[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200605122558.2882712-1-sashal@kernel.org>
Date: Fri, 5 Jun 2020 08:25:49 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Stephan Gerhold <stephan@...hold.net>,
Andi Shyti <andi@...zian.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Sasha Levin <sashal@...nel.org>, linux-input@...r.kernel.org
Subject: [PATCH AUTOSEL 4.19 1/9] Input: mms114 - fix handling of mms345l
From: Stephan Gerhold <stephan@...hold.net>
[ Upstream commit 3f8f770575d911c989043d8f0fb8dec96360c41c ]
MMS345L is another first generation touch screen from Melfas,
which uses the same registers as MMS152.
However, using I2C_M_NOSTART for it causes errors when reading:
i2c i2c-0: sendbytes: NAK bailout.
mms114 0-0048: __mms114_read_reg: i2c transfer failed (-5)
The driver works fine as soon as I2C_M_NOSTART is removed.
Reviewed-by: Andi Shyti <andi@...zian.org>
Signed-off-by: Stephan Gerhold <stephan@...hold.net>
Link: https://lore.kernel.org/r/20200405170904.61512-1-stephan@gerhold.net
[dtor: removed separate mms345l handling, made everyone use standard
transfer mode, propagated the 10bit addressing flag to the read part of the
transfer as well.]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/input/touchscreen/mms114.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c
index a5ab774da4cc..fca908ba4841 100644
--- a/drivers/input/touchscreen/mms114.c
+++ b/drivers/input/touchscreen/mms114.c
@@ -91,15 +91,15 @@ static int __mms114_read_reg(struct mms114_data *data, unsigned int reg,
if (reg <= MMS114_MODE_CONTROL && reg + len > MMS114_MODE_CONTROL)
BUG();
- /* Write register: use repeated start */
+ /* Write register */
xfer[0].addr = client->addr;
- xfer[0].flags = I2C_M_TEN | I2C_M_NOSTART;
+ xfer[0].flags = client->flags & I2C_M_TEN;
xfer[0].len = 1;
xfer[0].buf = &buf;
/* Read data */
xfer[1].addr = client->addr;
- xfer[1].flags = I2C_M_RD;
+ xfer[1].flags = (client->flags & I2C_M_TEN) | I2C_M_RD;
xfer[1].len = len;
xfer[1].buf = val;
@@ -428,10 +428,8 @@ static int mms114_probe(struct i2c_client *client,
const void *match_data;
int error;
- if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_PROTOCOL_MANGLING)) {
- dev_err(&client->dev,
- "Need i2c bus that supports protocol mangling\n");
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "Not supported I2C adapter\n");
return -ENODEV;
}
--
2.25.1
Powered by blists - more mailing lists