[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200604015317.31389-5-thara.gopinath@linaro.org>
Date: Wed, 3 Jun 2020 21:53:15 -0400
From: Thara Gopinath <thara.gopinath@...aro.org>
To: rui.zhang@...el.com, ulf.hansson@...aro.org,
daniel.lezcano@...aro.org, bjorn.andersson@...aro.org,
agross@...nel.org, robh@...nel.org
Cc: amit.kucheria@...durent.com, mark.rutland@....com,
rjw@...ysocki.net, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v6 4/6] soc: qcom: Extend RPMh power controller driver to register warming devices.
RPMh power control hosts power domains that can be used as
thermal warming devices. Register these power domains
with the generic power domain warming device thermal framework.
Signed-off-by: Thara Gopinath <thara.gopinath@...aro.org>
---
v3->v4:
- Introduce a boolean value is_warming_dev in rpmhpd structure to
indicate if a generic power domain can be used as a warming
device or not.With this change, device tree no longer has to
specify which power domain inside the rpmh power domain provider
is a warming device.
- Move registering of warming devices into a late initcall to
ensure that warming devices are registered after thermal
framework is initialized.
v5->v6:
- Moved back registering of warming devices into probe since
Bjorn pointed out that now the driver can be initialized as
as a module, late_initcall will not work. Thermal framework
takes care of binding a cooling device to a thermal zone even
if the cooling device is registered before the thermal framework
is initialized.
drivers/soc/qcom/rpmhpd.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
index a9c597143525..29e1eb4d11af 100644
--- a/drivers/soc/qcom/rpmhpd.c
+++ b/drivers/soc/qcom/rpmhpd.c
@@ -12,6 +12,7 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_opp.h>
+#include <linux/pd_warming.h>
#include <soc/qcom/cmd-db.h>
#include <soc/qcom/rpmh.h>
#include <dt-bindings/power/qcom-rpmpd.h>
@@ -49,6 +50,7 @@ struct rpmhpd {
bool enabled;
const char *res_name;
u32 addr;
+ bool is_warming_dev;
};
struct rpmhpd_desc {
@@ -90,6 +92,7 @@ static struct rpmhpd sdm845_mx = {
.pd = { .name = "mx", },
.peer = &sdm845_mx_ao,
.res_name = "mx.lvl",
+ .is_warming_dev = true,
};
static struct rpmhpd sdm845_mx_ao = {
@@ -472,7 +475,19 @@ static int rpmhpd_probe(struct platform_device *pdev)
&rpmhpds[i]->pd);
}
- return of_genpd_add_provider_onecell(pdev->dev.of_node, data);
+ ret = of_genpd_add_provider_onecell(pdev->dev.of_node, data);
+
+ if (ret)
+ return ret;
+
+ if (!of_find_property(dev->of_node, "#cooling-cells", NULL))
+ return 0;
+
+ for (i = 0; i < num_pds; i++)
+ if (rpmhpds[i]->is_warming_dev)
+ of_pd_warming_register(rpmhpds[i]->dev, i);
+
+ return 0;
}
static struct platform_driver rpmhpd_driver = {
--
2.20.1
Powered by blists - more mailing lists