linux-kernel - [PATCH v2 0/3] DCMI set minimum cpufreq requirement

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200603124559.22652-1-benjamin.gaignard@st.com>
Date:   Wed, 3 Jun 2020 14:45:56 +0200
From:   Benjamin Gaignard <benjamin.gaignard@...com>
To:     <hugues.fruchet@...com>, <mchehab@...nel.org>,
        <mcoquelin.stm32@...il.com>, <alexandre.torgue@...com>
CC:     <linux-media@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <vincent.guittot@...aro.org>,
        <valentin.schneider@....com>, <rjw@...ysocki.net>,
        Benjamin Gaignard <benjamin.gaignard@...com>
Subject: [PATCH v2 0/3] DCMI set minimum cpufreq requirement

This series allow to STM32 camera interface (DCMI) to require a minimum
frequency to the CPUs before start streaming frames from the sensor.
The minimum frequency requirement is provided in the devide-tree node.

Setting a minimum frequency for the CPUs is needed to ensure a quick handling
of the interrupts between two sensor frames and avoid dropping half of them.

Benjamin Gaignard (3):
  dt-bindings: media: stm32-dcmi: Add DCMI min frequency property
  media: stm32-dcmi: Set minimum cpufreq requirement
  ARM: dts: stm32: Set DCMI frequency requirement for stm32mp15x

 .../devicetree/bindings/media/st,stm32-dcmi.yaml   |  8 ++
 arch/arm/boot/dts/stm32mp151.dtsi                  |  1 +
 drivers/media/platform/stm32/stm32-dcmi.c          | 90 ++++++++++++++++++++--
 3 files changed, 91 insertions(+), 8 deletions(-)

-- 
2.15.0