| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200607163025.8409-6-andrey.konovalov@linaro.org>
Date: Sun, 7 Jun 2020 19:30:20 +0300
From: Andrey Konovalov <andrey.konovalov@...aro.org>
To: mchehab@...nel.org, sakari.ailus@....fi,
manivannan.sadhasivam@...aro.org
Cc: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
c.barrett@...mos.com, a.brela@...mos.com, peter.griffin@...aro.org,
Andrey Konovalov <andrey.konovalov@...aro.org>
Subject: [PATCH v4 05/10] media: i2c: imx290: Add configurable link frequency and pixel rate
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
IMX290 operates with multiple link frequency and pixel rate combinations.
The initial driver used a single setting for both but since we now have
the lane count support in place, let's add configurable link frequency
and pixel rate.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@...aro.org>
---
drivers/media/i2c/imx290.c | 148 +++++++++++++++++++++++++++----------
1 file changed, 109 insertions(+), 39 deletions(-)
diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index ffb393962ffc..152b65cb7cbc 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -32,8 +32,6 @@
#define IMX290_PHY_LANE_NUM 0x3407
#define IMX290_CSI_LANE_MODE 0x3443
-#define IMX290_DEFAULT_LINK_FREQ 445500000
-
static const char * const imx290_supply_name[] = {
"vdda",
"vddd",
@@ -51,8 +49,7 @@ struct imx290_mode {
u32 width;
u32 height;
u32 hmax;
- u32 pixel_rate;
- u32 link_freq_index;
+ u8 link_freq_index;
const struct imx290_regval *data;
u32 data_size;
@@ -243,29 +240,54 @@ static const struct imx290_regval imx290_10bit_settings[] = {
};
/* supported link frequencies */
-static const s64 imx290_link_freq[] = {
- IMX290_DEFAULT_LINK_FREQ,
+#define FREQ_INDEX_1080P 0
+#define FREQ_INDEX_720P 1
+static const s64 imx290_link_freq_2lanes[] = {
+ [FREQ_INDEX_1080P] = 445500000,
+ [FREQ_INDEX_720P] = 297000000,
+};
+static const s64 imx290_link_freq_4lanes[] = {
+ [FREQ_INDEX_1080P] = 222750000,
+ [FREQ_INDEX_720P] = 148500000,
};
+/*
+ * In this function and in the similar ones below We rely on imx290_probe()
+ * to ensure that nlanes is either 2 or 4.
+ */
+static inline const s64 *imx290_link_freqs_ptr(const struct imx290 *imx290)
+{
+ if (imx290->nlanes == 2)
+ return imx290_link_freq_2lanes;
+ else
+ return imx290_link_freq_4lanes;
+}
+
+static inline int imx290_link_freqs_num(const struct imx290 *imx290)
+{
+ if (imx290->nlanes == 2)
+ return ARRAY_SIZE(imx290_link_freq_2lanes);
+ else
+ return ARRAY_SIZE(imx290_link_freq_4lanes);
+}
+
/* Mode configs */
static const struct imx290_mode imx290_modes_2lanes[] = {
{
.width = 1920,
.height = 1080,
.hmax = 0x1130,
+ .link_freq_index = FREQ_INDEX_1080P,
.data = imx290_1080p_settings,
.data_size = ARRAY_SIZE(imx290_1080p_settings),
- .pixel_rate = 178200000,
- .link_freq_index = 0,
},
{
.width = 1280,
.height = 720,
.hmax = 0x19c8,
+ .link_freq_index = FREQ_INDEX_720P,
.data = imx290_720p_settings,
.data_size = ARRAY_SIZE(imx290_720p_settings),
- .pixel_rate = 178200000,
- .link_freq_index = 0,
},
};
@@ -274,25 +296,22 @@ static const struct imx290_mode imx290_modes_4lanes[] = {
.width = 1920,
.height = 1080,
.hmax = 0x0898,
+ .link_freq_index = FREQ_INDEX_1080P,
.data = imx290_1080p_settings,
.data_size = ARRAY_SIZE(imx290_1080p_settings),
- .pixel_rate = 178200000,
- .link_freq_index = 0,
},
{
.width = 1280,
.height = 720,
.hmax = 0x0ce4,
+ .link_freq_index = FREQ_INDEX_720P,
.data = imx290_720p_settings,
.data_size = ARRAY_SIZE(imx290_720p_settings),
- .pixel_rate = 178200000,
- .link_freq_index = 0,
},
};
static inline const struct imx290_mode *imx290_modes_ptr(const struct imx290 *imx290)
{
- /* We rely on imx290_probe() to ensure that nlanes is either 2 or 4 */
if (imx290->nlanes == 2)
return imx290_modes_2lanes;
else
@@ -477,6 +496,30 @@ static int imx290_get_fmt(struct v4l2_subdev *sd,
return 0;
}
+static inline u8 imx290_get_link_freq_index(struct imx290 *imx290)
+{
+ return imx290->current_mode->link_freq_index;
+}
+
+static s64 imx290_get_link_freq(struct imx290 *imx290)
+{
+ u8 index = imx290_get_link_freq_index(imx290);
+
+ return *(imx290_link_freqs_ptr(imx290) + index);
+}
+
+static u64 imx290_calc_pixel_rate(struct imx290 *imx290)
+{
+ s64 link_freq = imx290_get_link_freq(imx290);
+ u8 nlanes = imx290->nlanes;
+ u64 pixel_rate;
+
+ /* pixel rate = link_freq * 2 * nr_of_lanes / bits_per_sample */
+ pixel_rate = link_freq * 2 * nlanes;
+ do_div(pixel_rate, 10);
+ return pixel_rate;
+}
+
static int imx290_set_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
@@ -509,10 +552,14 @@ static int imx290_set_fmt(struct v4l2_subdev *sd,
format = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
} else {
format = &imx290->current_format;
- __v4l2_ctrl_s_ctrl(imx290->link_freq, mode->link_freq_index);
- __v4l2_ctrl_s_ctrl_int64(imx290->pixel_rate, mode->pixel_rate);
-
imx290->current_mode = mode;
+
+ if (imx290->link_freq)
+ __v4l2_ctrl_s_ctrl(imx290->link_freq,
+ imx290_get_link_freq_index(imx290));
+ if (imx290->pixel_rate)
+ __v4l2_ctrl_s_ctrl_int64(imx290->pixel_rate,
+ imx290_calc_pixel_rate(imx290));
}
*format = fmt->format;
@@ -536,12 +583,11 @@ static int imx290_entity_init_cfg(struct v4l2_subdev *subdev,
return 0;
}
-static int imx290_write_current_format(struct imx290 *imx290,
- struct v4l2_mbus_framefmt *format)
+static int imx290_write_current_format(struct imx290 *imx290)
{
int ret;
- switch (format->code) {
+ switch (imx290->current_format.code) {
case MEDIA_BUS_FMT_SRGGB10_1X10:
ret = imx290_set_register_array(imx290, imx290_10bit_settings,
ARRAY_SIZE(
@@ -592,8 +638,8 @@ static int imx290_start_streaming(struct imx290 *imx290)
return ret;
}
- /* Set current frame format */
- ret = imx290_write_current_format(imx290, &imx290->current_format);
+ /* Apply the register values related to current frame format */
+ ret = imx290_write_current_format(imx290);
if (ret < 0) {
dev_err(imx290->dev, "Could not set frame format\n");
return ret;
@@ -776,13 +822,34 @@ static const struct media_entity_operations imx290_subdev_entity_ops = {
.link_validate = v4l2_subdev_link_validate,
};
+/*
+ * Returns 0 if all link frequencies used by the driver for the given number
+ * of MIPI data lanes are mentioned in the device tree, or the value of the
+ * first missing frequency otherwise.
+ */
+static s64 imx290_check_link_freqs(const struct imx290 *imx290)
+{
+ int i, j;
+ const s64 *freqs = imx290_link_freqs_ptr(imx290);
+ int freqs_count = imx290_link_freqs_num(imx290);
+
+ for (i = 0; i < freqs_count; i++) {
+ for (j = 0; j < imx290->ep.nr_of_link_frequencies; j++)
+ if (freqs[i] == imx290->ep.link_frequencies[j])
+ break;
+ if (j == imx290->ep.nr_of_link_frequencies)
+ return freqs[i];
+ }
+ return 0;
+}
+
static int imx290_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct fwnode_handle *endpoint;
struct imx290 *imx290;
u32 xclk_freq;
- u32 default_pixel_rate;
+ s64 fq;
int ret;
imx290 = devm_kzalloc(dev, sizeof(*imx290), GFP_KERNEL);
@@ -825,8 +892,10 @@ static int imx290_probe(struct i2c_client *client)
goto free_err;
}
- if (imx290->ep.link_frequencies[0] != IMX290_DEFAULT_LINK_FREQ) {
- dev_err(dev, "Unsupported link frequency\n");
+ /* Check that link frequences for all the modes are in device tree */
+ fq = imx290_check_link_freqs(imx290);
+ if (fq) {
+ dev_err(dev, "Link frequency of %lld is not supported\n", fq);
ret = -EINVAL;
goto free_err;
}
@@ -883,26 +952,30 @@ static int imx290_probe(struct i2c_client *client)
mutex_init(&imx290->lock);
+ /*
+ * Initialize the frame format. In particular, imx290->current_mode
+ * and imx290->bpp are set to defaults: imx290_calc_pixel_rate() call
+ * below relies on these fields.
+ */
+ imx290_entity_init_cfg(&imx290->sd, NULL);
+
v4l2_ctrl_handler_init(&imx290->ctrls, 3);
v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
V4L2_CID_GAIN, 0, 72, 1, 0);
+
imx290->link_freq =
- v4l2_ctrl_new_int_menu(&imx290->ctrls,
- &imx290_ctrl_ops,
+ v4l2_ctrl_new_int_menu(&imx290->ctrls, &imx290_ctrl_ops,
V4L2_CID_LINK_FREQ,
- ARRAY_SIZE(imx290_link_freq) - 1,
- 0, imx290_link_freq);
+ imx290_link_freqs_num(imx290) - 1, 0,
+ imx290_link_freqs_ptr(imx290));
if (imx290->link_freq)
imx290->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
- default_pixel_rate = imx290->nlanes == 2 ?
- imx290_modes_2lanes[0].pixel_rate :
- imx290_modes_4lanes[0].pixel_rate;
imx290->pixel_rate = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
- V4L2_CID_PIXEL_RATE, 1,
- INT_MAX, 1,
- default_pixel_rate);
+ V4L2_CID_PIXEL_RATE,
+ 1, INT_MAX, 1,
+ imx290_calc_pixel_rate(imx290));
imx290->sd.ctrl_handler = &imx290->ctrls;
@@ -926,9 +999,6 @@ static int imx290_probe(struct i2c_client *client)
goto free_ctrl;
}
- /* Initialize the frame format (this also sets imx290->current_mode) */
- imx290_entity_init_cfg(&imx290->sd, NULL);
-
ret = v4l2_async_register_subdev(&imx290->sd);
if (ret < 0) {
dev_err(dev, "Could not register v4l2 device\n");
--
2.17.1
Powered by blists - more mailing lists