| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1591555267-21822-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Sun, 7 Jun 2020 19:40:59 +0100
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
To: Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Rob Herring <robh+dt@...nel.org>
Cc: linux-renesas-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Prabhakar <prabhakar.csengg@...il.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: [PATCH 03/11] arm64: dts: renesas: hihope-common: Separate out Rev.2.0 specific into hihope-common-rev2.dtsi file
Separate out Rev.2.0 specific hardware changes into
hihope-common-rev2.dtsi file so that hihope-common.dtsi can be used
by all the variants for RZ/G2M[N] boards.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@...renesas.com>
---
.../boot/dts/renesas/hihope-common-rev2.dtsi | 101 ++++++++++++++++++
.../arm64/boot/dts/renesas/hihope-common.dtsi | 87 +--------------
.../renesas/r8a774a1-hihope-rzg2m-rev2.dts | 1 +
.../renesas/r8a774b1-hihope-rzg2n-rev2.dts | 1 +
4 files changed, 105 insertions(+), 85 deletions(-)
create mode 100644 arch/arm64/boot/dts/renesas/hihope-common-rev2.dtsi
diff --git a/arch/arm64/boot/dts/renesas/hihope-common-rev2.dtsi b/arch/arm64/boot/dts/renesas/hihope-common-rev2.dtsi
new file mode 100644
index 000000000000..66c34fc9e7a5
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-common-rev2.dtsi
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2[MN] main board Rev.2.0 common
+ * parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+
+ bt_active_led {
+ label = "blue:bt";
+ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "hci0-power";
+ default-state = "off";
+ };
+
+ led0 {
+ gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ led1 {
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ led2 {
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ led3 {
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan_active_led {
+ label = "yellow:wlan";
+ gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+ };
+
+ wlan_en_reg: regulator-wlan_en {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <70000>;
+
+ gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&hscif0 {
+ bluetooth {
+ compatible = "ti,wl1837-st";
+ enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c4 {
+ gpio_expander: gpio@20 {
+ compatible = "onnn,pca9654";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&pfc {
+ sound_clk_pins: sound_clk {
+ groups = "audio_clk_a_a";
+ function = "audio_clk";
+ };
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_clk_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ rsnd_port: port {
+ rsnd_endpoint: endpoint {
+ remote-endpoint = <&dw_hdmi0_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint>;
+ frame-master = <&rsnd_endpoint>;
+
+ playback = <&ssi2>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index bd056904e8bd..4efcdebd8842 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the HiHope RZ/G2[MN] main board common parts
+ * Device Tree Source for the HiHope RZ/G2[MN] main board
+ * Rev.[2.0/3.0/4.0] common parts
*
* Copyright (C) 2019 Renesas Electronics Corp.
*/
@@ -29,40 +30,6 @@
};
};
- leds {
- compatible = "gpio-leds";
-
- bt_active_led {
- label = "blue:bt";
- gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "hci0-power";
- default-state = "off";
- };
-
- led0 {
- gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
- };
-
- led1 {
- gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
- };
-
- led2 {
- gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
- };
-
- led3 {
- gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
- };
-
- wlan_active_led {
- label = "yellow:wlan";
- gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tx";
- default-state = "off";
- };
- };
-
reg_1p8v: regulator0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
@@ -112,17 +79,6 @@
states = <3300000 1>, <1800000 0>;
};
- wlan_en_reg: regulator-wlan_en {
- compatible = "regulator-fixed";
- regulator-name = "wlan-en-regulator";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- startup-delay-us = <70000>;
-
- gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
x302_clk: x302-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -194,11 +150,6 @@
uart-has-rtscts;
status = "okay";
-
- bluetooth {
- compatible = "ti,wl1837-st";
- enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>;
- };
};
&hsusb {
@@ -210,13 +161,6 @@
clock-frequency = <400000>;
status = "okay";
- gpio_expander: gpio@20 {
- compatible = "onnn,pca9654";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
versaclock5: clock-generator@6a {
compatible = "idt,5p49v5923";
reg = <0x6a>;
@@ -281,11 +225,6 @@
power-source = <1800>;
};
- sound_clk_pins: sound_clk {
- groups = "audio_clk_a_a";
- function = "audio_clk";
- };
-
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
@@ -309,28 +248,6 @@
};
};
-&rcar_sound {
- pinctrl-0 = <&sound_clk_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- /* Single DAI */
- #sound-dai-cells = <0>;
-
- rsnd_port: port {
- rsnd_endpoint: endpoint {
- remote-endpoint = <&dw_hdmi0_snd_in>;
-
- dai-format = "i2s";
- bitclock-master = <&rsnd_endpoint>;
- frame-master = <&rsnd_endpoint>;
-
- playback = <&ssi2>;
- };
- };
-};
-
&rwdt {
timeout-sec = <60>;
status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts
index 276f449ad14e..e7eea3225abe 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "r8a774a1.dtsi"
#include "hihope-common.dtsi"
+#include "hihope-common-rev2.dtsi"
/ {
model = "HopeRun HiHope RZ/G2M main board (Rev.2.0) based on r8a774a1";
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts
index eb1206b2d97a..ecb527356f37 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "r8a774b1.dtsi"
#include "hihope-common.dtsi"
+#include "hihope-common-rev2.dtsi"
/ {
model = "HopeRun HiHope RZ/G2N main board (Rev.2.0) based on r8a774b1";
--
2.17.1
Powered by blists - more mailing lists