| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200605224403.181015-3-sebastian.reichel@collabora.com>
Date: Sat, 6 Jun 2020 00:43:59 +0200
From: Sebastian Reichel <sebastian.reichel@...labora.com>
To: Sebastian Reichel <sre@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Emil Velikov <emil.velikov@...labora.com>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Daniel Mack <daniel@...que.org>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Robert Jarzmik <robert.jarzmik@...e.fr>,
Russell King <linux@...linux.org.uk>, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
kernel@...labora.com, linux-arm-kernel@...ts.infradead.org,
Sebastian Reichel <sebastian.reichel@...labora.com>
Subject: [PATCHv2 2/6] power: supply: gpio-charger: Make gpios optional
While strongly recommended, not all devices have a gpio to
detect if the charger is connected. This moves the 'gpios'
from required to optional section.
This also modifies error handling for the GPIO a bit: We
no longer fallback to pdata, if a GPIO is specified using
GPIO descriptor tables. This is a bit cleaner and does
not have any real impact: There are only two mainline pdata
users (arm/mach-sa1100/collie.c, arm/mach-pxa/tosa.c) and
none of them specify the GPIO via gpiod descriptor tables.
Once both have been converted the driver's support for
specifying GPIOs numbers in pdata will be dropped.
Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.com>
---
.../bindings/power/supply/gpio-charger.yaml | 7 +++-
drivers/power/supply/gpio-charger.c | 38 ++++++++++++-------
2 files changed, 31 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
index 78b167c62ab1..30eabbb14ef3 100644
--- a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
@@ -41,7 +41,12 @@ properties:
required:
- compatible
- - gpios
+
+anyOf:
+ - required:
+ - gpios
+ - required:
+ - charge-status-gpios
additionalProperties: false
diff --git a/drivers/power/supply/gpio-charger.c b/drivers/power/supply/gpio-charger.c
index 1b959c7f8b0e..875735d50716 100644
--- a/drivers/power/supply/gpio-charger.c
+++ b/drivers/power/supply/gpio-charger.c
@@ -112,9 +112,14 @@ static int gpio_charger_get_irq(struct device *dev, void *dev_id,
return irq;
}
+/*
+ * The entries will be overwritten by driver's probe routine depending
+ * on the available features. This list ensures, that the array is big
+ * enough for all optional features.
+ */
static enum power_supply_property gpio_charger_properties[] = {
POWER_SUPPLY_PROP_ONLINE,
- POWER_SUPPLY_PROP_STATUS /* Must always be last in the array. */
+ POWER_SUPPLY_PROP_STATUS,
};
static int gpio_charger_probe(struct platform_device *pdev)
@@ -128,6 +133,7 @@ static int gpio_charger_probe(struct platform_device *pdev)
int charge_status_irq;
unsigned long flags;
int ret;
+ int num_props = 0;
if (!pdata && !dev->of_node) {
dev_err(dev, "No platform data\n");
@@ -142,13 +148,13 @@ static int gpio_charger_probe(struct platform_device *pdev)
* This will fetch a GPIO descriptor from device tree, ACPI or
* boardfile descriptor tables. It's good to try this first.
*/
- gpio_charger->gpiod = devm_gpiod_get(dev, NULL, GPIOD_IN);
+ gpio_charger->gpiod = devm_gpiod_get_optional(dev, NULL, GPIOD_IN);
/*
- * If this fails and we're not using device tree, try the
- * legacy platform data method.
+ * Fallback to legacy platform data method, if no GPIO is specified
+ * using boardfile descriptor tables.
*/
- if (IS_ERR(gpio_charger->gpiod) && !dev->of_node) {
+ if (!gpio_charger->gpiod && pdata) {
/* Non-DT: use legacy GPIO numbers */
if (!gpio_is_valid(pdata->gpio)) {
dev_err(dev, "Invalid gpio pin in pdata\n");
@@ -173,17 +179,23 @@ static int gpio_charger_probe(struct platform_device *pdev)
return PTR_ERR(gpio_charger->gpiod);
}
+ if (gpio_charger->gpiod) {
+ gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_ONLINE;
+ num_props++;
+ }
+
charge_status = devm_gpiod_get_optional(dev, "charge-status", GPIOD_IN);
- gpio_charger->charge_status = charge_status;
- if (IS_ERR(gpio_charger->charge_status))
- return PTR_ERR(gpio_charger->charge_status);
+ if (IS_ERR(charge_status))
+ return PTR_ERR(charge_status);
+ if (charge_status) {
+ gpio_charger->charge_status = charge_status;
+ gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_STATUS;
+ num_props++;
+ }
charger_desc = &gpio_charger->charger_desc;
charger_desc->properties = gpio_charger_properties;
- charger_desc->num_properties = ARRAY_SIZE(gpio_charger_properties);
- /* Remove POWER_SUPPLY_PROP_STATUS from the supported properties. */
- if (!gpio_charger->charge_status)
- charger_desc->num_properties -= 1;
+ charger_desc->num_properties = num_props;
charger_desc->get_property = gpio_charger_get_property;
psy_cfg.of_node = dev->of_node;
@@ -269,6 +281,6 @@ static struct platform_driver gpio_charger_driver = {
module_platform_driver(gpio_charger_driver);
MODULE_AUTHOR("Lars-Peter Clausen <lars@...afoo.de>");
-MODULE_DESCRIPTION("Driver for chargers which report their online status through a GPIO");
+MODULE_DESCRIPTION("Driver for chargers only communicating via GPIO(s)");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:gpio-charger");
--
2.26.2
Powered by blists - more mailing lists