[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200605140253.943782986@linuxfoundation.org>
Date: Fri, 5 Jun 2020 16:15:28 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Valentin Longchamp <valentin@...gchamp.me>,
Matteo Ghidoni <matteo.ghidoni@...abb.com>,
"David S. Miller" <davem@...emloft.net>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.19 26/28] net/ethernet/freescale: rework quiesce/activate for ucc_geth
From: Valentin Longchamp <valentin@...gchamp.me>
[ Upstream commit 79dde73cf9bcf1dd317a2667f78b758e9fe139ed ]
ugeth_quiesce/activate are used to halt the controller when there is a
link change that requires to reconfigure the mac.
The previous implementation called netif_device_detach(). This however
causes the initial activation of the netdevice to fail precisely because
it's detached. For details, see [1].
A possible workaround was the revert of commit
net: linkwatch: add check for netdevice being present to linkwatch_do_dev
However, the check introduced in the above commit is correct and shall be
kept.
The netif_device_detach() is thus replaced with
netif_tx_stop_all_queues() that prevents any tranmission. This allows to
perform mac config change required by the link change, without detaching
the corresponding netdevice and thus not preventing its initial
activation.
[1] https://lists.openwall.net/netdev/2020/01/08/201
Signed-off-by: Valentin Longchamp <valentin@...gchamp.me>
Acked-by: Matteo Ghidoni <matteo.ghidoni@...abb.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/net/ethernet/freescale/ucc_geth.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index a5bf02ae4bc5..5de6f7c73c1f 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -45,6 +45,7 @@
#include <soc/fsl/qe/ucc.h>
#include <soc/fsl/qe/ucc_fast.h>
#include <asm/machdep.h>
+#include <net/sch_generic.h>
#include "ucc_geth.h"
@@ -1551,11 +1552,8 @@ static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode)
static void ugeth_quiesce(struct ucc_geth_private *ugeth)
{
- /* Prevent any further xmits, plus detach the device. */
- netif_device_detach(ugeth->ndev);
-
- /* Wait for any current xmits to finish. */
- netif_tx_disable(ugeth->ndev);
+ /* Prevent any further xmits */
+ netif_tx_stop_all_queues(ugeth->ndev);
/* Disable the interrupt to avoid NAPI rescheduling. */
disable_irq(ugeth->ug_info->uf_info.irq);
@@ -1568,7 +1566,10 @@ static void ugeth_activate(struct ucc_geth_private *ugeth)
{
napi_enable(&ugeth->napi);
enable_irq(ugeth->ug_info->uf_info.irq);
- netif_device_attach(ugeth->ndev);
+
+ /* allow to xmit again */
+ netif_tx_wake_all_queues(ugeth->ndev);
+ __netdev_watchdog_up(ugeth->ndev);
}
/* Called every time the controller might need to be made
--
2.25.1
Powered by blists - more mailing lists