [ 11.976413] spi-nor spi0.0: Header: 01 [ 11.980221] spi-nor spi0.0: Header: 01 [ 11.987891] spi-nor spi0.0: Header: ff [ 11.991691] spi-nor spi0.0: Header: 00 [ 11.995477] spi-nor spi0.0: Header: 05 [ 12.024555] spi-nor spi0.0: Header: 01 [ 12.045931] spi-nor spi0.0: Header: 10 [ 12.075446] spi-nor spi0.0: Header: 30 [ 12.106506] spi-nor spi0.0: Header: 00 [ 12.110350] spi-nor spi0.0: Header: 00 [ 12.114172] spi-nor spi0.0: Header: ff [ 12.147075] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 12.147153] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 12.147217] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 12.147277] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 12.148841] spi-nor spi0.0: bfpt addr=30 len=40 [ 12.166023] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 12.166103] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 12.167341] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 12.167468] spi_imx 2008000.spi: mx51_ecspi_clkdiv: fin: 60000000, fspi: 50000000, post: 0, pre: 1 [ 12.169177] spi-nor spi0.0: bfpt: e5 [ 12.191849] spi-nor spi0.0: bfpt: 20 [ 12.195474] spi-nor spi0.0: bfpt: f1 [ 12.209855] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:03: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:03, irq=104) [ 12.225459] spi-nor spi0.0: bfpt: ff [ 12.229684] spi-nor spi0.0: bfpt: ff [ 12.260442] spi-nor spi0.0: bfpt: ff [ 12.264188] spi-nor spi0.0: bfpt: ff [ 12.279151] spi-nor spi0.0: bfpt: 07 [ 12.294820] spi-nor spi0.0: bfpt: 29 [ 12.309453] spi-nor spi0.0: bfpt: eb [ 12.313081] spi-nor spi0.0: bfpt: 27 [ 12.316876] spi-nor spi0.0: bfpt: 6b [ 12.321341] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 12.335698] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 12.347651] spi-nor spi0.0: bfpt: 27 [ 12.355251] spi-nor spi0.0: bfpt: 3b [ 12.395230] spi-nor spi0.0: bfpt: 27 [ 12.408021] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 12.415751] spi-nor spi0.0: bfpt: bb [ 12.415814] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 12.426966] imx6_media_csi: module is from the staging directory, the quality is unknown, you have been warned. [ 12.432747] spi-nor spi0.0: bfpt: ff [ 12.456245] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 12.456611] spi-nor spi0.0: bfpt: ff [ 12.473108] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 12.499078] spi-nor spi0.0: bfpt: ff [ 12.502756] spi-nor spi0.0: bfpt: ff [ 12.517429] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 12.528275] spi-nor spi0.0: bfpt: ff [ 12.531955] spi-nor spi0.0: bfpt: ff [ 12.533364] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 12.551890] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 12.559605] spi-nor spi0.0: bfpt: 27 [ 12.563251] spi-nor spi0.0: bfpt: bb [ 12.567067] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 12.582238] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 12.594779] spi-nor spi0.0: bfpt: ff [ 12.598558] spi-nor spi0.0: bfpt: ff [ 12.602209] spi-nor spi0.0: bfpt: 29 [ 12.607405] imx-media: subdev ipu1_csi0 bound [ 12.633656] spi-nor spi0.0: bfpt: eb [ 12.637402] spi-nor spi0.0: bfpt: 0c [ 12.656467] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 12.659961] spi-nor spi0.0: bfpt: 20 [ 12.666992] spi-nor spi0.0: bfpt: 10 [ 12.670647] spi-nor spi0.0: bfpt: d8 [ 12.672261] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 [ 12.694552] spi-nor spi0.0: bfpt: 00 [ 12.708481] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 [ 12.711604] spi-nor spi0.0: bfpt: 00 [ 12.727267] imx-media: subdev ipu1_csi1 bound [ 12.736656] spi-nor spi0.0: bfpt: 00 [ 12.740611] spi-nor spi0.0: bfpt: 00 [ 12.744387] spi-nor spi0.0: bfpt: 35 [ 12.747752] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video4 [ 12.778642] spi-nor spi0.0: bfpt: 8a [ 12.782320] spi-nor spi0.0: bfpt: 01 [ 12.785998] spi-nor spi0.0: bfpt: 00 [ 12.786257] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video5 [ 12.812138] spi-nor spi0.0: bfpt: 82 [ 12.815770] spi-nor spi0.0: bfpt: a3 [ 12.833307] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video6 [ 12.853184] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0 [ 12.867251] spi-nor spi0.0: bfpt: 03 [ 12.867601] imx-media: ipu2_csi0:1 -> ipu2_vdic:0 [ 12.874324] spi-nor spi0.0: bfpt: cb [ 12.889407] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0 [ 12.896387] spi-nor spi0.0: bfpt: ac [ 12.900019] spi-nor spi0.0: bfpt: c1 [ 12.903640] spi-nor spi0.0: bfpt: 04 [ 12.906510] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0 [ 12.920315] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0 [ 12.925603] imx-media: subdev ipu2_csi0 bound [ 12.943675] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 12.950064] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0 [ 12.955019] imx-media: ipu2_csi1:1 -> ipu2_vdic:0 [ 12.969453] spi-nor spi0.0: bfpt: 2e [ 12.973079] spi-nor spi0.0: bfpt: 7a [ 12.976389] imx-media: subdev ipu2_csi1 bound [ 12.976797] spi-nor spi0.0: bfpt: 75 [ 13.007042] spi-nor spi0.0: bfpt: 7a [ 13.010670] spi-nor spi0.0: bfpt: 75 [ 13.014283] spi-nor spi0.0: bfpt: fb [ 13.035649] spi-nor spi0.0: bfpt: 00 [ 13.040012] spi-nor spi0.0: bfpt: 00 [ 13.057608] spi-nor spi0.0: bfpt: 80 [ 13.061970] spi-nor spi0.0: bfpt: 08 [ 13.065637] spi-nor spi0.0: bfpt: 0f [ 13.069493] spi-nor spi0.0: bfpt: 82 [ 13.073210] spi-nor spi0.0: bfpt: ff [ 13.093995] spi-nor spi0.0: bfpt: 81 [ 13.097994] spi-nor spi0.0: bfpt: 3d [ 13.101611] spi-nor spi0.0: bfpt: 00 [ 13.105220] spi-nor spi0.0: bfpt: 00 [ 13.136446] spi-nor spi0.0: spi_nor_parse_bfpt: 03 [ 13.141319] spi-nor spi0.0: spi_nor_parse_bfpt: 0c [ 13.146149] spi-nor spi0.0: param headers: 03 [ 13.186412] spi-nor spi0.0: param headers: 00 [ 13.190824] spi-nor spi0.0: param headers: 01 [ 13.195215] spi-nor spi0.0: param headers: 02 [ 13.239140] spi-nor spi0.0: param headers: 00 [ 13.243549] spi-nor spi0.0: param headers: 01 [ 13.266414] spi-nor spi0.0: param headers: 00 [ 13.286417] spi-nor spi0.0: param headers: ff [ 13.290846] spi-nor spi0.0: has uniform erase [ 13.295240] spi-nor spi0.0: spi_nor_select_erase: 08 [ 13.340596] spi-nor spi0.0: n25q128a13 (16384 Kbytes) [ 13.378430] imx-sdma 20ec000.sdma: loaded firmware 3.5 [ 13.403404] spi spi0.1: spi_imx_setup: mode 0, 8 bpw, 1000000 hz [ 13.405629] coda 2040000.vpu: Firmware code revision: 570363 [ 13.416498] coda 2040000.vpu: Initialized CODA960. [ 13.421334] coda 2040000.vpu: Firmware version: 3.1.1 [ 13.454666] spi_imx 2008000.spi: probed [ 13.469845] spi spi4.0: spi_imx_setup: mode 0, 8 bpw, 1000000 hz [ 13.485789] imx-tlv320aic32x4 sound: tlv320aic32x4-hifi <-> 2028000.ssi mapping ok [ 13.486786] spi_imx 2018000.spi: probed [ 13.498976] coda 2040000.vpu: encoder registered as video8 [ 13.516607] coda 2040000.vpu: decoder registered as video9 [ 13.937912] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready [ 13.944925] IPv6: ADDRCONF(NETDEV_CHANGE): can1: link becomes ready [ 15.337279] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 15.356432] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready