[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200604123932.20512-4-benjamin.gaignard@st.com>
Date: Thu, 4 Jun 2020 14:39:32 +0200
From: Benjamin Gaignard <benjamin.gaignard@...com>
To: <hugues.fruchet@...com>, <mchehab@...nel.org>,
<mcoquelin.stm32@...il.com>, <alexandre.torgue@...com>
CC: <linux-media@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <vincent.guittot@...aro.org>,
<valentin.schneider@....com>, <rjw@...ysocki.net>,
Benjamin Gaignard <benjamin.gaignard@...com>
Subject: [PATCH v3 3/3] ARM: dts: stm32: Set DCMI frequency requirement for stm32mp15x
Make sure that CPUs will at least run at 650Mhz when streaming
sensor frames.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@...com>
---
arch/arm/boot/dts/stm32mp151.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 3ea05ba48215..f6d7bf4f8231 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1091,6 +1091,7 @@
clock-names = "mclk";
dmas = <&dmamux1 75 0x400 0x0d>;
dma-names = "tx";
+ st,stm32-dcmi-min-frequency = <650000>;
status = "disabled";
};
--
2.15.0
Powered by blists - more mailing lists