lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CANXhq0qjWKCqbY4BmCa1wZKYY_Dax8fGj1s4Q_ZipaFPo9dz8g@mail.gmail.com>
Date:   Thu, 4 Jun 2020 10:52:19 +0800
From:   Zong Li <zong.li@...ive.com>
To:     Alexandre Ghiti <alex@...ti.fr>
Cc:     Michael Ellerman <mpe@...erman.id.au>,
        Benjamin Herrenschmidt <benh@...nel.crashing.org>,
        Paul Mackerras <paulus@...ba.org>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Palmer Dabbelt <palmer@...belt.com>,
        Albert Ou <aou@...s.berkeley.edu>,
        Anup Patel <Anup.Patel@....com>,
        Atish Patra <Atish.Patra@....com>,
        "linux-kernel@...r.kernel.org List" <linux-kernel@...r.kernel.org>,
        linuxppc-dev@...ts.ozlabs.org,
        linux-riscv <linux-riscv@...ts.infradead.org>
Subject: Re: [PATCH v4 1/4] riscv: Move kernel mapping to vmalloc zone

On Wed, Jun 3, 2020 at 4:01 PM Alexandre Ghiti <alex@...ti.fr> wrote:
>
> This is a preparatory patch for relocatable kernel.
>
> The kernel used to be linked at PAGE_OFFSET address and used to be loaded
> physically at the beginning of the main memory. Therefore, we could use
> the linear mapping for the kernel mapping.
>
> But the relocated kernel base address will be different from PAGE_OFFSET
> and since in the linear mapping, two different virtual addresses cannot
> point to the same physical address, the kernel mapping needs to lie outside
> the linear mapping.
>
> In addition, because modules and BPF must be close to the kernel (inside
> +-2GB window), the kernel is placed at the end of the vmalloc zone minus
> 2GB, which leaves room for modules and BPF. The kernel could not be
> placed at the beginning of the vmalloc zone since other vmalloc
> allocations from the kernel could get all the +-2GB window around the
> kernel which would prevent new modules and BPF programs to be loaded.
>
> Signed-off-by: Alexandre Ghiti <alex@...ti.fr>
> ---
>  arch/riscv/boot/loader.lds.S     |  3 +-
>  arch/riscv/include/asm/page.h    | 10 +++++-
>  arch/riscv/include/asm/pgtable.h | 38 ++++++++++++++-------
>  arch/riscv/kernel/head.S         |  3 +-
>  arch/riscv/kernel/module.c       |  4 +--
>  arch/riscv/kernel/vmlinux.lds.S  |  3 +-
>  arch/riscv/mm/init.c             | 58 +++++++++++++++++++++++++-------
>  arch/riscv/mm/physaddr.c         |  2 +-
>  8 files changed, 88 insertions(+), 33 deletions(-)
>
> diff --git a/arch/riscv/boot/loader.lds.S b/arch/riscv/boot/loader.lds.S
> index 47a5003c2e28..62d94696a19c 100644
> --- a/arch/riscv/boot/loader.lds.S
> +++ b/arch/riscv/boot/loader.lds.S
> @@ -1,13 +1,14 @@
>  /* SPDX-License-Identifier: GPL-2.0 */
>
>  #include <asm/page.h>
> +#include <asm/pgtable.h>
>
>  OUTPUT_ARCH(riscv)
>  ENTRY(_start)
>
>  SECTIONS
>  {
> -       . = PAGE_OFFSET;
> +       . = KERNEL_LINK_ADDR;
>
>         .payload : {
>                 *(.payload)
> diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h
> index 2d50f76efe48..48bb09b6a9b7 100644
> --- a/arch/riscv/include/asm/page.h
> +++ b/arch/riscv/include/asm/page.h
> @@ -90,18 +90,26 @@ typedef struct page *pgtable_t;
>
>  #ifdef CONFIG_MMU
>  extern unsigned long va_pa_offset;
> +extern unsigned long va_kernel_pa_offset;
>  extern unsigned long pfn_base;
>  #define ARCH_PFN_OFFSET                (pfn_base)
>  #else
>  #define va_pa_offset           0
> +#define va_kernel_pa_offset    0
>  #define ARCH_PFN_OFFSET                (PAGE_OFFSET >> PAGE_SHIFT)
>  #endif /* CONFIG_MMU */
>
>  extern unsigned long max_low_pfn;
>  extern unsigned long min_low_pfn;
> +extern unsigned long kernel_virt_addr;
>
>  #define __pa_to_va_nodebug(x)  ((void *)((unsigned long) (x) + va_pa_offset))
> -#define __va_to_pa_nodebug(x)  ((unsigned long)(x) - va_pa_offset)
> +#define linear_mapping_va_to_pa(x)     ((unsigned long)(x) - va_pa_offset)
> +#define kernel_mapping_va_to_pa(x)     \
> +       ((unsigned long)(x) - va_kernel_pa_offset)
> +#define __va_to_pa_nodebug(x)          \
> +       (((x) >= PAGE_OFFSET) ?         \
> +               linear_mapping_va_to_pa(x) : kernel_mapping_va_to_pa(x))
>
>  #ifdef CONFIG_DEBUG_VIRTUAL
>  extern phys_addr_t __virt_to_phys(unsigned long x);
> diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> index 35b60035b6b0..94ef3b49dfb6 100644
> --- a/arch/riscv/include/asm/pgtable.h
> +++ b/arch/riscv/include/asm/pgtable.h
> @@ -11,23 +11,29 @@
>
>  #include <asm/pgtable-bits.h>
>
> -#ifndef __ASSEMBLY__
> -
> -/* Page Upper Directory not used in RISC-V */
> -#include <asm-generic/pgtable-nopud.h>
> -#include <asm/page.h>
> -#include <asm/tlbflush.h>
> -#include <linux/mm_types.h>
> -
> -#ifdef CONFIG_MMU
> +#ifndef CONFIG_MMU
> +#define KERNEL_VIRT_ADDR       PAGE_OFFSET
> +#define KERNEL_LINK_ADDR       PAGE_OFFSET
> +#else
> +/*
> + * Leave 2GB for modules and BPF that must lie within a 2GB range around
> + * the kernel.
> + */
> +#define KERNEL_VIRT_ADDR       (VMALLOC_END - SZ_2G + 1)
> +#define KERNEL_LINK_ADDR       KERNEL_VIRT_ADDR
>
>  #define VMALLOC_SIZE     (KERN_VIRT_SIZE >> 1)
>  #define VMALLOC_END      (PAGE_OFFSET - 1)
>  #define VMALLOC_START    (PAGE_OFFSET - VMALLOC_SIZE)
>
>  #define BPF_JIT_REGION_SIZE    (SZ_128M)
> -#define BPF_JIT_REGION_START   (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> -#define BPF_JIT_REGION_END     (VMALLOC_END)
> +#define BPF_JIT_REGION_START   PFN_ALIGN((unsigned long)&_end)
> +#define BPF_JIT_REGION_END     (BPF_JIT_REGION_START + BPF_JIT_REGION_SIZE)
> +
> +#ifdef CONFIG_64BIT
> +#define VMALLOC_MODULE_START   BPF_JIT_REGION_END
> +#define VMALLOC_MODULE_END     (((unsigned long)&_start & PAGE_MASK) + SZ_2G)
> +#endif
>
>  /*
>   * Roughly size the vmemmap space to be large enough to fit enough
> @@ -57,9 +63,16 @@
>  #define FIXADDR_SIZE     PGDIR_SIZE
>  #endif
>  #define FIXADDR_START    (FIXADDR_TOP - FIXADDR_SIZE)
> -
>  #endif
>
> +#ifndef __ASSEMBLY__
> +
> +/* Page Upper Directory not used in RISC-V */
> +#include <asm-generic/pgtable-nopud.h>
> +#include <asm/page.h>
> +#include <asm/tlbflush.h>
> +#include <linux/mm_types.h>
> +
>  #ifdef CONFIG_64BIT
>  #include <asm/pgtable-64.h>
>  #else
> @@ -483,6 +496,7 @@ static inline void __kernel_map_pages(struct page *page, int numpages, int enabl
>
>  #define kern_addr_valid(addr)   (1) /* FIXME */
>
> +extern char _start[];
>  extern void *dtb_early_va;
>  void setup_bootmem(void);
>  void paging_init(void);
> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> index 98a406474e7d..8f5bb7731327 100644
> --- a/arch/riscv/kernel/head.S
> +++ b/arch/riscv/kernel/head.S
> @@ -49,7 +49,8 @@ ENTRY(_start)
>  #ifdef CONFIG_MMU
>  relocate:
>         /* Relocate return address */
> -       li a1, PAGE_OFFSET
> +       la a1, kernel_virt_addr
> +       REG_L a1, 0(a1)
>         la a2, _start
>         sub a1, a1, a2
>         add ra, ra, a1
> diff --git a/arch/riscv/kernel/module.c b/arch/riscv/kernel/module.c
> index 8bbe5dbe1341..1a8fbe05accf 100644
> --- a/arch/riscv/kernel/module.c
> +++ b/arch/riscv/kernel/module.c
> @@ -392,12 +392,10 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
>  }
>
>  #if defined(CONFIG_MMU) && defined(CONFIG_64BIT)
> -#define VMALLOC_MODULE_START \
> -        max(PFN_ALIGN((unsigned long)&_end - SZ_2G), VMALLOC_START)
>  void *module_alloc(unsigned long size)
>  {
>         return __vmalloc_node_range(size, 1, VMALLOC_MODULE_START,
> -                                   VMALLOC_END, GFP_KERNEL,
> +                                   VMALLOC_MODULE_END, GFP_KERNEL,
>                                     PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE,
>                                     __builtin_return_address(0));
>  }
> diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
> index 0339b6bbe11a..a9abde62909f 100644
> --- a/arch/riscv/kernel/vmlinux.lds.S
> +++ b/arch/riscv/kernel/vmlinux.lds.S
> @@ -4,7 +4,8 @@
>   * Copyright (C) 2017 SiFive
>   */
>
> -#define LOAD_OFFSET PAGE_OFFSET
> +#include <asm/pgtable.h>
> +#define LOAD_OFFSET KERNEL_LINK_ADDR
>  #include <asm/vmlinux.lds.h>
>  #include <asm/page.h>
>  #include <asm/cache.h>
> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> index 736de6c8739f..37be2eb45e58 100644
> --- a/arch/riscv/mm/init.c
> +++ b/arch/riscv/mm/init.c
> @@ -22,6 +22,9 @@
>
>  #include "../kernel/head.h"
>
> +unsigned long kernel_virt_addr = KERNEL_VIRT_ADDR;
> +EXPORT_SYMBOL(kernel_virt_addr);
> +
>  unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]
>                                                         __page_aligned_bss;
>  EXPORT_SYMBOL(empty_zero_page);
> @@ -178,8 +181,12 @@ void __init setup_bootmem(void)
>  }
>
>  #ifdef CONFIG_MMU
> +/* Offset between linear mapping virtual address and kernel load address */
>  unsigned long va_pa_offset;
>  EXPORT_SYMBOL(va_pa_offset);
> +/* Offset between kernel mapping virtual address and kernel load address */
> +unsigned long va_kernel_pa_offset;
> +EXPORT_SYMBOL(va_kernel_pa_offset);
>  unsigned long pfn_base;
>  EXPORT_SYMBOL(pfn_base);
>
> @@ -271,7 +278,7 @@ static phys_addr_t __init alloc_pmd(uintptr_t va)
>         if (mmu_enabled)
>                 return memblock_phys_alloc(PAGE_SIZE, PAGE_SIZE);
>
> -       pmd_num = (va - PAGE_OFFSET) >> PGDIR_SHIFT;
> +       pmd_num = (va - kernel_virt_addr) >> PGDIR_SHIFT;
>         BUG_ON(pmd_num >= NUM_EARLY_PMDS);
>         return (uintptr_t)&early_pmd[pmd_num * PTRS_PER_PMD];
>  }
> @@ -372,14 +379,30 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
>  #error "setup_vm() is called from head.S before relocate so it should not use absolute addressing."
>  #endif
>
> +static uintptr_t load_pa, load_sz;
> +
> +void create_kernel_page_table(pgd_t *pgdir, uintptr_t map_size)

It could be static if this function is only used in this file, as
kbuild test reported.
Apart from this, it looks good to me.
Reviewed-by: Zong Li <zong.li@...ive.com>

> +{
> +       uintptr_t va, end_va;
> +
> +       end_va = kernel_virt_addr + load_sz;
> +       for (va = kernel_virt_addr; va < end_va; va += map_size)
> +               create_pgd_mapping(pgdir, va,
> +                                  load_pa + (va - kernel_virt_addr),
> +                                  map_size, PAGE_KERNEL_EXEC);
> +}
> +
>  asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>  {
>         uintptr_t va, end_va;
> -       uintptr_t load_pa = (uintptr_t)(&_start);
> -       uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
>         uintptr_t map_size = best_map_size(load_pa, MAX_EARLY_MAPPING_SIZE);
>
> +       load_pa = (uintptr_t)(&_start);
> +       load_sz = (uintptr_t)(&_end) - load_pa;
> +
>         va_pa_offset = PAGE_OFFSET - load_pa;
> +       va_kernel_pa_offset = kernel_virt_addr - load_pa;
> +
>         pfn_base = PFN_DOWN(load_pa);
>
>         /*
> @@ -402,26 +425,22 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>         create_pmd_mapping(fixmap_pmd, FIXADDR_START,
>                            (uintptr_t)fixmap_pte, PMD_SIZE, PAGE_TABLE);
>         /* Setup trampoline PGD and PMD */
> -       create_pgd_mapping(trampoline_pg_dir, PAGE_OFFSET,
> +       create_pgd_mapping(trampoline_pg_dir, kernel_virt_addr,
>                            (uintptr_t)trampoline_pmd, PGDIR_SIZE, PAGE_TABLE);
> -       create_pmd_mapping(trampoline_pmd, PAGE_OFFSET,
> +       create_pmd_mapping(trampoline_pmd, kernel_virt_addr,
>                            load_pa, PMD_SIZE, PAGE_KERNEL_EXEC);
>  #else
>         /* Setup trampoline PGD */
> -       create_pgd_mapping(trampoline_pg_dir, PAGE_OFFSET,
> +       create_pgd_mapping(trampoline_pg_dir, kernel_virt_addr,
>                            load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
>  #endif
>
>         /*
> -        * Setup early PGD covering entire kernel which will allows
> +        * Setup early PGD covering entire kernel which will allow
>          * us to reach paging_init(). We map all memory banks later
>          * in setup_vm_final() below.
>          */
> -       end_va = PAGE_OFFSET + load_sz;
> -       for (va = PAGE_OFFSET; va < end_va; va += map_size)
> -               create_pgd_mapping(early_pg_dir, va,
> -                                  load_pa + (va - PAGE_OFFSET),
> -                                  map_size, PAGE_KERNEL_EXEC);
> +       create_kernel_page_table(early_pg_dir, map_size);
>
>         /* Create fixed mapping for early FDT parsing */
>         end_va = __fix_to_virt(FIX_FDT) + FIX_FDT_SIZE;
> @@ -441,6 +460,7 @@ static void __init setup_vm_final(void)
>         uintptr_t va, map_size;
>         phys_addr_t pa, start, end;
>         struct memblock_region *reg;
> +       static struct vm_struct vm_kernel = { 0 };
>
>         /* Set mmu_enabled flag */
>         mmu_enabled = true;
> @@ -467,10 +487,22 @@ static void __init setup_vm_final(void)
>                 for (pa = start; pa < end; pa += map_size) {
>                         va = (uintptr_t)__va(pa);
>                         create_pgd_mapping(swapper_pg_dir, va, pa,
> -                                          map_size, PAGE_KERNEL_EXEC);
> +                                          map_size, PAGE_KERNEL);
>                 }
>         }
>
> +       /* Map the kernel */
> +       create_kernel_page_table(swapper_pg_dir, PMD_SIZE);
> +
> +       /* Reserve the vmalloc area occupied by the kernel */
> +       vm_kernel.addr = (void *)kernel_virt_addr;
> +       vm_kernel.phys_addr = load_pa;
> +       vm_kernel.size = (load_sz + PMD_SIZE - 1) & ~(PMD_SIZE - 1);
> +       vm_kernel.flags = VM_MAP | VM_NO_GUARD;
> +       vm_kernel.caller = __builtin_return_address(0);
> +
> +       vm_area_add_early(&vm_kernel);
> +
>         /* Clear fixmap PTE and PMD mappings */
>         clear_fixmap(FIX_PTE);
>         clear_fixmap(FIX_PMD);
> diff --git a/arch/riscv/mm/physaddr.c b/arch/riscv/mm/physaddr.c
> index e8e4dcd39fed..35703d5ef5fd 100644
> --- a/arch/riscv/mm/physaddr.c
> +++ b/arch/riscv/mm/physaddr.c
> @@ -23,7 +23,7 @@ EXPORT_SYMBOL(__virt_to_phys);
>
>  phys_addr_t __phys_addr_symbol(unsigned long x)
>  {
> -       unsigned long kernel_start = (unsigned long)PAGE_OFFSET;
> +       unsigned long kernel_start = (unsigned long)kernel_virt_addr;
>         unsigned long kernel_end = (unsigned long)_end;
>
>         /*
> --
> 2.20.1
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ